64 Drilling Engineer jobs in Saudi Arabia

We are seeking a Drilling Engineer to join our Unconventional Resources Drilling Department (URDD).

Performs and directs drilling engineering functions to support complex drilling operations; and leads major drilling engineering projects that require original or unusual analysis and solution.

The drilling engineer develops cost analysis, drilling and workover programs, completion reports; and performs engineering optimization studies based on offset data and drilling performance increasing efficiency. Develops casing and completion design and assists in testing new mud materials and treatments and new cementing practices and techniques. Prepares standard development practices and procedures to ensure maximum drilling efficiency consistent with safety, economics, reservoir and aquifer preservation considerations. Serves as consultant to Management and operating divisions on drilling and completion equipment design, purchase and operating problems and practices. Establishes design criteria of major oil field equipment to meet operating requirements consistent with sound economic and safety considerations. Serves as Project Engineer on all activities involved in operation and construction of new or existing well.

Some of the most critical Drilling Engineer duties are as follows:

A) Provides sound drilling engineering methods and procedures to be used on assigned drilling problems.

B) Executes and accomplishes assignments and studies in areas outlined in the scope assuring conformance to overall objectives of all phases of drilling operations in areas including drilling penetration rate optimization, new drilling technology and drilling studies.

C) Capable of providing technical support for many types of drilling wells including complex multi-lateral and extended reach (ERD) horizontal oil and gas wells, HPHT gas wells, offshore and deep water and unconventional wells. Wells include power water injection and producing wells, exploration wells and all kinds of workovers including HST's.

D) Proficient in analyzing advanced drilling data and the performance of new or existing drilling techniques to determine a need for or benefit from studies, recommendations and/or modifications with respect to unit costs and operating efficiency consistent with established.

E) Performs and prepares various studies and reports on drilling subjects then provides recommendations, alternative proposals and preliminary design and program outlines with statistical cost data, economic analyses, back-up data and charts and presents, or assists in the presentation of study and proposals to Management, technical and operating groups.

F) Initiates detailed work outlines and performs final development of technical proposals and studies of proposed projects.

G) Discusses, coordinates and is able to resolve any problems in assigned areas with personnel throughout Aramco and with outside organizations to ensure that conclusions and recommendations of work conform to and are consistent with overall company objectives and requirements.

H) Assists in the training and indoctrination of new personnel, SA engineers and engineering aides.

I) Delivers sound technical assistance and advice to operating divisions on complex drilling operating problems.

**SMP OPPORUTNITY IN OIL& GAS COMPANY**

Job Summary

We are seeking an experienced
Drilling Engineer
to join our
Unconventional Resources Drilling Department (URDD)
. This role involves leading complex drilling engineering activities, supporting operational teams in delivering high-performance wells, and overseeing engineering projects from design through execution. The ideal candidate brings deep technical expertise in unconventional resource development, cost optimization, and drilling efficiency within a safe and environmentally responsible framework.

Key Responsibilities

• Develop comprehensive drilling and workover programs for various well types, including horizontal, extended reach (ERD), multi-lateral, HPHT, deepwater, and unconventional wells.
• Conduct engineering optimization studies to improve drilling performance and reduce operational costs.
• Design casing and completion systems; assist in evaluating new mud systems, cementing technologies, and well construction practices.
• Prepare detailed cost analyses, performance reports, and completion summaries for management and operations teams.
• Establish and implement standard drilling procedures and development practices that align with safety, economic, and environmental goals.
• Provide technical consultation on equipment design, procurement, and operational challenges.
• Serve as Project Engineer on drilling and well construction projects, coordinating engineering input and execution planning.
• Analyze drilling data to identify performance trends and recommend design or process enhancements.
• Participate in training and mentorship programs for junior engineers and technical staff.
• Collaborate with internal teams and external partners to resolve technical challenges and ensure alignment with company objectives.

Core Competencies & Technical Skills

• Extensive experience in unconventional drilling environments.
• Strong knowledge of advanced drilling technologies, tools, and equipment.
• Proven ability to plan and execute complex well designs (e.g., ERD, HPHT, multi-lateral).
• Proficient in engineering software used for well planning, modeling, and economic evaluation.
• Skilled in analyzing drilling performance data and implementing optimization strategies.
• Effective communicator and team leader with problem-solving capabilities.

