92 Welding Technician jobs in Saudi Arabia

Rassas is a limited liability company based in Riyadh and wholly owned by Tasnee. It specializes in non-radioactive metals, making it ideal for protection against nuclear radioactivity.

An exciting opportunity is available for Technician III, Welding , based in Riyadh .

The candidate must be knowledgeable in steel fabrication, measuring structures, and BOM for structural work.

• Read sketches and blueprints to calculate materials required (BOM).
• Cutting and welding of different kinds of steel (MS and SS).
• Structural installation works.
• Selection of steel grades for fabrication works.

• Diploma or welding certification.
• At least 5 years of experience in fabrication works.

• Type: Full Time

• Chemicals
• Polymers

• Maintenance
• Operations

Note: is a platform connecting jobseekers and employers. Applicants should verify the legitimacy of employers independently. We do NOT endorse requests for money payments and advise caution when sharing personal or bank information. For security advice, visit our website. If you suspect fraud, email .

About Tasnee:

Established in 1985, Tasnee is Saudi Arabia's first fully owned private joint-stock industrial company, aiming to diversify the economy. Today, it is among the largest industrial firms in Saudi Arabia and a major investor in titanium dioxide, committed to innovation through its global R&D centers. Website:

To execute quality control processes, inspection, and documentation in order to meet project specifications and customer expectations, while ensuring compliance with regulatory standards and company policies.

Job Responsibilities:

1) Daily Operations:

• Implement the day-to-day operations assigned to the Quality Control Department to ensure compliance with the established standards and procedures.
• Identify opportunities for continuous improvement of systems, processes and practices considering ‘international best practice’, improvement of business processes, cost reduction and productivity improvement.
• Review reports of the Quality Control Department timely and accurately to meet company and department requirements, policies, and standards.

2) Specific Job Accountabilities:

• Develop and implement a strategic monthly inspection schedule that optimizes inspector assignments ensuring thorough quality assessments, efficient resource utilization, and alignment with project timelines and quality objectives.
• Review all project quality control documentation, including procedures, inspections, test plans, checklists, forms, etc. ensuring that they meet the project’s specifications.
• Proactively address and resolve quality control issues by implementing an effective escalation process to ensure rapid engagement and resolution by senior management.
• Ensure compliance with local and international quality control requirements as well as company policies and procedures.
• Review, sign, and submit QA/QC prepared by inspectors to clients, in a timely and accurate manner.
• Review the Non-Conformity Report (NCR) submitted by the client and conduct root cause analysis, formulate preventive/corrective actions in coordination with QA Team.
• Participate in periodically audits by preparing the required QC documentation and evidence of compliance.
• Monitor and analyse quality control processes to identify opportunities for improvement and implement changes to increase efficiency and quality.

3) Direction of Subordinates:

• Organize and supervise the activities and work of inspectors to ensure that all work is carried out in an efficient and procedurally compliant manner.
• Evaluate team performance, provide formal and informal feedback, identify training needs, and implement development programs to enhance skills and knowledge.
• Provide instructions to subordinates and monitor their adherence to relevant policies and procedures so that work is carried out in a controlled manner.

5) Safety, Quality & Environment:

• Comply with all relevant safety, quality and environmental management policies, procedures and controls to ensure a healthy and safe work environment.

Qualifications:

• Bachelor’s degree in industrial or mechanical or any related filed in engineering.
• 7+ years relevant experience in quality control in the construction industry.
• Certificate in ISO 9001 & ISO 45001 is required.
• Leadership, communication, and documentation development skills are required.
• Familiar with construction codes (AWS, EN, AISC, ASME & Aramco)
• Certificates such as Certified Welding Inspector and Certified Coating Inspector are mandatory.

• Seniority level Mid-Senior level

• Employment type Full-time

• Job function Administrative, Engineering, and Other
• Industries Manufacturing, Civil Engineering, and Engineering Services

Referrals increase your chances of interviewing at International Building Systems Factory Co. LTD. by 2x

We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.

