459 Senior Inspector jobs in Saudi Arabia

Get AI-powered advice on this job and more exclusive features.

Department: Quality Assurance / Quality Control

Industry: Infrastructure, Landscaping, and Design

Role Purpose:

To ensure quality standards are effectively implemented and maintained across Citiscape's infrastructure, landscaping, and design projects. The QA/QC Inspector will be responsible for inspecting materials, workmanship, and construction processes to ensure compliance with project specifications, regulatory requirements, and client expectations on mega/giga projects.

Key Responsibilities:

1. Quality Assurance & Inspection

• Conduct inspections on-site to verify compliance with approved drawings, specifications, and quality standards.
• Inspect materials, workmanship, and installation methods for infrastructure and landscaping elements.
• Monitor construction activities, ensuring that QA/QC procedures are followed throughout all phases of the project.

2. Project-Specific QA/QC Implementation

• Support quality planning, ITP (Inspection and Test Plan) implementation, and document control.
• Review and verify subcontractor and supplier quality compliance.
• Participate in material submittal reviews and sample approvals.

3. Documentation & Reporting

• Prepare daily and weekly inspection reports, NCRs (Non-Conformance Reports), and quality records.
• Maintain detailed QA/QC documentation including checklists, method statements, and inspection logs.
• Support preparation for internal and external audits.

4. Coordination & Communication

• Coordinate with site engineers, consultants, and client representatives on quality issues.
• Assist in resolving technical and quality-related issues on-site.
• Support QA/QC Engineers and the Quality Manager in achieving project quality objectives.

5. Compliance & Best Practices

• Ensure compliance with relevant international and local standards (e.g., ISO 9001).
• Promote a quality-focused culture on-site through ongoing communication and awareness.
• Identify areas of improvement and support continuous quality improvement initiatives.

Qualifications & Experience:

Education:

• Bachelor's Degree in QA/QC, Civil Engineering, Landscape Architecture, or a related discipline.

Certifications:

• ISO 9001 (Quality Management Systems)
• Additional QA/QC-related certifications are an advantage

Experience:

• Minimum 5+ years of QA/QC experience in infrastructure, landscaping, or public realm projects .
• Must have direct exposure to mega/giga projects such as Qiddiya, Roshn, Red Sea, King Salman Park, Green Riyadh , or similar high-profile developments.
• Strong understanding of materials, finishing standards, and landscaping methods used in large-scale projects.
• Excellent knowledge of QA/QC procedures, standards, and inspection techniques
• Proficient in interpreting technical drawings, method statements, and ITPs
• Strong communication and documentation skills
• Familiarity with quality software tools and MS Office Suite
• Ability to work in a fast-paced, multi-disciplinary project environment
• Detail-oriented with strong analytical and problem-solving skills

• Seniority level Associate

• Employment type Full-time

• Job function Quality Assurance and Engineering
• Industries Construction and Building Construction

Referrals increase your chances of interviewing at Abunayyan Holding by 2x

Riyadh, Riyadh, Saudi Arabia 10 hours ago

We're unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.

• Day to day inspection and reporting activities.
• Work in accordance with ARM QMS and HSE procedures& policies.
• Supporting workshop foreman in monitoring, identification, and traceability process.
• Perform timely incoming inspection (materials, steel structures, capital equipment, mechanical parts).
• Review and approval of supplier inspection report.
• Perform timely quality inspection in accordance with Inspection and Test Plan (ITP), Router, drawings and quality instructions in the shops.
• Perform visual and dimensional control of weld joints.
• Perform visual, dimensional control of steel structures, including quality of painting.
• Review and control of painting production process (temperature, humidity, thickness of wet and dry layer)
• Perform required NDT inspection or review NDT reports (for outsourced NDT processes)
• Prepare required inspection reports.
• Monitoring and maintain the measurement instrument/ equipment calibration up to date.
• Create Non-conformance reports (NCRs), when required. Provide marking and isolation of nonconforming products/ parts.
• Create disposition plan for every Non-conformance report, monitoring status of created NCRs and implementation of disposition.
• Re-inspect nonconforming products/ parts after repair/rework.
• Need to perform duty as and when required by Shop supervisors and job priority.
• Involve in internal and external audits.
• Perform another work-related task as assigned.