Minimum Qualifications

• Education:
  Bachelor's Degree in Engineering (preferably Petroleum, Mechanical, or Chemical Engineering).
• Experience:
  Minimum of
  10 years
  of drilling engineering experience, with clear recognition as a
  Senior Drilling Engineer
  .
• Demonstrated leadership in technically demanding drilling projects.

Other Requirements

• Willingness to occasionally work in remote areas and stay in mobile field camps as required by operational needs.
• Strong interpersonal and organizational skills.
• High degree of initiative and accountability in managing technical challenges.

Join our growing team

We are the leader in well construction and production. Our innovative physical and digital solutions improve efficiency, production and maximize reservoir value. Our Pressure Pumping team are expertise in Cementing, Coiled Tubing & Stimulation.

Partner with the best

As a wellsite Drilling Engineer, you will be the focal point for all onsite drilling engineering, well flow, daily reports, operations and liaison for Service Providers on site. The WSDE works under direction from the onsite Aramco Forman and BH Well Site Team Leader (WSTL) and the Office BH Technical Advisor.

As aWellsite Drilling Engineer you will be responsible for:

• Review current Drilling Program prior to commencement of operation and ensure all clarifications, errors and corrections have been addressed.
• Must have good working knowledge of all SOP's both operating and contingency.
• Supervise execution of all SOP's in a safe and efficient manner
• Promote safe work practice by; leading TBT, safety leadership, safety coaching and JSA's.
• Recommends update to all SOP's relative to learning's using the MOC system.
• Review BHA sheets prior to assembly and monitor assembly of same.
• Ensure, drill fluid, kill fluid, Hi-Vis products and friction reducer are prepared correctly and properties maintained as per Aramco Foreman and WSTL.
• Monitor on site fresh water and kill fluid volumes are maintained as per program .
• During N2 operations, closely monitor N2 pump rates to ensure it is pumped in a safe manner, rates are maintained as per program me and onsite inventory is reported to the Aramco Forman and WSTL.
• Maintain UB condition by adjusting liquid pump rate, N2 rate (if in use) and/or choke settings as per Aramco Foreman, WSTL and DD.
• Stay in close communication with the BH office Technical advisor.
• Use WellFlo multi-phase flow software to calculate and ensure liquid velocities, gas velocities and mix liquid / gas velocities are sufficient for hole cleaning. Advise any questionable values to; Aramco Foreman, WSTL, DD, UB Supervisor and Driller.
• Use WellFlo to calculate lag times for changes in; depth, circulating rates and production rates, changes in lag times to be reported to the Aramco Forman, WSTL, UB Supervisor, Choke Operator and Driller
• Ensure Geological samples are captured as per procedure and frequency as per standing Aramco Forman's instructions and/or as per Bio-steering and Geologist requirements.
• Ensure regular compositional analysis of fluid returns is conducted using centrifuge grind outs and results are documented accordingly.
• On H2S wells above 100 ppm monitor fluid returns to the ground pit for dissolved sulphides, treat out dissolved sulphides with caustic soda and liquid H2S scavenger as per; Mud-man, Aramco Foreman and WSTL.
• Ensure Vis pill sweep frequency and wiper trip length / sequence / schedule is adjusted as per hole conditions in conjunction with instructions of the Aramco Foreman and WSTL and / or under advice of DD and Driller.
• Ensure flared gas is minimized and export gas is maximized.

Fuel your passion

To be successful in this role you will:

• Have minimum 3 to 8-years' experience in UBD

• Have a bachelor' degree in an Engineering discipline from an accredited college or university

• Have comprehensive knowledge of well control best practices and procedures

• Have understanding of Coiled Tubing and underbalanced Drilling System

Work in a way that works for you

We recognise that everyone is different and that the way in which people want to work and deliver at their best is different for everyone.

• This role is working with our customer on-site in locations across the world. When onsite, you will have the flexibility to work in line with customer working patterns. When projects are complete, we offer you the opportunity to take extended leave before you take on your next project

Working with us

Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other.

