1 287 Electrical Engineer jobs in Saudi Arabia
Control Systems Engineer
Posted 4 days ago
Job Viewed
Job Description
Job Title: Control Systems Engineer
Location: Offshore (rotation basis on board Saipem vessel)
About us:
Saipem is a global leader in engineering services for the design, construction and operation of complex infrastructures and plants in the energy sector, both offshore and onshore.
With our five business lines - Asset Based Services, Energy Carriers, Offshore Wind, Sustainable Infrastructures, Robotics & Industrialized Solutions - we are One Company present in around 60 countries with over 30,000 employees of more than 130 nationalities, providing the world the innovative excellence of our people and our partners for over 65 years.
Mission
- Execute engineering tasks related to Control and Telecommunication Systems under the supervision of the Instrumentation Discipline Lead.
- Ensure design compliance with technical requirements, safety standards, and quality expectations.
- Coordinate with project stakeholders and oversee technical activities carried out internally or by subcontractors to ensure seamless system integration and commissioning.
Key Responsibilities
A. Development of Technology Know-How and Commercial Support
- Contribute to the development of internal technological expertise for control systems.
- Support commercial efforts by providing control system input for proposals and technical clarifications.
B. Feasibility Studies
- Assist in the evaluation of technical feasibility for new projects or modifications, ensuring compliance with engineering standards.
C. Bidding Phase / Commercial Proposal Development
- Estimate quantities and scope for Control Systems to support cost and erection works evaluation.
- Collaborate with the Discipline Lead to define man-hour budgets and cost estimates for project proposals.
D. Project Execution
- Review client technical documentation and project specifications.
- Coordinate and review subcontracted engineering activities and ensure proper documentation flow and quality.
- Define engineering design criteria, technical procedures, and system architecture.
- Prepare and validate material and service requisitions for Control and Safety Systems.
- Optimize system design for cost-efficiency while maintaining functional integrity and safety.
- Prepare supply specifications for control, safety, advanced control, dynamic simulation, and operator training systems.
- Contribute to P&ID mechanization and ensure control strategy alignment.
- Validate Vendor documentation (functional specs, detail design, BOQs).
- Coordinate detail engineering work and ensure accurate installation drawing preparation.
- Participate in Factory Acceptance Tests (FAT) at Vendor facilities.
E. Construction and Start-Up
- Participate in Site Acceptance Tests (SAT), loop checks, and functional checks offshore.
- Provide on-site technical and engineering support during construction and commissioning.
- Perform site-based engineering adjustments and optimizations as required.
Required Technical Skills
- Proficiency above basic level in:
- Visual Studio (C++)
- Python
- Object-Oriented Programming (OOP)
- Siemens TIA Portal
- Siemens WinCC
- RSLogix 5000
- SCADA systems
- Microsoft Excel (Advanced)
Required Qualifications & Experience
- Bachelor's or Master's Degree in Control Engineering, Automation, Electronics, or related fields.
- Prior offshore experience, preferably on board an EPC or oil & gas vessel.
- Strong interpersonal and coordination skills in multicultural environments.
- Proven ability to produce and review technical documentation.
- Familiarity with QA/QC and HSE principles and compliance.
How to Apply:
If you are ready to take on this challenging role and contribute to the success of Saipem's projects, please submit your CV in English by clicking on the link below.
Control Systems Engineer
Posted 4 days ago
Job Viewed
Job Description
Overview
Company : Saipem
Job Title : Control Systems Engineer
Location : Offshore (rotation basis on board Saipem vessel)
About us :
Saipem is a global leader in engineering services for the design, construction and operation of complex infrastructures and plants in the energy sector, both offshore and onshore.
With our five business lines - Asset Based Services, Energy Carriers, Offshore Wind, Sustainable Infrastructures, Robotics & Industrialized Solutions - we are One Company present in around 60 countries with over 30,000 employees of more than 130 nationalities, providing the world the innovative excellence of our people and our partners for over 65 years.
