680 Spark jobs in Saudi Arabia

Job Summary

This position created for handling incoming receiving inspection, in process inspection and final product inspection in Quality Assurance & Control function of Flow Controls, Jubail / Spark!

Responsibilities

• Sr. Quality Engineer :
• Read and understand Customer / Internal specifications and international standards
• Carry out receiving inspection as per Incoming Inspection plans
• Issue Corrective Action Request to Suppliers and follow up for close-out
• Review Material Test Certificates, NDE reports, valve & actuator certification pack etc.
• Carry out in-process inspection like heat no. verification, PMI, hardness, paint DFT etc.
• Carry out final Inspection and certification as per the PO & approved documents
• Carry out Special testing (Fugitive emission testing) of valves
• Perform Oracle transactions in Quality Module
• Coordination of Customer Inspection
• Arranging the Calibration of Instruments and maintaining the records.
• Maintaining / updating the ISO documentations & records
• Perform Supplier quality control activities, audits, qualification renewal, maintaining records and updating new suppliers in Worldwide Qualified Suppliers list.
• Issue rework form to the suppliers and coordinate / visit machine shops for the same
• Prepare and furnish supplier PPM data in global quality SharePoint and MEA
• Provide machining related clarification to the new trim part suppliers in India and local rework machine shops
• Preparation of Standard Operating Procedures, Quality Alerts, Safety instructions / initiatives
• Supervise the SCAR status in MEA quality share point, Review the effectiveness of CA provided by the suppliers and close the same. Co-ordinate with the respective world area SQE on delayed Scars.
• Prepare project specific Surface preparation & Painting procedures
• Train and qualify Painters in Jubail and maintain qualification records of the same
• Review project painting specifications for new projects & provide clarification on all painting related queries from PM and OE for Flow Controls
• Co-ordinating with shop on inspection and testing done in-house and report as required by the order (DFT, MEK, dolly pull off, x cut, salt contamination, dust test, holiday test , monitoring the Blotter test and Air pressure tests and verifying the records maintained.
• Visiting external paint / coating shops / local suppliers for audits and quality checks as required
• Offer paint DFT and PMI inspection for Client / TPI inspectors and issue reports and supporting documents for the same
• Participation in PIM (All orders Aramco Direct and EPC orders), KOM, Customer Project Specific visits
• Support QP & Spec function to review Customer specifications related QMS & Factory Tests
• Perform CSP reviews with Suppliers for sophisticated CSPs
• Review Customer comments on QMS & Factory test procedures and provide resolution to Project lead
• Scheduling & handling challenging project witness stage inspections
• Support all in pipe team for smooth execution of projects
• Verify finished equipment against IPO, using final inspection checklist
• Create Final certificate in QA Docs for MRO and Projects
• Review material certificates, NDE reports and test reports against PS codes, customer documentation & special requirements
• Review Factory test results against IPO
• Plan, Notify for Customer Inspection, offer completed products for customer inspection
• Raise non-conformance and follow up for corrective action and close out.
• Review Root Cause & Corrective actions to ensure effectiveness of actions
• Liaise with third party inspectors for witnessing of inspection and ensure inspection requirements from Customer are met.
• Part number validation in Oracle
• Take ownership of Company’s Quality Policy & Core Values

EHS

• Consider EHS risks in decision-making and model safety as a core value every day.
• Work in accordance with Emerson’s 12 Lifesaving Behaviors at all times.
• Report EHS concerns and / or unsafe conditions or unsafe behaviors immediately to a supervisor and raise further, as needed.
• Stop work when conditions pose the risk of harm to people, property, or the environment.
• Report all injuries immediately, regardless of the severity, to a supervisor.
• As vital, complete applicable safety training.
• Understand and implement safety-related responsibilities, as outlined in training, safety procedures, policies, and standards.
• Use only equipment / chemicals / processes for which they have been trained.
• Know the hazards of your job and follow your training to control associated risks.
• Actively participate in EHS continuous improvement activities (., safety & health audits, safety committees, focused improvement teams, process improvement projects, .
• Ensure effective leadership in HSE, leading by example and setting the direction for a successful health and safety program and creating a foundation for a positive safety culture.
• Discuss Health and Safety first in every meeting.
• Ensure effective management of HSE risks and impacts. Report all hazards, incidents and Near Misses in line with the MEA Emerson HSE incident policy. Active involvement in the investigation of accidents, near misses, incidents and ill health where required.
• Attend all HSE training assigned to you as an employee
• 100% utilization of the Emerson Velocity EHS Safety App

Who you are?