Working for you

Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect:

• Contemporary work-life balance policies and wellbeing activities
• Comprehensive private medical care options
• Safety net of life insurance and disability programs
• Tailored financial programs
• Additional elected or voluntary benefits

About Us

With operations in over 120 countries, we provide better solutions for our customers and richer opportunities for our people. As a leading partner to the energy industry, we're committed to achieving net-zero carbon emissions by 2050 and we're always looking for the right people to help us get there. People who are as passionate as we are about making energy safer, cleaner and more efficient.

Join Us

Are you seeking an opportunity to make a real difference in a company with a global reach and exciting services and clients? Come join us and grow with a team of people who will energize and inspire you

About Us:

We are an energy technology company that provides solutions to energy and industrial customers worldwide. Built on a century of experience and conducting business in over 120 countries, our innovative technologies and services are taking energy forward – making it safer, cleaner and more efficient for people and the planet.

Join Us:

Are you seeking an opportunity to make a real difference in a company that values innovation and progress? Join us and become part of a team of people who will challenge and inspire you Let's come together and take energy forward.

Baker Hughes Company is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Do you enjoy being part of a successful team?
Do you enjoy working with cutting-edge energy equipment?
Join our growing team
We are the leader in well construction and production. Our innovative physical and digital solutions improve efficiency, production and maximize reservoir value. Our Pressure Pumping team are expertise in Cementing, Coiled Tubing & Stimulation.

Partner with the best
As a wellsite Drilling Engineer, you will be the focal point for all onsite drilling engineering, well flow, daily reports, operations and liaison for Service Providers on site. The WSDE works under direction from the onsite Aramco Forman and BH Well Site Team Leader (WSTL) and the Office BH Technical Advisor.

As a Wellsite Drilling Engineer you will be responsible for:

• Review current Drilling Program prior to commencement of operation and ensure all clarifications, errors and corrections have been addressed.
• Must have good working knowledge of all SOP's both operating and contingency.
• Supervise execution of all SOP's in a safe and efficient manner
• Promote safe work practice by; leading TBT, safety leadership, safety coaching and JSA's.
• Recommends update to all SOP's relative to learning's using the MOC system.
• Review BHA sheets prior to assembly and monitor assembly of same.
• Ensure, drill fluid, kill fluid, Hi-Vis products and friction reducer are prepared correctly and properties maintained as per Aramco Foreman and WSTL.
• Monitor on site fresh water and kill fluid volumes are maintained as per program .
• During N2 operations, closely monitor N2 pump rates to ensure it is pumped in a safe manner, rates are maintained as per program me and onsite inventory is reported to the Aramco Forman and WSTL.
• Maintain UB condition by adjusting liquid pump rate, N2 rate (if in use) and/or choke settings as per Aramco Foreman, WSTL and DD.
• Stay in close communication with the BH office Technical advisor.
• Use WellFlo multi-phase flow software to calculate and ensure liquid velocities, gas velocities and mix liquid / gas velocities are sufficient for hole cleaning. Advise any questionable values to; Aramco Foreman, WSTL, DD, UB Supervisor and Driller.
• Use WellFlo to calculate lag times for changes in; depth, circulating rates and production rates, changes in lag times to be reported to the Aramco Forman, WSTL, UB Supervisor, Choke Operator and Driller
• Ensure Geological samples are captured as per procedure and frequency as per standing Aramco Forman's instructions and/or as per Bio-steering and Geologist requirements.
• Ensure regular compositional analysis of fluid returns is conducted using centrifuge grind outs and results are documented accordingly.
• On H2S wells above 100 ppm monitor fluid returns to the ground pit for dissolved sulphides, treat out dissolved sulphides with caustic soda and liquid H2S scavenger as per; Mud-man, Aramco Foreman and WSTL.
• Ensure Vis pill sweep frequency and wiper trip length / sequence / schedule is adjusted as per hole conditions in conjunction with instructions of the Aramco Foreman and WSTL and / or under advice of DD and Driller.
• Ensure flared gas is minimized and export gas is maximized.