Mission
- Execute engineering tasks related to Control and Telecommunication Systems under the supervision of the Instrumentation Discipline Lead.
- Ensure design compliance with technical requirements, safety standards, and quality expectations.
- Coordinate with project stakeholders and oversee technical activities carried out internally or by subcontractors to ensure seamless system integration and commissioning.
A. Development of Technology Know-How and Commercial Support
- Contribute to the development of internal technological expertise for control systems.
- Support commercial efforts by providing control system input for proposals and technical clarifications.
B. Feasibility Studies
- Assist in the evaluation of technical feasibility for new projects or modifications, ensuring compliance with engineering standards.
C. Bidding Phase / Commercial Proposal Development
- Estimate quantities and scope for Control Systems to support cost and erection works evaluation.
- Collaborate with the Discipline Lead to define man-hour budgets and cost estimates for project proposals.
D. Project Execution
- Review client technical documentation and project specifications.
- Coordinate and review subcontracted engineering activities and ensure proper documentation flow and quality.
- Define engineering design criteria, technical procedures, and system architecture.
- Prepare and validate material and service requisitions for Control and Safety Systems.
- Optimize system design for cost-efficiency while maintaining functional integrity and safety.
- Prepare supply specifications for control, safety, advanced control, dynamic simulation, and operator training systems.
- Contribute to P&ID mechanization and ensure control strategy alignment.
- Validate Vendor documentation (functional specs, detail design, BOQs).
- Coordinate detail engineering work and ensure accurate installation drawing preparation.
- Participate in Factory Acceptance Tests (FAT) at Vendor facilities.
E. Construction and Start-Up
- Participate in Site Acceptance Tests (SAT), loop checks, and functional checks offshore.
- Provide on-site technical and engineering support during construction and commissioning.
- Perform site-based engineering adjustments and optimizations as required.
Proficiency above basic level in :
- Visual Studio (C++)
- Python
- Object-Oriented Programming (OOP)
- Siemens TIA Portal
- Siemens WinCC
- RSLogix 5000
- SCADA systems
- Microsoft Excel (Advanced)
- Bachelor's or Master's Degree in Control Engineering, Automation, Electronics, or related fields.
- Prior offshore experience, preferably on board an EPC or oil & gas vessel.
- Strong interpersonal and coordination skills in multicultural environments.
- Proven ability to produce and review technical documentation.
- Familiarity with QA / QC and HSE principles and compliance.
If you are ready to take on this challenging role and contribute to the success of Saipem's projects, please submit your CV in English by clicking on the link below.
#J-18808-LjbffrElectrical Design Engineer
Posted 2 days ago
Job Viewed
Job Description
We are looking for an Electrical Design Engineer to develop, improve, and support electrical systems for industrial applications. You will be responsible for designing distribution systems, preparing drawings, selecting materials, and supporting manufacturing and installation processes, while ensuring compliance with engineering standards and safety codes.
Responsibilities:
- Design and layout electrical distribution systems for industrial plants
- Prepare load schedules, single-line diagrams, and technical specifications
- Create system models, perform simulations, and propose design improvements
- Support material selection, vendor coordination, and technical decision-making
- Generate detailed design documentation, reports, and test requirements
- Assist in the manufacturing and installation of new electrical systems
- Forecast electrical system costs and project budgets
- Conduct field inspections, surveys, and ensure quality compliance
- Review designs for code compliance and good engineering practices
- Coordinate and lead electrical design activities across project phases
- Analyze and resolve design and operational issues as they arise
Requirements:
Education: Bachelor’s degree in electrical engineeringor anyrelated field
Experience: +5 years of experience
Languages : Professional in English
- Strong knowledge of rotating and static electrical machines
- Hands-on maintenance experience with industrial electrical equipment
- Proficiency in creating and verifying engineering drawings
- Familiarity with industry codes, standards, and best practices
Skills:
- Electrical system design and load calculation expertise
- Electrical distribution design for industrial environments
- Strong drawing preparation and verification skills (AutoCAD or similar)
- Knowledge of material selection and vendor coordination
- Experience with electrical system modeling and simulations
- Proficiency in interpreting and applying electrical codes and standards
- Excellent troubleshooting, problem-solving, and decision-making abilities
- Strong documentation and technical reporting skills
- Team coordination and leadership in multi-discipline projects
- Effective communication with vendors, engineers, and construction teams
Electrical Design Engineer
Posted 2 days ago
Job Viewed
Job Description
Responsibilities:
- Design and develop electrical systems and layouts for various projects.