• NDT – Level II ASNT TC 1A certification in PT, MT, RT (film interpretation) techniques
• Leak Testing - ASNT TC 1A certification
• Knowledge in Material Specifications, NDE, ASME, IEC, ISA and FCI Standards
• Awareness of ISO Standards and Root Cause Analysis

For this role, you will need

• Degree or equivalent experience with 5+yrs, Diploma with 8+yrs, exp. in Quality Management in Valve industry
• Conversant with Control Valve accessories and instrumentation

Preferred Qualifications

• BGAS or NACE paint inspector certification
• Awareness on ISO standards, Lean Manufacturing, 5S, 8D
• Awareness or equivalent experience in HSE programs
• Conversant with Saudi Aramco Specifications
• Strong organizational and communication skills

Our Culture & Commitment to You!

At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives—because we know that great ideas come from great teams. Our dedication to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams, working together are key to driving growth and delivering business results.

We recognize the importance of employee wellbeing. We prioritize providing flexible, competitive benefits plans to meet you and your family’s physical, mental, financial, and social needs. We provide, medical insurance plans, Employee Assistance Program, tuition reimbursement, employee resource groups, recognition, and much more. Our culture prioritizes work-life balance and offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave.

Our training programs and initiatives focus on end-to end development, from onboarding through senior leadership. We provide a wide range of development opportunities, including face-to-face and virtual training, mentorship, and coaching, project management, and on-the-job training.

#J-18808-Ljbffr

Job Summary

This position created for handling incoming receiving inspection, in process inspection and final product inspection in Quality Assurance & Control function of Flow Controls, Jubail / Spark!

Responsibilities

• Sr. Quality Engineer : Read and understand Customer / Internal specifications and international standards
• Carry out receiving inspection as per Incoming Inspection plans
• Issue Corrective Action Request to Suppliers and follow up for close-out
• Review Material Test Certificates, NDE reports, valve & actuator certification pack etc.
• Carry out in-process inspection like heat no. verification, PMI, hardness, paint DFT etc.
• Carry out final Inspection and certification as per the PO & approved documents
• Carry out Special testing (Fugitive emission testing) of valves
• Perform Oracle transactions in Quality Module
• Coordination of Customer Inspection
• Arranging the Calibration of Instruments and maintaining the records.
• Maintaining / updating the ISO documentations & records
• Perform Supplier quality control activities, audits, qualification renewal, maintaining records and updating new suppliers in Worldwide Qualified Suppliers list.
• Issue rework form to the suppliers and coordinate / visit machine shops for the same
• Prepare and furnish supplier PPM data in global quality SharePoint and MEA
• Provide machining related clarification to the new trim part suppliers in India and local rework machine shops
• Preparation of Standard Operating Procedures, Quality Alerts, Safety instructions / initiatives
• Supervise the SCAR status in MEA quality share point, Review the effectiveness of CA provided by the suppliers and close the same. Co-ordinate with the respective world area SQE on delayed Scars.
• Prepare project specific Surface preparation & Painting procedures
• Train and qualify Painters in Jubail and maintain qualification records of the same
• Review project painting specifications for new projects & provide clarification on all painting related queries from PM and OE for Flow Controls
• Co-ordinating with shop on inspection and testing done in-house and report as required by the order (DFT, MEK, dolly pull off, x cut, salt contamination, dust test, holiday test etc.), monitoring the Blotter test and Air pressure tests and verifying the records maintained.
• Visiting external paint / coating shops / local suppliers for audits and quality checks as required
• Offer paint DFT and PMI inspection for Client / TPI inspectors and issue reports and supporting documents for the same
• Participation in PIM (All orders Aramco Direct and EPC orders), KOM, Customer Project Specific visits
• Support QP & Spec function to review Customer specifications related QMS & Factory Tests
• Perform CSP reviews with Suppliers for sophisticated CSPs
• Review Customer comments on QMS & Factory test procedures and provide resolution to Project lead
• Scheduling & handling challenging project witness stage inspections
• Support all in pipe team for smooth execution of projects
• Verify finished equipment against IPO, using final inspection checklist
• Create Final certificate in QA Docs for MRO and Projects
• Review material certificates, NDE reports and test reports against PS codes, customer documentation & special requirements
• Review Factory test results against IPO
• Plan, Notify for Customer Inspection, offer completed products for customer inspection
• Raise non-conformance and follow up for corrective action and close out.
• Review Root Cause & Corrective actions to ensure effectiveness of actions
• Liaise with third party inspectors for witnessing of inspection and ensure inspection requirements from Customer are met.
• Part number validation in Oracle
• Take ownership of Company’s Quality Policy & Core Values