Job Purpose

Quality Inspector responsibilities include checking all inbound deliveries before receipt. The role ensures quality inspection of all received products to confirm they meet Panda Specifications (where available) and to prevent sub-standard products from entering Panda Food Chain. The inspector must ensure compliance with local (SASO/ SFDA) and international quality and food safety standards.

1. QC - Produce / Deli
2. Schedule and prepare for receiving fresh deliveries daily.
3. Follow the DC receiving SOP and sampling plan for product receiving and inspection in coordination with the TL.
4. Check temperatures of vendor vehicles and products before offloading and dispatching deliveries to stores.
5. Inspect products and recommend to the TL and Assistant QC Manager whether to receive or reject deliveries based on product specifications.
6. Document all non-conformities with photos and report them to the TL.
7. Accurately complete all receiving logs and inspection checklists on time.
8. Ensure proper storage practices according to product categories and storage conditions.
9. Ensure conformance to Panda Receiving Processes.
10. Check Brix and firmness for fruits based on specifications.
11. Monitor the pest control system in the DC to prevent pest infections.

• Diploma required; college level preferred.
• Familiarity with QA regulations set by the Corporate QA Team.
• Proficiency in English; knowledge of Arabic is an advantage.
• Ability to work independently and be self-motivated.
• Strong leadership and decision-making skills.
• Ability to recommend improvements to standards and processes.
• Ability to justify rejection of deliveries with technical explanations.
• Proficient in computer skills, including email, reporting, digital photography, and use of industrial thermometers.
• Previous experience in related fields, especially in fresh produce, grocery foods, is mandatory.

Manpower is seeking to recruit a Quality Control Specialist to join our client's team.

Overview

The position entails a rigorous quality assurance process, where the incumbent will report directly to Senior Management. The primary focus is to maintain the highest standards of product integrity by conducting thorough inspections and analyses at various production stages. Additionally, the role requires proactive site management, ensuring ongoing operational excellence and adherence to compliance protocols through regular site evaluations, addressing non-conformities, and maintaining systematic process.

Key Accountabilities

Production process

• Conduct comprehensive testing of products to ensure adherence to quality standards and legal requirements, documenting all quality tests, procedures, and standards.
• Monitor product development and manufacturing processes to detect deviations from desired quality benchmarks.
• Propose modifications in manufacturing processes, methods, or materials to enhance product quality and increase production yield.
• Raw Material and Finished Good
• Perform thorough reviews of records and data from incoming materials and production processes to verify compliance with specifications.
• Approve products that meet quality specifications and reject those that are defective.

Risk Evaluation

• Spearhead the development of material risk assessments and process improvement initiatives, aiming to elevate quality control standards for subsequent production cycles.
• Implement and maintain regular audits to ensure compliance with food safety regulations.
• People Management
• Develop comprehensive training programs for personnel on quality procedures and food safety standards. Lead by example to instil a culture of safety and quality in all work operations.
• Provide continuous training and updates on the latest industry standards and best practices.
• Foster a collaborative environment where employees are encouraged to voice concerns and suggestions regarding food safety and quality.

Ideal Candidate Profile

Education

• Bachelors degree in food science/food technology, Engineering, or related field (Microbiology, Chemistry, Food Biotechnology).

Experience

• Minimum of 6 years of quality assurance/quality control experience within food manufacturing operations, of which 2 + years in leadership role.

Technical Skills

• Performance Management
• Regulatory
• Training & Development
• Supervisory Skills
• Knowledge of and experience with ISO 9001, GFSI Quality Systems
• Business Process Re-engineering
• Root Cause Analysis (e.g., FMEA, SWOT, Ishikawa, Fish Bone)
• Technical / Food Processing automation/ Validations
• Statistical Data evaluation
• Auditing (internal, external)
• ERP system knowledge
• Physical / chemical Analysis & IPC control
• Competencies
• Motivation /Modelling (Leading by Example)
• Developing People
• Monitoring & Measuring
• Programme and Project Management*
• Influencing and Impact, including Conflict Management
• Assertiveness
• Strategic Thinking & Change Management
• Relationship Building
• Customer Service Orientation
• Judgement & Decision Making
• Presentation and Facilitation
• Analytical Thinking & Problem Solving
• Attention to Detail
• Drive for Results
• Quality & Rule Orientation
• Teamwork

Job Purpose

The Quality Inspector is responsible for inspecting all inbound deliveries before acceptance.