- Prepare single line diagrams (SLDs), load schedules, and panel board schedules.
- Design electrical safety systems (fire alarm, emergency lighting, lightning protection, etc.).
- Ensure compliance with SBC, IEC, and NFPA standards.
- Coordinate with architects, mechanical engineers, and other disciplines.
- Review and approve shop drawings and technical submittals.
- Conduct site visits when required to ensure design implementation.
Requirements:
- Bachelor’s degree in Electrical Engineering or a related field.
- Minimum of 7–10 years of experience in engineering consultancy firms.
- Strong proficiency in AutoCAD, Revit, and electrical design software.
- Expertise in designing electrical safety systems, fire alarm, and protection systems.
- Solid knowledge of SBC, NFPA, and international electrical codes.
- Excellent communication and teamwork skills.
- Preferably holds a Professional Classification from the Saudi Council of Engineers (SCE).
- Mid-Senior level
- Full-time
- Engineering and Information Technology
- Architecture and Planning
ELECTRICAL DESIGN ENGINEER
Posted 4 days ago
Job Viewed
Job Description
Join to apply for the ELECTRICAL DESIGN ENGINEER role at Asmacs Recruitment Qatar.
Job Details- Job Code: Easy application process, usually takes less than 1 minutes.
- Experience: NA - NA yrs
- Yearly Salary: NA
- Job Location: NA
- Qualification: NA
- Qualification Specialization: NA
- Industry: NA
- Position: NA
Job Title: NA
Description: NA
Interview DetailsNot Available
Company ProfileNA
Seniority level- Entry level
- Full-time
- Engineering and Information Technology
- Outsourcing and Offshoring Consulting
Electrical Design Engineer
Posted 15 days ago
Job Viewed
Job Description
EXP Arabia is a multidisciplinary engineering design and supervisory consultant with over 100 years of experience in North America and around the world. Based throughout North America, EXP provides engineering, architecture, design and consulting services to the world’s built and natural environments.
EXP Arabia is seeking a versatile, experienced, and reliable “Electrical Design Engineer” with the following requirements:
Responsibilities- Proficient in producing working Revit MEP drawings/models.
- Proficient in producing working CAD drawings and models.
- Proficient visualizing systems in a 3D environment and utilizing clash detection software (e.g., Interference Watcher).
- Prepare Revit floor plans showing electrical device layouts, circuitry, fixtures, equipment, etc., with limited input from Engineers.
- Perform overcurrent coordination studies using SKM Powertools for proper coordination of overcurrent devices.
- Prepare electrical system design, reports, and necessary deliverables from concept through construction documents.
- Prepare one-line diagrams with input from Engineers.
- Prepare calculations for electrical loads and panel schedules.
- Code research to comply with building codes, NFPA, Energy Codes, etc.
- Demonstrates knowledge of lighting, photometrics, and lighting controls.
- Understands and applies concepts of voltage drop, conductor sizing, etc.
- Edit electrical specifications to reflect project requirements with input from Engineers.
- Layout fire alarm devices on floor plans.
- Exposure to equipment room sizing and layouts during the SD phase.
- Ability to direct an EL1 or Interns on a limited basis.
- Select and schedule equipment with limited oversight by Engineers.
- Meet with vendors to get exposure to specification requirements for different applications.
- Participates in field verification and take-offs of existing systems for renovation projects.
- Initiates coordination of space and utility requirements with other disciplines (PL, MX, Arch, Struct, etc.).