EHS

• Consider EHS risks in decision-making and model safety as a core value every day.
• Work in accordance with Emerson’s Lifesaving Behaviors at all times.
• Report EHS concerns and / or unsafe conditions or unsafe behaviors immediately to a supervisor and raise further, as needed.
• Stop work when conditions pose the risk of harm to people, property, or the environment.
• Report all injuries immediately, regardless of the severity, to a supervisor.
• As vital, complete applicable safety training.
• Understand and implement safety-related responsibilities, as outlined in training, safety procedures, policies, and standards.
• Use only equipment / chemicals / processes for which they have been trained.
• Know the hazards of your job and follow your training to control associated risks.
• Actively participate in EHS continuous improvement activities (, safety & health audits, safety committees, focused improvement teams, process improvement projects, etc.).
• Ensure effective leadership in HSE, leading by example and setting the direction for a successful health and safety program and creating a foundation for a positive safety culture.
• Discuss Health and Safety first in every meeting.
• Ensure effective management of HSE risks and impacts. Report all hazards, incidents and Near Misses in line with the MEA Emerson HSE incident policy. Active involvement in the investigation of accidents, near misses, incidents and ill health where required.
• Attend all HSE training assigned to you as an employee
• utilization of the Emerson Velocity EHS Safety App

Who you are?

• NDT – Level II ASNT TC A certification in PT, MT, RT (film interpretation) techniques
• Leak Testing - ASNT TC A certification
• Knowledge in Material Specifications, NDE, ASME, IEC, ISA and FCI Standards
• Awareness of ISO Standards and Root Cause Analysis

For this role, you will need :

• Degree or equivalent experience with +yrs, Diploma with +yrs, exp. in Quality Management in Valve industry
• Conversant with Control Valve accessories and instrumentation

Preferred Qualifications

• BGAS or NACE paint inspector certification
• Awareness on ISO standards, Lean Manufacturing, S, D
• Awareness or equivalent experience in HSE programs
• Conversant with Saudi Aramco Specifications
• Strong organizational and communication skills

Our Culture & Commitment to You!

At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives—because we know that great ideas come from great teams. Our dedication to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams, working together are key to driving growth and delivering business results.

We recognize the importance of employee wellbeing. We prioritize providing flexible, competitive benefits plans to meet you and your family’s physical, mental, financial, and social needs. We provide, medical insurance plans, Employee Assistance Program, tuition reimbursement, employee resource groups, recognition, and much more. Our culture prioritizes work-life balance and offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave.

Our training programs and initiatives focus on end-to end development, from onboarding through senior leadership. We provide a wide range of development opportunities, including face-to-face and virtual training, mentorship, and coaching, project management, and on-the-job training.