• Perform a wide verity of inspection and quality control operations in visual, dimensional, and functional nature, making necessary critical observations, tests, or competing appropriate documentation as required.

• High School Diploma or equivalent.
• AWS/CSWIP CSWIP 3.1 Certified Welding Inspector as minimum.

• Minimum 3 years of weld visual inspection experience.
• Knowledge in reading and interpreting engineering drawings.
• Familiar with API 4F, 8C, and 16A, and AWS D1.1 code requirements.

• NDT Level II for PT, MT & UT.
• NACE or BGas Certified Coating Inspector level II.

• Good understanding of the Company Quality Management System
• Knowledge in reading and interpreting engineering drawings; AWS D1.1 inspection criteria; and understanding material specifications and requirements.
• Acceptable skills in use of inspection and measuring equipment.
• Good computer skills
• Good skills in oral and written communications, fluent English
• Organized, detailed and accurate in work assignments.

• Inspect, test, and measure materials using gauges, calipers, and micrometers, as well as operate electronic inspection equipment to ensure that all necessary procedures and products are inspected to a high standard
• Conduct visual and dimensional inspection, to ensure the parts, components, sub-assemblies and assemblies and the SRP, s meet the approved designs and specifications. Any deviations or non-conformances including proposed changes shall be communicated to “QC Manager”
• Maintain detailed testing records
• Provide visual inspection and measurement confirmation for outgoing equipment assemblies, and maintain inspection records and reports
• Ensure that all processes, procedures, specifications and applicable work instruction required for the quality control process are understood, followed and appropriate records are maintained
• Maximize output and efficiency
• Accurate maintenance of quality records
• Develop and implement any required Quality Control plans
• Ensure all incoming products, components, services, SRP and activities meet the specifications
• Resolve issues that arise with MTR and other shipping documents
• Assist with other purchasing/QC/document control duties as they arise
• Suggest QMS documents improvements or revisions
• Calibrate and maintain records of TMMDE calibration status
• Approve final quality control documents such a product and SRP release
• Review and approve supplier quality documentation including secondary process reports for coatings, heat treat, welding, carbide application, MTC, s, COC, s and dimensional inspection reports
• Generate and inputs NCR, s into the NCR database for any discrepancies / Non conformances with requirements, product components, services, SRP or activities that do not meet the engineering and/or order requirements
• Position Requirements
  
  

• Experience and training in CNC machining and programing and usage and experience in CMM is an asset Experience with following QMS and applicable industry standard requirements such as ISO 9001, API Q1 and API Q2 Experience in continually improving the Quality Management System processes Intermediate proficiency with Microsoft Office Suite (Excel, Word, Outlook) Knowledge of Packers Plus processes (is an asset)
• Data-oriented with the ability to analyze data and draw conclusions Knowledge of raw materials an asset
• Excellent oral and written communication skills
• Based in the Kingdom of Saudi Arabia
  
  

• post-secondary education in Business Management or Engineering. Course work in Quality Control, or equivalent experience an asset
  
  

• Position is Safety Sensitive and subject to a pre-employment medical assessment and drug and alcohol testing
• Subject to post-incident and reasonable-cause drug and alcohol testing
• Extended periods of standing at an inspection bench or table using TMMDE
• Proficient use of a computer, monitor, keyboard, and mouse
  
  

• Customer Intimacy
• Operational Excellence
• Innovation
  
  

• Strategic Agility and Thinking
• Impact and Influence
• Processes and Procedures
• Analytical Thinking
• Planning and organizing
• Problem Solving
• Relationship Building
  
  