- Maintain the discipline Engineering Calcs and equipment selections for the project.
- Exposure and general awareness of risk management procedures to minimize EXP and client’s exposure.
- 4-8 years of experience in Electrical Design in Saudi Arabia
- Holder of a degree in Electrical Engineering from a reputable institution
- Active member of the Saudi Council of Engineers
- Proficient in CAD software, REVIT preferred
- Professionalism: Appropriate written and verbal communications skills.
- Professional presentation external and internal to office (attire, engagement, meeting prep, etc.).
- Demonstrates presentation skills through internal and external technical presentations and white papers.
- Leads participation in voluntary training opportunities such as vendor lunch and learns.
- Positively contributes to EXP and local office culture.
- Associate
- Full-time
- Design and Engineering
- Civil Engineering, Engineering Services, and Business Consulting and Services
Note: This description reflects the responsibilities, qualifications, and expectations for the Electrical Design Engineer role in Riyadh, Saudi Arabia. It does not include unrelated job postings or extraneous information.
#J-18808-LjbffrElectrical Design Engineer
Posted 24 days ago
Job Viewed
Job Description
Medical Services Directorate, Saudi Arabia
This position requires a highly experienced Electrical Engineer with a Bachelor of Science degree in Electrical Engineering from an accredited engineering school. The incumbent shall have a minimum of 8 years of experience in design of electrical engineering works, of which 3 years shall have been in a project engineer or supervisory capacity. The experience shall have included involvement with and/or directly responsible for the design of significant projects covering a broad spectrum of electrical projects. Familiarity with U.S., European and Saudi Arabian Standards and Codes is required for this position.
Job SpecificationThe incumbent shall serve as Electrical Engineer under the direct supervision of the Head of Branch. In this capacity, shall work on a wide variety of electrical design and technical review of projects. As Electrical Engineer, the incumbent shall be responsible for the technical review and design of electrical engineering projects from schematic development through to concept and final design. This will include preparation of presentation documentation graphics and database for basic and alternative designs, as required.
- The incumbent shall be thoroughly familiar with latest trends in materials, equipment, systems and methods of construction, installation and operation in the field of electrical engineering.
- Electrical engineering design and technical review responsibilities shall include, but not limited to; substation and transmission, both overhead and underground up to 35 KV prime and standby power generation; lighting, both interior and exterior; building services, fire protection, communications, building automation and security system, cathodic protection, protective relaying and controls, lightning protection and grounding.
- Perform other duties as assigned.
Be The First To Know
About the latest Electrical engineer Jobs in Saudi Arabia !
Electrical Design Engineer
Posted today
Job Viewed
Job Description
We are looking for an Electrical Design Engineer to develop, improve, and support electrical systems for industrial applications. You will be responsible for designing distribution systems, preparing drawings, selecting materials, and supporting manufacturing and installation processes, while ensuring compliance with engineering standards and safety codes.
Responsibilities:
- Design and layout electrical distribution systems for industrial plants
- Prepare load schedules, single-line diagrams, and technical specifications
- Create system models, perform simulations, and propose design improvements
- Support material selection, vendor coordination, and technical decision-making
- Generate detailed design documentation, reports, and test requirements
- Assist in the manufacturing and installation of new electrical systems
- Forecast electrical system costs and project budgets
- Conduct field inspections, surveys, and ensure quality compliance
- Review designs for code compliance and good engineering practices
- Coordinate and lead electrical design activities across project phases
- Analyze and resolve design and operational issues as they arise
Requirements:
Education: Bachelor’s degree in electrical engineeringor anyrelated field
Experience: +5 years of experience
Languages : Professional in English
- Strong knowledge of rotating and static electrical machines
- Hands-on maintenance experience with industrial electrical equipment
- Proficiency in creating and verifying engineering drawings
- Familiarity with industry codes, standards, and best practices
Skills:
- Electrical system design and load calculation expertise
- Electrical distribution design for industrial environments
- Strong drawing preparation and verification skills (AutoCAD or similar)
- Knowledge of material selection and vendor coordination
- Experience with electrical system modeling and simulations
- Proficiency in interpreting and applying electrical codes and standards
- Excellent troubleshooting, problem-solving, and decision-making abilities
- Strong documentation and technical reporting skills
- Team coordination and leadership in multi-discipline projects
- Effective communication with vendors, engineers, and construction teams
Electrical Design Engineer
Posted today
Job Viewed
Job Description
SDEC is one of the leading equipment distributors and custom industrial equipment solution provider. SDEC has a dynamic portfolio of products which is determined by the needs of our customers. SDEC culture is characterized by high customer orientation with a long-term view of relationships. We are inviting applications from candidates who have experience working as Electrical Design Engineer in heavy engineering industries for the genset manufacturing division.