#J-18808-Ljbffr

**Job Summary:**
This position created for handling incoming receiving inspection, in process inspection and final product inspection in Quality Assurance & Control function of Flow Controls, Jubail/Spark!
**Job Responsibilities:**
**Sr. Quality Engineer:**
+ Read and understand Customer/Internal specifications and international standards
+ Carry out receiving inspection as per Incoming Inspection plans
+ Issue Corrective Action Request to Suppliers and follow up for close-out
+ Review Material Test Certificates, NDE reports, valve & actuator certification pack etc.
+ Carry out in-process inspection like heat no. verification, PMI, hardness, paint DFT etc.
+ Carry out final Inspection and certification as per the PO & approved documents
+ Carry out Special testing (Fugitive emission testing) of valves
+ Perform Oracle transactions in Quality Module
+ Coordination of Customer Inspection
+ Arranging the Calibration of Instruments and maintaining the records.
+ Maintaining/updating the ISO documentations & records
+ Perform Supplier quality control activities, audits, qualification renewal, maintaining records and updating new suppliers in Worldwide Qualified Suppliers list.
+ Issue rework form to the suppliers and coordinate/visit machine shops for the same
+ Prepare and furnish supplier PPM data in global quality SharePoint and MEA
+ Provide machining related clarification to the new trim part suppliers in India and local rework machine shops
+ Preparation of Standard Operating Procedures, Quality Alerts, Safety instructions/initiatives
+ Supervise the SCAR status in MEA quality share point, Review the effectiveness of CA provided by the suppliers and close the same. Co-ordinate with the respective world area SQE on delayed Scars.
+ Prepare project specific Surface preparation & Painting procedures
+ Train and qualify Painters in Jubail and maintain qualification records of the same
+ Review project painting specifications for new projects & provide clarification on all painting related queries from PM and OE for Flow Controls
+ Co-ordinating with shop on inspection and testing done in-house and report as required by the order (DFT, MEK, dolly pull off, x cut, salt contamination, dust test, holiday test etc.), monitoring the Blotter test and Air pressure tests and verifying the records maintained.
+ Visiting external paint/coating shops/local suppliers for audits and quality checks as required
+ Offer paint DFT and PMI inspection for Client/TPI inspectors and issue reports and supporting documents for the same
+ Participation in PIM (All orders Aramco Direct and EPC orders), KOM, Customer Project Specific visits
+ Support QP & Spec function to review Customer specifications related QMS & Factory Tests
+ Perform CSP reviews with Suppliers for sophisticated CSPs
+ Review Customer comments on QMS & Factory test procedures and provide resolution to Project lead
+ Scheduling & handling challenging project witness stage inspections
+ Support all in pipe team for smooth execution of projects
+ Verify finished equipment against IPO, using final inspection checklist
+ Create Final certificate in QA Docs for MRO and Projects
+ Review material certificates, NDE reports and test reports against PS codes, customer documentation & special requirements
+ Review Factory test results against IPO
+ Plan, Notify for Customer Inspection, offer completed products for customer inspection
+ Raise non-conformance and follow up for corrective action and close out.
+ Review Root Cause & Corrective actions to ensure effectiveness of actions
+ Liaise with third party inspectors for witnessing of inspection and ensure inspection requirements from Customer are met.
+ Part number validation in Oracle
+ Take ownership of Company's Quality Policy & Core Values
**EHS:**
+ Consider EHS risks in decision-making and model safety as a core value every day.
+ Work in accordance with Emerson's 12 Lifesaving Behaviors at all times.
+ Report EHS concerns and/or unsafe conditions or unsafe behaviors immediately to a supervisor and raise further, as needed.
+ Stop work when conditions pose the risk of harm to people, property, or the environment.
+ Report all injuries immediately, regardless of the severity, to a supervisor.
+ As vital, complete applicable safety training.
+ Understand and implement safety-related responsibilities, as outlined in training, safety procedures, policies, and standards.
+ Use only equipment/chemicals/processes for which they have been trained.
+ Know the hazards of your job and follow your training to control associated risks.
+ Actively participate in EHS continuous improvement activities (e.g., safety & health audits, safety committees, focused improvement teams, process improvement projects, etc.).
+ Ensure effective leadership in HSE, leading by example and setting the direction for a successful health and safety program and creating a foundation for a positive safety culture.
+ Discuss Health and Safety first in every meeting.
+ Ensure effective management of HSE risks and impacts. Report all hazards, incidents and Near Misses in line with the MEA Emerson HSE incident policy. Active involvement in the investigation of accidents, near misses, incidents and ill health where required.
+ Attend all HSE training assigned to you as an employee
+ 100% utilization of the Emerson Velocity EHS Safety App
**Who you are?**
+ NDT - Level II ASNT TC 1A certification in PT, MT, RT (film interpretation) techniques
+ Leak Testing - ASNT TC 1A certification
+ Knowledge in Material Specifications, NDE, ASME, IEC, ISA and FCI Standards
+ Awareness of ISO Standards and Root Cause Analysis
**For this role, you will need:**
+ Degree or equivalent experience with 5+yrs, Diploma with 8+yrs, exp. in Quality Management in Valve industry
+ Conversant with Control Valve accessories and instrumentation
**Preferred Qualifications**
+ BGAS or NACE paint inspector certification
+ Awareness on ISO standards, Lean Manufacturing, 5S, 8D
+ Awareness or equivalent experience in HSE programs
+ Conversant with Saudi Aramco Specifications
+ Strong organizational and communication skills
**Our Culture & Commitment to You!**
At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives-because we know that great ideas come from great teams. Our dedication to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams, working together are key to driving growth and delivering business results.
We recognize the importance of employee wellbeing. We prioritize providing flexible, competitive benefits plans to meet you and your family's physical, mental, financial, and social needs. We provide, medical insurance plans, Employee Assistance Program, tuition reimbursement, employee resource groups, recognition, and much more. Our culture prioritizes work-life balance and offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave.
Our training programs and initiatives focus on end-to end development, from onboarding through senior leadership. We provide a wide range of development opportunities, including face-to-face and virtual training, mentorship, and coaching, project management, and on-the-job training.
**Requisition ID** :
Emerson is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment.

NielsenIQ is a global measurement and data analytics company that combines proprietary data with additional sources. In this role, the analyst will execute various data processing tasks, ensuring the accuracy and currency of the trade channel database. Responsibilities include verifying and updating records, processing store lists, and conducting research to improve data quality. The company's approach aims to provide actionable insights that help clients navigate the consumer marketplace effectively.

Required Qualifications and Skills

The position requires candidates to be 2023 or 2024 undergraduates in fields such as BBM, BBA, BA, BSc, or B Com. Good written and verbal command of English is necessary, alongside excellent communication skills suitable for interaction with US locations. Expertise in MS-Office applications, particularly Excel, Access, Word, and PowerPoint, is essential for effective performance in the role.

Disclaimer: Job and company description information and some of the data fields may have been generated via GPT-4 summarisation and could contain inaccuracies. The full external job listing link should always be relied on for authoritative information.

NIQ is the worlds leading consumer intelligence company, delivering the most complete understanding of consumer buying behavior and revealing new pathways to growth. In 2023, NIQ combined with GfK, bringing together the two industry leaders with unparalleled global reach. With a holistic retail read and the most comprehensive consumer insightsdelivered with advanced analytics through state-of-the-art platformsNIQ delivers the Full View(TM). NIQ, is an Advent International portfolio company with operations in 100+ markets, covering more than 90% of the worlds population. For more information, visitNIQ.com.

#J-18808-Ljbffr

Data Processing, Programmer Technician - DynCorp International, Saudi Arabia

Must have at least three years of computer programming including the ability to program in COBOL, RPG, Report Program Generator, and Control languages. Must have at least two years of working knowledge of the IBM AS Four Hundred Computer system.

Primary responsibility is the AS400 and related systems operations and administration functions. Also should have some general knowledge of Networking. Knowledge of AS400 DB2 and I series Access or other emulation software for the AS400.

Determines and develops methods to be used to convert flow chart data, data processing systems instructions, narrative, and verbal instructions into programming language by using flow charts, block diagrams, and flow diagrams to outline program routines or computer operations as required.

Writes program instructions, test, review, and corrects programs as required. Programs include COBOL, RPG, and Control Language.

Performs systems analysis functions as required on existing and new procedures. Operate computer equipment. Uses approved methods and procedures in the performance of the job.

Prepares and updates documentation as required for system changes, user manual, project proposal, program logic flow charts, file-storage descriptions, input-output formats, and other operating procedures.

Explain and/or demonstrate job duties and responsibilities and assist in training by providing on-the-job training for Saudi technicians and/or other personnel to include maintaining appropriate records on personnel such as Job Performance Guides.

Performs database queries to generate reports as required, using Query 400.

Establishes and administers system security procedures to secure access to the system on the AS400 Advanced Server. This includes periodic system-database backups, restores, and management of user names and passwords.

Maintains PC to AS400 router communications using Client Access for the AS400 System.

Shall perform other duties as qualified and assigned by his functional supervisor as needed.

Must have knowledge or ability to learn quickly, the United States Military Standard Requisitioning and Issue Procedures automated supply or equivalent civilian or military automated supply management system. We will consider on-the-job training in learning this supply system, assuming the work site has other Supply Specialist located in the unit who can assist with this OJT.

Must be able to analyze and develop computer programs, formats, structures and files in accordance with programming principles and techniques from flow charts, written narrative, or verbal instruction.

Must be able to prepare flow charts, diagrams, operating procedures, and methods.

Must be experienced with Windows 9X operating system and office applications, including installation and troubleshooting.

Must be able to build structure query reports using Query 400 query system for the AS400.

Must have demonstrated communication skills, both oral and written. Must be fluent in the English language.

Ability to read, write, speak, and understand Arabic is desirable.

Job Specification

Knowledge & Skills:
Must have at least three (3) years of recent (within three (3) years of application date) experience in computer programming with increasing responsibility and duties, including the ability to program in COBOL, RPG(Report Program Generator), and Control languages. Also must have experience with AS400 DB2; and I Series Access or other emulation software experience for the AS400.

Must have at least 2 years of working knowledge of the IBM AS 400 Computer system administration, security, and operations procedures; including ability to use install, and connect data processing terminals and other equipment provided by the RSLFAC.

Must have knowledge or ability to learn quickly, the United States Military Standard Requisitioning and Issue Procedures automated supply or equivalent civilian or military automated supply management system. We will consider on-the-job training in learning this supply system, assuming the work site has other Supply Specialist located in the unit who can assist with this OJT.

Must be able to analyze and develop computer programs, formats, structures and files in accordance with programming principles and techniques from flow charts, written narrative, or verbal instruction. Must be able to prepare flow charts, diagrams, operating procedures, and methods.

Must be experienced with Windows 9X operating system and office applications, including installation and troubleshooting. Must be able to build structure query reports using Query 400 query system for the AS400. Must be able to build structure query reports using Query 400 system for the AS400.

Physical Requirements:
Must be able to lift/push/pull a minimum of 25 pounds.

Education:
Must possess a minimum of a high school diploma and have successfully completed specialized training in computer programming at an accredited vocational school, college, or university. Must be capable of obtaining a valid light equipment operator’s license.

#J-18808-Ljbffr

We are seeking an International Data Processing Specialist to join our dynamic team. The ideal candidate will play a critical role in supporting data collection, processing, and analysis efforts with a focus on drone-based technologies and geospatial data. This role involves working with cutting-edge tools and software to deliver high-quality data products and insights for diverse projects around the globe.

Tasks and Responsibilities:

• Assist with planning and executing drone data collection missions.
• Process raw drone imagery and sensor data using photogrammetry software (e.g. Pix4D, Agisoft Metashape) to generate orthomosaics, point clouds, and other derived products.
• Perform geospatial data management, including organizing, cataloging, and archiving drone data.
• Conduct spatial analysis and modeling using GIS software (e.g. ArcGIS, QGIS).
• Generate maps, visualizations, and other deliverables to support project needs.
• Collaborate with cross-functional teams to understand project requirements and deliver high-quality work.
• Participate in training and professional development opportunities.

Education and Personal Strengths:

• Bachelor’s degree in Geography, Remote Sensing, GIS, Environmental Science, or a related field.
• Proficiency in photogrammetry software (e.g., Pix4D, Agisoft Metashape) and GIS software (e.g., ArcGIS, QGIS).
• Experience with drone data collection and processing workflows.
• Strong understanding of geospatial data management principles.
• Excellent analytical and problem-solving skills.
• Ability to generate professional-quality maps and visualizations.
• Strong communication and teamwork skills, with the ability to work in a collaborative, international environment.

Application Process:

If you would like to work with us, please send us your CV!
As soon as we find you compatible with an opening, we will get back to you.

Name

Email address

Upload CV
Only xls, xlsx, doc, docs, pdf, zip.
File size cannot exceed 5 MB.

#J-18808-Ljbffr

We are seeking an International Data Processing Specialist to join our dynamic team. The ideal candidate will play a critical role in supporting data collection, processing, and analysis efforts with a focus on drone-based technologies and geospatial data. This role involves working with cutting-edge tools and software to deliver high-quality data products and insights for diverse projects around the globe.

Tasks and Responsibilities:

• Assist with planning and executing drone data collection missions.
• Process raw drone imagery and sensor data using photogrammetry software (e.g. Pix4D, Agisoft Metashape) to generate orthomosaics, point clouds, and other derived products.
• Perform geospatial data management, including organizing, cataloging, and archiving drone data.
• Conduct spatial analysis and modeling using GIS software (e.g. ArcGIS, QGIS).
• Generate maps, visualizations, and other deliverables to support project needs.
• Collaborate with cross-functional teams to understand project requirements and deliver high-quality work.
• Participate in training and professional development opportunities.