Fuel your passion
To be successful in this role you will:

• Have minimum 3 to 8-years' experience in UBD
• Have a bachelor' degree in an Engineering discipline from an accredited college or university
• Have comprehensive knowledge of well control best practices and procedures
• Have understanding of Coiled Tubing and underbalanced Drilling System

Work in a way that works for you

We recognise that everyone is different and that the way in which people want to work and deliver at their best is different for everyone.

• This role is working with our customer on-site in locations across the world. When onsite, you will have the flexibility to work in line with customer working patterns. When projects are complete, we offer you the opportunity to take extended leave before you take on your next project

Working with us
Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other.

Working for you

Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect:

• Contemporary work-life balance policies and wellbeing activities
• Comprehensive private medical care options
• Safety net of life insurance and disability programs
• Tailored financial programs
• Additional elected or voluntary benefits

About Us
With operations in over 120 countries, we provide better solutions for our customers and richer opportunities for our people. As a leading partner to the energy industry, we're committed to achieving net-zero carbon emissions by 2050 and we're always looking for the right people to help us get there. People who are as passionate as we are about making energy safer, cleaner and more efficient.

Join Us
Are you seeking an opportunity to make a real difference in a company with a global reach and exciting services and clients? Come join us and grow with a team of people who will energize and inspire you

About Us:
We are an energy technology company that provides solutions to energy and industrial customers worldwide. Built on a century of experience and conducting business in over 120 countries, our innovative technologies and services are taking energy forward – making it safer, cleaner and more efficient for people and the planet.

Join Us:
Are you seeking an opportunity to make a real difference in a company that values innovation and progress? Join us and become part of a team of people who will challenge and inspire you Let's come together and take energy forward.

Baker Hughes Company is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

R

Job Title Associate Drilling Engineer

Minimum Job requirements Bachelor's Degree in Petroleum Engineering, or Mechanical Engineering

Preferred major study in the bachelor degree Mechanical Engineering or Petroleum Engineering

Specify work experience Minimum 2 years

Fresh graduate or experience Experience if not available we are fine with fresh graduates

Work Location Dhahran

Work Schedule N11

Description and Requirements

Lenovo is proud to have announced last year a strategic collaboration with Alat, a subsidiary of the Public Investment Fund (PIF). This partnership includes a significant agreement for US$2 billion in zero coupon convertible bonds, representing a major milestone in our commitment to growth and innovation.

The strategic collaboration was formally established by the CEOs of both companies, who inaugurated during LEAP 2025 the land designated for the construction of a new state-of-the-art sustainable factory in Riyadh (SILZ).

Our vision is to become the leading technology partner supporting Saudi Vision 2030 with the mission in mind to position Lenovo as the leading global technology powerhouse in KSA, spearheading major ICT projects linked to the execution of Saudi Vision 2030.

This new facility & operation underscore our dedication to sustainability and economic development. We are seeking talent to join us in this groundbreaking venture and this exciting journey in the Kingdom.

In this role, you will be “the brain behind the operation”. You will employ your interpersonal skills with CTOs, IT decision makers, Lenovo pre-sales and sales teams, end customers, partners, and ISVs to bring value to our customers. Your objectives will be in the development of infrastructure solutions opportunities through the sales cycle, from understanding customer business and technical requirements, building the solution architecture, and bringing the opportunity up to a close by demonstrating customer value.

• Trusted Advisor Role: Define and identify IT Data Centre and Storage projects, acting as a trusted advisor to customers and the Lenovo seller team.
• Pipeline Development: Help develop pipelines for new Server, Software Defined Infrastructure, and Storage business within assigned Oil & Gas.
• Customer Relationships: Grow and maintain relationships with technical communities within customers and partners, up to CTO level.
• Technology Updates: Keep customers informed about relevant new technologies and innovations.
• Solution Configurations: Produce configurations across multiple solutions, collaborating with product and technical communities, sales teams, and business partners to support and win business.
• Account Team Support: Proactively support account teams with product advice, presentations, and proposals.
• Cross-team collaboration: Working with data centre partners, prepare RFI and RFP responses, present solutions, conduct proofs of concept, and create and deliver training to the partner community
• Market Presence: Increase Lenovo market presence through social media platforms, events, workshops, blogs, whitepapers, and videos.