Key Tasks and Responsibilities

• Inspect, test, and measure materials using gauges, calipers, and micrometers, as well as operate electronic inspection equipment to ensure that all necessary procedures and products are inspected to a high standard.
• Conduct visual and dimensional inspection to ensure parts, components, sub-assemblies and assemblies and the SRP meet the approved designs and specifications. Any deviations or non-conformances including proposed changes shall be communicated to the QC Manager.
• Maintain detailed testing records.
• Provide visual inspection and measurement confirmation for outgoing equipment assemblies, and maintain inspection records and reports.
• Ensure that all processes, procedures, specifications and applicable work instructions required for the quality control process are understood, followed and appropriate records are maintained.
• Maximize output and efficiency.
• Accurate maintenance of quality records.
• Develop and implement any required Quality Control plans.
• Ensure all incoming products, components, services, SRP and activities meet the specifications.
• Resolve issues that arise with MTR and other shipping documents.
• Assist with other purchasing/QC/document control duties as they arise.
• Suggest QMS documents improvements or revisions.
• Calibrate and maintain records of TMMDE calibration status.
• Approve final quality control documents such as product and SRP release.
• Review and approve supplier quality documentation including secondary process reports for coatings, heat treat, welding, carbide application, MTC, SQC and dimensional inspection reports.
• Generate and inputs NCRs into the NCR database for any discrepancies or Non-conformances with requirements, product components, services, SRP or activities that do not meet the engineering and/or order requirements.

• Experience and Skills: 5-10 years of Quality Control and inspection experience, preferably in the Oil and Gas industry downhole equipment manufacturing sector (international experience an asset).
• Experience and training in CNC machining and programming, use, and experience in CMM is an asset. Experience with QMS and applicable industry standard requirements such as ISO 9001, API Q1 and API Q2. Experience in continually improving the Quality Management System processes. Intermediate proficiency with Microsoft Office Suite (Excel, Word, Outlook). Knowledge of Packers Plus processes is an asset.
• Data-oriented with the ability to analyze data and draw conclusions. Knowledge of raw materials is an asset.
• Excellent oral and written communication skills.
• Based in the Kingdom of Saudi Arabia.

• Post-secondary education in Business Management or Engineering. Course work in Quality Control, or equivalent experience an asset.

• Position is Safety Sensitive and subject to a pre-employment medical assessment and drug and alcohol testing. Subject to post-incident and reasonable-cause drug and alcohol testing. Extended periods of standing at an inspection bench or table using TMMDE. Proficient use of a computer, monitor, keyboard, and mouse.
• Compliance with Packers Plus Health and Safety Program.

• Packers Plus Values: Customer Intimacy, Operational Excellence, Innovation.
• Role Competencies: Strategic Agility and Thinking, Impact and Influence, Processes and Procedures, Analytical Thinking, Planning and organizing, Problem Solving, Relationship Building.

Overview

Quality Control Inspector – Landscape Construction

The role: We are seeking a Quality Control Inspector with strong landscape construction experience to oversee day-to-day site inspections, ensuring compliance with drawings, specifications, and industry standards. You will be the on-site guardian of quality, verifying that both hardscape and softscape works meet client and regulatory requirements.

• Carry out daily inspections of landscape works: earthworks, hardscape (pavers, kerbs, stone, concrete), softscape (soil prep, planting, turf), irrigation, and drainage.
• Verify materials delivered to site (plants, soil, aggregates, pipes, valves, fittings) against approved submittals and standards.
• Witness and document testing and inspections as per ITPs and method statements.
• Monitor and record workmanship quality , identifying non-conformances and ensuring corrective actions are taken.
• Assist in maintaining inspection logs, checklists, photographs, and test reports for traceability.
• Support preparation of punch lists, NCRs, and close-out documentation.
• Liaise with site supervisors, subcontractors, and the QA/QC Engineer to resolve quality issues.
• Ensure works comply with project specifications, drawings, and HSE requirements .

• Bachelor’s in Civil Engineering or Mechanical.
• 3–6 years’ experience as a Quality Inspector or similar role in landscape construction/infrastructure projects .
• Knowledge of landscape standards for planting, soil preparation, irrigation systems, and hardscape finishes.
• Familiarity with ITPs, method statements, and NCR processes .
• Strong attention to detail and ability to enforce compliance on-site.
• Proficiency in MS Office ; knowledge of AutoCAD/inspection apps is an advantage.
• Strong communication and coordination skills with consultants and site teams.