The role involves ensuring that all received products meet Panda Specifications (where available) and that no sub-standard products enter the Panda Food Chain.

Compliance with local (SASO, SFDA) and international quality and food safety standards is essential.

Functional Responsibilities:

QC - Produce / Deli

• Scheduling and preparing for receiving fresh deliveries daily.
• Following the DC receiving SOP and applying sampling plans during product reception in coordination with the TL.
• Checking the temperature of vendor vehicles and products before offloading and prior to dispatch to stores.
• Inspecting products and making recommendations to the TL and Assistant QC Manager to receive or reject deliveries based on set specifications.
• Documenting all non-conformities with photographs and reporting them to the TL.
• Accurately completing all required documentation, including receiving logs and inspection checklists.
• Ensuring proper storage practices according to product categories and conditions.
• Adhering to Panda Receiving Processes.
• Checking Brix and firmness for relevant fruits based on specifications.
• Monitoring the pest control system in the DC to prevent pest infestations.

About NeproPlast :

NeproPlast is a fast-growing plastic manufacturing company based in Jeddah, dedicated to producing high-quality products for various industries. We are currently looking for a motivated and detail-oriented Entry-Level QC Inspector to join our dynamic team and support our commitment to quality and excellence.

Job General Objectives: Control of production quality during his period (shift).

Job Responsibilities :

• Conduct routine inspection and tests according to SOP and QC inspection and test plan.
• Prepares quality inspection reports.
• Ensures fast and accurate feedback of test results to production department.
• Maintain good working condition of test equipment, tools and measuring instruments.
• Ensure that the calibration of measuring and test equipment he is using is up to date.
• Maintain housekeeping and cleanliness of his working area.
• Perform similar or related works as instructed by his immediate superior.
• Carry out similar or related works as directed by his direct superior.
• Assist in inspecting raw materials, in-process products, and finished goods to ensure they meet quality standards.
• Conduct simple quality control tests and measurements using basic testing tools and equipment.
• Document inspection results and report any defects or issues to the senior QC team.
• Support the production team in ensuring the quality of products during the manufacturing process.
• Learn and apply quality control techniques and procedures under the guidance of experienced team members.
• Maintain a clean and organized work area and ensure compliance with health and safety regulations.
• Participate in basic training on quality standards, manufacturing processes, and safety protocols.

Required Skills, Personal Qualities and Training:

• Observance of cleanliness in his work.
• A calm and patient manner.
• Ability to communicate effectively at all levels.
• Ability to read, write and count.
• Ability to work as part of a team.
• Ability to work under pressure.
• Attendance Punctuality.
• Eliminating waste.
• First Aid, Fire Fighting, Emergency & Evacuation Skills.
• Good appearance and follow the company required uniform.
• Speed and accuracy in performing his work.
• He has the knowledge of the job tasks requirements.

Qualifications :

• High school diploma or equivalent; technical or vocational certification in manufacturing or quality control is a plus.
• Priority for selection will be for Saudi Nationals.
• No prior experience required, but an interest in quality control and manufacturing processes is preferred.
• Strong attention to detail and willingness to learn.
• Ability to follow instructions and work well as part of a team.
• Basic math and measurement skills.
• Good communication skills.
• Ability to adapt to a fast-paced work environment.

Preferred Skills :

• Basic understanding of quality control processes or manufacturing operations (training will be provided).
• Familiarity with common inspection tools and safety equipment is a plus.

Benefits :

• Competitive salary and benefits package.
• Full training and development opportunities to grow your career in quality control and manufacturing.
• Friendly and supportive work environment.