• 5+ years of experience in a technical sales position in information technologies field
• Technical Pre-Sales Experience from an Enterprise Server/IT Vendor, Distributor, or Partner environment with previous technical pre-sales positions.
• Customer Infrastructure Understanding: Gather information to accurately understand customer technology infrastructure and propose complex Lenovo solution
• Data Centre Solutions Delivery: Experience working directly with end-user customers in delivering infrastructure solutions.
• Technical Expertise: Thorough understanding of architecture, design, and implementation of modern IT systems and cloud infrastructures, including storage solutions and their interactions with converged, hyperconverged solutions, and operating systems.
• Ability to produce configurations across solutions for Oil & Gas, collaborating with product specialists, technical communities, sales teams, and business partners to support and win business.

We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, religion, sexual orientation, gender identity, national origin, status as a veteran, and basis of disability or any federal, state, or local protected class.

Saudi Arabia

AI PROCESSING NOTICE

We use AI-based tools to support some of our processes (e.g. online interviews recordings and transcripts) in order to achieve better efficiency, accuracy and for our documentation purposes. AI can make mistakes, but we always make sure that the outputs are manually reviewed by a human. You can always opt-out or contact us in case of any question.

If you require an accommodation to complete this application, please

Job Overview

Arthur Lawrence is urgently looking for a SAP OIL&GAS Consultant for a client in Riyadh, KSA. The successful candidate will have the following qualifications:

Must Have:

• 8+ years of hands-on experience as an SAP Consultant in the Oil & Gas industry.
• In-depth knowledge of SAP modules relevant to Oil & Gas processes (e.g., SAP IS-Oil, SAP PRA).
• Proven experience in full lifecycle SAP implementation projects.
• Strong analytical and problem-solving skills.
• Effective communication and collaboration abilities.

Nice to Have:

• SAP certification in relevant modules.
• Experience with SAP S/4HANA for Oil & Gas.
• Familiarity with industry-specific regulations and compliance requirements.

Arthur Lawrence is a management and technology consulting firm providing enterprise-wide business transformation and business applications implementation services.

We are an equal opportunities employer and are committed to diversity and inclusion.

To perform insulation works on piping, equipment, and structures in accordance with project specifications, safety standards, and supervisor instructions, ensuring proper thermal, acoustic, and protective insulation installation.

• Measure, cut, and install insulation materials on pipes, ducts, tanks, and equipment.
• Perform both hot and cold insulation, including aluminum cladding/jacketing.
• Ensure insulation work is carried out as per drawings, specifications, and supervisor guidance.
• Safely handle insulation materials such as rock wool, glass wool, foam glass, and calcium silicate.
• Conduct finishing work including sealing, banding, and weatherproofing of insulation.
• Maintain housekeeping and follow strict HSE rules at site.
• Report defects, damage, or safety concerns to supervisors.

• Assist in scaffolding and safe access arrangements where required.

• Minimum 2–4 years' experience as an Insulator in Oil & Gas / Petrochemical projects.

• Knowledge of various insulation techniques (hot, cold, cryogenic, cladding).
• Ability to use insulation tools (measuring tape, cutters, banding tools).
• Able to read and follow basic insulation drawings/sketches.
• Physically fit to work in outdoor plant/industrial conditions.
• Basic English communication (Arabic is a plus).

Overview

Hiring for Digital Consultant for Oil & Gas

Saudi Arabia

15 to 25 years

• Led and delivered large transformation delivery programs for key oil and gas projects
• Built and owned a Domain Practice (market development, offerings, and team development)
• Practice Management / Delivery Management (Portfolio & Operations) in Oil & Gas (Upstream) – Domain
• Adopted new technologies (Digital - Cloud, Agile/DevOps) and led related teams
• Led teams focused on Microsoft technologies (C#/.Net, C++), and Azure DevOps

• Experience with large-scale transformation programs in the oil & gas sector
• Strong domain ownership and leadership in domain practice development
• Delivery management, portfolio operations, and cross-functional team leadership
• Proficiency with digital technologies, cloud, Agile/DevOps, and Microsoft tech stack

Email: