102 Site Supervision jobs in Saudi Arabia

One of our clients is in the Metal Industry, in Saudi Arabia, and is hiring for the position of Quality Control Inspector.

Industry: Aluminum and Steel Manufacturing and Installation

Years of Experience: 2- 3

Education: Relevant Bachelors or a Masters Degree

Notice Period: Immediate joiners or a maximum one-month notice period.

We are seeking a meticulous and experienced Quality Control Inspector with strong knowledge in HVAC and ducting systems to ensure that all project installations comply with relevant codes, standards, and specifications. The ideal candidate will have a deep understanding of HVAC systems, duct fabrication and installation, and applicable quality standards.

1. Inspect HVAC and ducting installations on-site to ensure compliance with project specifications, drawings, and applicable standards (SMACNA, ASHRAE, etc.).
2. Conduct routine inspections and tests of duct materials, insulation, supports, air leakage, and alignment.
3. Monitor and verify duct fabrication processes to ensure quality workmanship and materials.
4. Collaborate with project engineers and contractors to resolve quality-related issues in a timely manner.
5. Maintain accurate documentation of inspections, test reports, non-conformance reports (NCRs), and corrective actions.
6. Verify and ensure proper installation of HVAC equipment (AHUs, FCUs, exhaust fans, etc.) and alignment with duct systems.
7. Perform quality checks during pressure testing, air balancing, and commissioning stages.
8. Assist in developing and updating the quality control procedures and checklists for HVAC and ducting work.
9. Ensure all work complies with safety standards and company policies.

1. Diploma or Degree in Mechanical Engineering or a related technical field.
2. Minimum of 3 years of experience in HVAC and ducting inspection or quality control.
3. Familiarity with relevant standards (SMACNA, ASHRAE, ISO, etc.).
4. Strong knowledge of HVAC drawings, layouts, and schematic diagrams.
5. Good communication and reporting skills.
6. Attention to detail and strong analytical skills.
7. Certification in QA/QC or HVAC (preferred but not mandatory).

1. Experience working in large-scale MEP or construction projects.
2. Proficiency in MS Office, AutoCAD, and report preparation tools.
3. Knowledge of duct fabrication techniques and materials.

Note: We thank all applicants for their interest however, only those candidates who are shortlisted will be contacted.

Construction and Real Estate Risk Management

• Assist in monitoring construction projects to identify potential compliance issues.
• Support forensic reviews of procurement and contracting processes.
• Collect, analyze, and organize data related to project performance and risks.
• Conduct site visits. Participate in, or conduct, interviews with project stakeholders.
• Prepare preliminary reports and summaries for senior management teams.
• Collaborate with cross-functional teams to implement integrity monitoring procedures.

• Degree in construction management, engineering,and/or related field.
• 3+ Years of project management experience.
• Airport experience required.
• Basic understanding of compliance procurement processes and risk management.
• Strong analytical and communication skills.
• Ability to work collaboratively on a team.
• Multilingual skills (Arabic and English) strongly preferred.
• Ideal candidates will also hold one or more of the following certifications or credentials: Certified Public Accountant (CPA); Licensed Professional Engineer (P.E.); Certified Fraud Examiner (CFE); and/or Certified Internal Auditor (CIA).

This role is located onsite in the Middle East.

Looking for a financial crimes, risk, or regulatory advisory firm?
Contact us today to find out how we can help you manage risk.

Embark on an exciting opportunity in Saudi Arabia as a Quality Control Supervisor with a renowned Drilling and Construction Contractor onshore. If you are ARAMCO approved and have a keen eye for detail, this role is perfect for you!

Requirements:

• Control Supervisor shall have a university degree OR equivalent and a total of seven years inspection experience OR a high school diploma with a total of ten years inspection experience . At a minimum, he shall have three (3) years directly relating to supervision of construction activities in the Contract Scope of WORK (e.g., oil, gas and petrochemical projects, Infrastructure, communication).
• ARAMCO approved
• Strong understanding of onshore construction processes.
• Excellent communication and analytical skills.

Embark on an exciting opportunity in Saudi Arabia as a Quality Control Supervisor with a renowned Drilling and Construction Contractor onshore. If you are ARAMCO approved and have a keen eye for detail, this role is perfect for you!

Requirements:

• Control Supervisor shall have a university degree OR equivalent and a total of seven years inspection experience OR a high school diploma with a total of ten years inspection experience . At a minimum, he shall have three (3) years directly relating to supervision of construction activities in the Contract Scope of WORK (e.g., oil, gas and petrochemical projects, Infrastructure, communication).
• ARAMCO approved
• CBT passed
• Strong understanding of onshore construction processes.
• Excellent communication and analytical skills.

• Job Title: Quality Control Supervisor
• Projects: Onshore Saudi Arabia
• Location: KSA
• Rotation: Various rotation schemes are on offer, 120/16 days on/off - 60 weekly hours OR 75/21 for 60 weekly hours
• There is also the possibility of offshore missions.
• Payment is monthly, during on and off days
• Salary: Please state your realistic expected monthly wage when applying. This will be discussed with the right candidate.
  
• Start date: TBC
  
• Travel, accommodation and food provided by the company during the days on

Company Industry

• Shipping

Department / Functional Area

• Quality
• Testing
• QA
• QC
• Inspector

Keywords

• Quality Control Supervisor | Onshore Oil And Gas Construction | ARAMCO Approved

Disclaimer: Naukrigulf.com is only a platform to bring jobseekers & employers together. Applicants are advised to research the bonafides of the prospective employer independently. We do NOT endorse any requests for money payments and strictly advice against sharing personal or bank related information. We also recommend you visit Security Advice for more information. If you suspect any fraud or malpractice, email us at

Job Purpose

The Quality Inspector is responsible for inspecting all inbound deliveries before acceptance.

The role involves ensuring that all received products meet Panda Specifications (where available) and that no sub-standard products enter the Panda Food Chain.

Compliance with local (SASO, SFDA) and international quality and food safety standards is essential.

Functional Responsibilities:

QC - Produce / Deli

• Scheduling and preparing for receiving fresh deliveries daily.
• Following the DC receiving SOP and applying sampling plans during product reception in coordination with the TL.
• Checking the temperature of vendor vehicles and products before offloading and prior to dispatch to stores.
• Inspecting products and making recommendations to the TL and Assistant QC Manager to receive or reject deliveries based on set specifications.
• Documenting all non-conformities with photographs and reporting them to the TL.
• Accurately completing all required documentation, including receiving logs and inspection checklists.
• Ensuring proper storage practices according to product categories and conditions.
• Adhering to Panda Receiving Processes.
• Checking Brix and firmness for relevant fruits based on specifications.
• Monitoring the pest control system in the DC to prevent pest infestations.

Job Purpose

Quality Inspector responsibilities include checking all inbound deliveries before receipt. The role ensures quality inspection of all received products to confirm they meet Panda Specifications (where available) and to prevent sub-standard products from entering Panda Food Chain. The inspector must ensure compliance with local (SASO/ SFDA) and international quality and food safety standards.

1. QC - Produce / Deli
2. Schedule and prepare for receiving fresh deliveries daily.
3. Follow the DC receiving SOP and sampling plan for product receiving and inspection in coordination with the TL.
4. Check temperatures of vendor vehicles and products before offloading and dispatching deliveries to stores.
5. Inspect products and recommend to the TL and Assistant QC Manager whether to receive or reject deliveries based on product specifications.
6. Document all non-conformities with photos and report them to the TL.
7. Accurately complete all receiving logs and inspection checklists on time.
8. Ensure proper storage practices according to product categories and storage conditions.
9. Ensure conformance to Panda Receiving Processes.
10. Check Brix and firmness for fruits based on specifications.
11. Monitor the pest control system in the DC to prevent pest infections.

• Diploma required; college level preferred.
• Familiarity with QA regulations set by the Corporate QA Team.
• Proficiency in English; knowledge of Arabic is an advantage.
• Ability to work independently and be self-motivated.
• Strong leadership and decision-making skills.
• Ability to recommend improvements to standards and processes.
• Ability to justify rejection of deliveries with technical explanations.
• Proficient in computer skills, including email, reporting, digital photography, and use of industrial thermometers.
• Previous experience in related fields, especially in fresh produce, grocery foods, is mandatory.

To execute quality control processes, inspection, and documentation in order to meet project specifications and customer expectations, while ensuring compliance with regulatory standards and company policies.

Job Responsibilities:

1) Daily Operations:

• Implement the day-to-day operations assigned to the Quality Control Department to ensure compliance with the established standards and procedures.
• Identify opportunities for continuous improvement of systems, processes and practices considering ‘international best practice’, improvement of business processes, cost reduction and productivity improvement.
• Review reports of the Quality Control Department timely and accurately to meet company and department requirements, policies, and standards.