This Position exists to perfrom quality control activities efficiently, in timely manner and quality standards as per the defined policies and procedures to achieve departmental operational plans and developments.

· Plan & organize of in-process, final inspection and testing activities
· provide Speciality in programming & testing of PLC , Synchronization, ATS, soft starter panels etc. & supporting /guiding for team contribution
· Coordinate with projects and other departments for execution of project.
· Verify completed inspection and test reports for correctness
· Coordinate with third party agency & customer for factory inspection. Coordinate with other department & finalize the customer comments to release products as soon as possible
· Prepare project wise inspection & test reports
· Control of non-conforming products ( by raising punch list / NCR and follow up till completion)

HR Proficiency:
•Training of sub-ordinates and forming a team to get the work effectively achieved.
•Provide leadership, coaching, and direction to subordinates in all aspects of their work.
•Delegate sub-ordinates in each respective assignment.
•Ensures fair distribution of tasks to maintain morale, motivation of subordinates.
Delivery:
•Perform the planned activities to meet the operational and development targets as per delivery schedules.
•Utilize resources effectively to achieve objectives within efficient cost and time.
•Provide a periodic report formatted by detailing the deviation and execution of planned tasks.
Problem-Solving:
•Resolve any related problems arise and escalate any complex operational issues.
Quality:
•Ensure quality requirements to develop effective quality control and processes including specifications for products or processes or related activities.
Business Process Improvement (Effectiveness):
•Coordinate well-defined written systems, policies, procedures, and seeking automations opportunities as much as possible.
Compliance:
•Comply to related policy & procedures and work instructions.
Health & Safety:
•Ensure compliance of relevant safety, quality, and environmental management procedures and controls within defined area of work activity to guarantee safety, legislative compliance, and delivery of high-quality products/services.

Bachelor Degree in Electrical Engineering or Mechanical Engineering

Far much that one rank beheld bluebird after outside ignobly allegedly more when oh arrogantly vehement irresistibly fussy penguin insect additionally wow absolutely crud meretriciously.

Far much that one rank beheld bluebird after outside ignobly allegedly more when oh arrogantly vehement irresistibly fussy penguin insect additionally wow absolutely crud meretriciously.

Far much that one rank beheld bluebird after outside ignobly allegedly more when oh arrogantly vehement irresistibly fussy penguin insect additionally wow absolutely crud meretriciously.

Far much that one rank beheld bluebird after outside ignobly allegedly more when oh arrogantly vehement irresistibly fussy penguin insect additionally wow absolutely crud meretriciously.

Job Summary

The Quality Control Specialist will be responsible for ensuring all products and processes meet internal standards and external regulations. This includes the inspection and testing of steel components, wood materials, and electromechanical assemblies to verify compliance with engineering specifications and quality requirements.

Key Responsibilities

• Perform quality inspections on incoming raw materials (steel, wood, electrical/mechanical parts) and finished products.
• Monitor in-process production to ensure adherence to quality control plans and specifications.
• Conduct dimensional checks, visual inspections, and functional testing of mechanical and electromechanical components.
• Identify non-conformities and coordinate with production and engineering teams to resolve issues.
• Maintain accurate inspection records, test reports, and corrective action documentation.
• Assist in developing and updating QC procedures and checklists.
• Support audits (internal, customer, and third-party) and compliance activities.
• Collaborate with cross-functional teams to drive continuous improvement in product quality.

Skills

Requirements

• Bachelor's degree or diploma in Mechanical Engineering, Industrial Engineering, or a related technical field.
• 3+ years of experience in quality control in industrial manufacturing, preferably involving steel, wood, or electromechanical products
• Solid understanding of quality standards (e.g., ISO 9001).
• Proficiency in using inspection tools and measuring instruments (e.g., calipers, micrometers, multimeters).
• Familiarity with mechanical drawings and electrical schematics.
• Strong attention to detail and problem-solving skills.
• Ability to work independently and in a team-oriented environment.