Education and Personal Strengths:

• Bachelor’s degree in Geography, Remote Sensing, GIS, Environmental Science, or a related field.
• Proficiency in photogrammetry software (e.g., Pix4D, Agisoft Metashape) and GIS software (e.g., ArcGIS, QGIS).
• Experience with drone data collection and processing workflows.
• Strong understanding of geospatial data management principles.
• Excellent analytical and problem-solving skills.
• Ability to generate professional-quality maps and visualizations.
• Strong communication and teamwork skills, with the ability to work in a collaborative, international environment.

Application Process:

If you would like to work with us, please send us your CV!
As soon as we find you compatible with an opening, we will get back to you.

Name

Email address

Upload CV
Only xls, xlsx, doc, docs, pdf, zip.
File size cannot exceed 5 MB.

#J-18808-Ljbffr

We are seeking an International Data Processing Specialist to join our dynamic team. The ideal candidate will play a critical role in supporting data collection, processing, and analysis efforts with a focus on drone-based technologies and geospatial data. This role involves working with cutting-edge tools and software to deliver high-quality data products and insights for diverse projects around the globe.

Tasks and Responsibilities:

• Assist with planning and executing drone data collection missions.
• Process raw drone imagery and sensor data using photogrammetry software (e.g. Pix4D, Agisoft Metashape) to generate orthomosaics, point clouds, and other derived products.
• Perform geospatial data management, including organizing, cataloging, and archiving drone data.
• Conduct spatial analysis and modeling using GIS software (e.g. ArcGIS, QGIS).
• Generate maps, visualizations, and other deliverables to support project needs.
• Collaborate with cross-functional teams to understand project requirements and deliver high-quality work.
• Participate in training and professional development opportunities.

Education and Personal Strengths:

• Bachelor’s degree in Geography, Remote Sensing, GIS, Environmental Science, or a related field.
• Proficiency in photogrammetry software (e.g., Pix4D, Agisoft Metashape) and GIS software (e.g., ArcGIS, QGIS).
• Experience with drone data collection and processing workflows.
• Strong understanding of geospatial data management principles.
• Excellent analytical and problem-solving skills.
• Ability to generate professional-quality maps and visualizations.
• Strong communication and teamwork skills, with the ability to work in a collaborative, international environment.

Application Process:

If you would like to work with us, please send us your CV!
As soon as we find you compatible with an opening, we will get back to you.

Name

Email address

Upload CV
Only xls, xlsx, doc, docs, pdf, zip.
File size cannot exceed 5 MB.

#J-18808-Ljbffr

We are seeking an International Data Processing Specialist to join our dynamic team. The ideal candidate will play a critical role in supporting data collection, processing, and analysis efforts with a focus on drone-based technologies and geospatial data. This role involves working with cutting-edge tools and software to deliver high-quality data products and insights for diverse projects around the globe.

Tasks and Responsibilities:

• Assist with planning and executing drone data collection missions.
• Process raw drone imagery and sensor data using photogrammetry software (e.g. Pix4D, Agisoft Metashape) to generate orthomosaics, point clouds, and other derived products.
• Perform geospatial data management, including organizing, cataloging, and archiving drone data.
• Conduct spatial analysis and modeling using GIS software (e.g. ArcGIS, QGIS).
• Generate maps, visualizations, and other deliverables to support project needs.
• Collaborate with cross-functional teams to understand project requirements and deliver high-quality work.
• Participate in training and professional development opportunities.

Education and Personal Strengths:

• Bachelor’s degree in Geography, Remote Sensing, GIS, Environmental Science, or a related field.
• Proficiency in photogrammetry software (e.g., Pix4D, Agisoft Metashape) and GIS software (e.g., ArcGIS, QGIS).
• Experience with drone data collection and processing workflows.
• Strong understanding of geospatial data management principles.
• Excellent analytical and problem-solving skills.
• Ability to generate professional-quality maps and visualizations.
• Strong communication and teamwork skills, with the ability to work in a collaborative, international environment.

Application Process:

If you would like to work with us, please send us your CV!
As soon as we find you compatible with an opening, we will get back to you.

Name

Email address

Upload CV
Only xls, xlsx, doc, docs, pdf, zip.
File size cannot exceed 5 MB.

#J-18808-Ljbffr