2) Specific Job Accountabilities:

• Develop and implement a strategic monthly inspection schedule that optimizes inspector assignments ensuring thorough quality assessments, efficient resource utilization, and alignment with project timelines and quality objectives.
• Review all project quality control documentation, including procedures, inspections, test plans, checklists, forms, etc. ensuring that they meet the project’s specifications.
• Proactively address and resolve quality control issues by implementing an effective escalation process to ensure rapid engagement and resolution by senior management.
• Ensure compliance with local and international quality control requirements as well as company policies and procedures.
• Review, sign, and submit QA/QC prepared by inspectors to clients, in a timely and accurate manner.
• Review the Non-Conformity Report (NCR) submitted by the client and conduct root cause analysis, formulate preventive/corrective actions in coordination with QA Team.
• Participate in periodically audits by preparing the required QC documentation and evidence of compliance.
• Monitor and analyse quality control processes to identify opportunities for improvement and implement changes to increase efficiency and quality.

3) Direction of Subordinates:

• Organize and supervise the activities and work of inspectors to ensure that all work is carried out in an efficient and procedurally compliant manner.
• Evaluate team performance, provide formal and informal feedback, identify training needs, and implement development programs to enhance skills and knowledge.
• Provide instructions to subordinates and monitor their adherence to relevant policies and procedures so that work is carried out in a controlled manner.

5) Safety, Quality & Environment:

• Comply with all relevant safety, quality and environmental management policies, procedures and controls to ensure a healthy and safe work environment.

Qualifications:

• Bachelor’s degree in industrial or mechanical or any related filed in engineering.
• 7+ years relevant experience in quality control in the construction industry.
• Certificate in ISO 9001 & ISO 45001 is required.
• Leadership, communication, and documentation development skills are required.
• Familiar with construction codes (AWS, EN, AISC, ASME & Aramco)
• Certificates such as Certified Welding Inspector and Certified Coating Inspector are mandatory.

• Seniority level Mid-Senior level

• Employment type Full-time

• Job function Administrative, Engineering, and Other
• Industries Manufacturing, Civil Engineering, and Engineering Services

Referrals increase your chances of interviewing at International Building Systems Factory Co. LTD. by 2x

We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.

Job Accountability & Activities:

1. Develop and maintain the document system that controls the organization's quality standards, including amending, reviewing, and issuing.
2. Ensure all personnel are adequately trained on procedures affecting their job function and aware of their role within the QA system.
3. Coordinate and execute internal Quality Audits at least twice a year to ensure correct implementation of the Quality Assurance System.
4. Maintain contract with the official certification organization and manage inspection and calibration records.
5. Identify and eliminate non-conformances within the quality system, and ensure corrective actions are taken.
6. Identify and implement training for personnel on quality assurance needs, especially for system changes.
7. Register and follow up on customer, internal, and supplier complaints.
8. Prepare pre-qualification documents, technical submittals, and marketing materials.
9. Update catalog and maintain technical standards and specifications.
10. Coordinate internal sales activities, including follow-up on quotations and customer technical support.
11. Prepare and control the company's QA manual and all quality documentation.
12. Perform internal and external audits on behalf of the company's management.
13. Verify customer quality requirements documentation submittals.
14. Monitor the progress and effectiveness of the project quality management system and recommend improvements.
15. Coordinate quality-related correspondence with customers.
16. Review and amend the QMS to suit changing business trends and organizational structure.
17. Handle customer third-party audits and initiate necessary corrective and preventive actions.
18. Manage the calibration and maintenance of measuring/testing equipment.
19. Review the correctness of job-specific quality records prior to issuance to clients.
20. Ensure consistent conformity of products/services to meet customer satisfaction.

Experience/Education & Certification:

• Bachelor's degree in Engineering, preferably Polymer engineering.
• ISO 9001, 14001, and 45001 internal Auditor or Lead Auditor Certification.

Behavior Skills/Competencies:

• Decision-making
• Teamwork
• Demonstrable experience in quality auditing
• Initiative-taking
• Experience in document management processes
• Good communication skills
• Commitment to Quality
• Effective, analytical, and problem-solving skills
• Ability to supervise others
• Effective computer skills

Required Experience:

5-6 years experience in a similar work environment, with a preference for manufacturing experience.

If you are interested, please share your CV with the job title to: .

You can also share it in the form.

Jamjoom Pharma has in a very short span of time emerged, as one of the leading pharmaceutical companies in the Afrasia region. The geographical focus of the company is on countries in the Middle East, Africa, and CIS regions. Strategic focus on selected therapeutic categories has contributed to the rapid growth, market acceptance, and overall success of the company.

Role Summary:

To conduct routine and non-routine chemical analysis of bulk, intermediate and finished products and to ensure its compliance with specification and to ascertain that analysis is completed according to established Standard Operating Procedures (SOP’s). To perform routine and Critical Tests in Finished goods samples.
To qualify Raw material as Secondary Reference Standards as per protocol.