Duties & Responsibilities
- Prepare conceptual design and finalize it with the Lead Electrical Design Engineer / Engineering Manager
- Do design calculations as necessary and cost estimates & preliminary designs when requested
- Analysis, testing, troubleshooting, and documenting of internal or supplier electrical systems and/or sub-systems of all projects and tasks of small to medium scope.
- Development of modelling simulation and analysis. Produces the design requirements and designs for electrical systems and/or sub-systems with all projects and tasks of small to medium scope.
- Works on problems of diverse scope where analysis of data requires evaluation of identifiable factors. Demonstrates good judgment in selecting methods and techniques for obtaining solutions.
- Prepare electrical part of the BOM's when asked by the Lead Electrical Design Engineer / Engineering Manager
- Create new component part numbers and prepare purchasing specs
- Coordinate with mechanical design engineers to accomplish the tasks
- To understand and comply with the procedures associated with ISO 9001
- Conducts basic engineering studies requiring little evaluation or ingenuity
- Provide technical support as & when required
Qualification/Training Courses
: Bachelor's degree in electrical engineering
Knowledge/Skills/Experience:
- Good communication skills in English/Arabic.
- Working knowledge of quality systems and standards
- Minimum 3 years of experience as Electrical Engineer out of which 2 years of experience in designing & development solutions for the power generations industry.
Electrical Design Engineer
Posted today
Job Viewed
Job Description
Position Objectives:
The Electromechanical Design Engineer's main role will be to produce design calculations accompanied by drawings and layouts. The engineer shall ensure full compliance with followed codes in Telecom Infrastructure and that all produced designs are in-line with the client's specifications, standards, and methods.
Job Description & Responsibilities:
- Oversee and manage electrical and mechanical design content and coordinate with other team members to produce the final product/document.
- Translate telecom service orders into EM engineering requirements.
- Prepare electrical (AC & DC) and mechanical (HVAC) design calculations and give a final recommendation on the do-ability of the scope.
- Prepare design drawings on Auto-CAD.
- Prepare site-specific design whenever required (equipment room, etc.).
- Lead necessary coordination with all stakeholders, resolving different issues that may result in delays or setbacks in project progress.
- Assist other team members whenever requested by the line manager, with overall department targets as the goal to achieve.
- Review and approve electrical and mechanical design documents, whether site-specific, new site, or even generic.
- Troubleshoot electromechanical design issues and implement corrective actions to prevent construction delays.
- Identify and mitigate risks, preventing design errors, material failures, and compliance breaches.
- Produce final design attributes, including but not limited to total load in Watts, CAPEX, etc.
Qualifications & Experience:
- BSc in Electrical Engineering or Equivalent.
- 5 to 10 years of experience with a solid understanding of Telecommunications Industry standards, including IEEE.
- Proven knowledge in DC Power Designs and Specifications
- Strong written and verbal communication skills.
- Effective coordination abilities.
- Highly organised and able to manage multiple tasks under pressure.
- Proficient in using Auto-CAD.
- Proficient in using Excel & other MS applications.
- The English Language is mandatory to know, both speaking and writing.
- An MBA would be a plus.