Responsibilities:

• Analysis of Finish Products as per the schedule with emphasis on first pass analysis.
• Inventory of Lab requirements including Glassware/ Stationary .
• Work in another department whenever required like AMD (due to unavailability of instrument in QC)
• To provide training to trainee's on the analytical techniques used for the Finish Goods analysis.
• To learn incorporation of data and other functions related to SAP.
• cGMP / GLP Compliance in QC Laboratory. Maintain good documentation practices.
• To maintain reference standards, chemicals, reagents, and solvents.
• Raise OOS and fill LIR in given time Frame.
• Perform testing of market complaint samples whenever required.
• To look for logbooks for proper entries.
• Maintenance & Daily checks of Analytical Balance, pH Meters.
• Support in procurement procedure related to instruments/Reagents/Standards.
• To prepare User requirement for the CAPEX approved instruments.
• Carryout Analytical Method transfer between the two labs.

Qualifications:

• Bachelor’s or Master’s degree in Chemistry .
• 3 to 4 years’ experience in Pharmaceuticals Quality Control
• Basic fire safety Awareness .
• Knowledge of Pharmaceutical products.
• Data analysis and good observation capabilities .
• Familiarized with cGMP and SFDA regulatory compliance.

Job Title: Quality Control Engineer – Process & Testing

Industry / Domain: Electrical Manufacturing (Switchgear, RMU, Panels, Meters, Metering Solutions)

Role Purpose:

To collaborate closely with the assembly and production teams to ensure products meet established quality standards. Responsible for overseeing testing machine maintenance activities and process monitoring to maintain operational excellence, meet production commitments, and ensure customer satisfaction.

1. Key Responsibilities

A. Manufacturing Quality Control & Compliance

• Implement quality control procedures as per ISO 9001 and ISO 17025 standards.
• Conduct Pre-Production Qualification Tests (PQT), First Article Inspections (FAI), and Final Acceptance Tests (FAT).
• Manage Non-Conformance Reports (NCRs); track and implement corrective and preventive actions.
• Ensure raw materials, in-process items, and finished goods meet defined specifications.
• Oversee Incoming Goods Inspection (IGI) and evaluate supplier quality performance.
• Monitor and align Taqyees Reports with Finance for SASO certification fee processing.

B. Inspection, Testing & Calibration

• Conduct routine inspections, accuracy tests, and product/component quality checks.
• Ensure calibration and maintenance of testing equipment per ISO 17025 requirements.
• Maintain accurate documentation of test results, inspection records, and quality audits.

C. Process Improvement & Root Cause Analysis

• Analyze defects, process deviations, and trends to drive continuous improvement.
• Apply Lean Manufacturing, Six Sigma, and SPC techniques to reduce waste and improve quality.
• Lead Root Cause Analysis (RCA) investigations and implement corrective actions.
• Collaborate with production to optimize efficiency and reduce rework or scrap.

D. Reporting & Documentation

• Maintain and update QC plans, inspection checklists, and audit documentation.
• Prepare regular quality reports and performance summaries for management.
• Support internal and external audits to ensure regulatory compliance.
• Coordinate with Production, R&D, and Maintenance teams to resolve quality issues.
• Liaise with suppliers to ensure product conformity and resolve non-conformities.
• Train QC inspectors and operators on quality standards and procedures.

2. Qualifications

Education & Certifications

• Bachelor’s Degree in Electrical, Industrial, or related Engineering fields.
• Preferred Certifications:
• ISO 17025 (for calibration and laboratory environments)

3. Core Skills

• Strong knowledge of ISO 9001, ISO 17025, and quality management systems.
• Proficient in quality tools, SPC, and statistical analysis software.
• Experienced in Lean Manufacturing, Six Sigma, 5S, and RCA methodologies.
• Skilled in documentation, reporting, and internal audit preparation.
• Effective communication and coordination across departments.
• Ability to manage cross-functional teams and train staff on quality practices.
• Computer Skills:
• MS Office (Word, Excel, PowerPoint – Beginner to Intermediate Level)
• Quality/ERP Systems (preferred)
• Strong written and verbal English communication, especially for emails, reports, and presentations.

• Seniority level Mid-Senior level

• Employment type Full-time

• Job function Manufacturing
• Industries Appliances, Electrical, and Electronics Manufacturing and Electrical Equipment Manufacturing

Referrals increase your chances of interviewing at Abunayyan Holding by 2x

Riyadh, Riyadh, Saudi Arabia 16 hours ago

Riyadh, Riyadh, Saudi Arabia 17 hours ago

Riyadh, Riyadh, Saudi Arabia 23 hours ago

We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.