• Associate

• Full-time

• Quality Assurance

• Construction

Overview

Quality Control Inspector role at NOV. Responsible for day-to-day inspection and reporting activities, ensuring compliance with ARM QMS and HSE procedures and policies, and supporting the workshop foreman in monitoring, identification, and traceability processes.

• Day to day inspection and reporting activities.
• Work in accordance with ARM QMS and HSE procedures & policies.
• Support workshop foreman in monitoring, identification, and traceability process.
• Perform timely incoming inspection (materials, steel structures, capital equipment, mechanical parts).
• Review and approval of supplier inspection report.
• Perform timely quality inspection in accordance with Inspection and Test Plan (ITP), Router, drawings and quality instructions in the shops.
• Perform visual and dimensional control of weld joints.
• Perform visual, dimensional control of steel structures, including quality of painting.
• Review and control of painting production process (temperature, humidity, thickness of wet and dry layer).
• Perform required NDT inspection or review NDT reports (for outsourced NDT processes).
• Prepare required inspection reports.
• Monitoring and maintain the measurement instrument/equipment calibration up to date.
• Create Non-conformance reports (NCRs), when required. Provide marking and isolation of nonconforming products/parts.
• Create disposition plan for every Non-conformance report, monitoring status of created NCRs and implementation of disposition.
• Re-inspect nonconforming products/parts after repair/rework.
• Need to perform duty as and when required by Shop supervisors and job priority.
• Involve in internal and external audits.
• Perform another work-related task as assigned.

• Perform a wide variety of inspection and quality control operations in visual, dimensional, and functional nature, making necessary critical observations, tests, or completing appropriate documentation as required.

• High School Diploma or equivalent.
• AWS/CSWIP CSWIP 3.1 Certified Welding Inspector as minimum.

• Minimum 3 years of weld visual inspection experience.
• Knowledge in reading and interpreting engineering drawings.
• Familiar with API 4F, 8C, and 16A, and AWS D1.1 code requirements.

• NDT Level II for PT, MT & UT.
• NACE or BGas Certified Coating Inspector level II.

• Good understanding of the Company Quality Management System
• Knowledge in reading and interpreting engineering drawings; AWS D1.1 inspection criteria; and understanding material specifications and requirements.
• Acceptable skills in use of inspection and measuring equipment.
• Good computer skills
• Good skills in oral and written communications, fluent English
• Organized, detailed and accurate in work assignments.

Note: This description reflects the job content originally provided and removes duplicates and non-relevant boilerplate while preserving core responsibilities and qualifications.

• Inspect, test, and measure materials using gauges, calipers, and micrometers, as well as operate electronic inspection equipment to ensure that all necessary procedures and products are inspected to a high standard
• Conduct visual and dimensional inspection, to ensure the parts, components, sub-assemblies and assemblies and the SRP, s meet the approved designs and specifications. Any deviations or non-conformances including proposed changes shall be communicated to "QC Manager"
• Maintain detailed testing records
• Provide visual inspection and measurement confirmation for outgoing equipment assemblies, and maintain inspection records and reports
• Ensure that all processes, procedures, specifications and applicable work instruction required for the quality control process are understood, followed and appropriate records are maintained
• Maximize output and efficiency
• Accurate maintenance of quality records
• Develop and implement any required Quality Control plans
• Ensure all incoming products, components, services, SRP and activities meet the specifications
• Resolve issues that arise with MTR and other shipping documents
• Assist with other purchasing/QC/document control duties as they arise
• Suggest QMS documents improvements or revisions
• Calibrate and maintain records of TMMDE calibration status
• Approve final quality control documents such a product and SRP release
• Review and approve supplier quality documentation including secondary process reports for coatings, heat treat, welding, carbide application, MTC, s, COC, s and dimensional inspection reports
• Generate and inputs NCR, s into the NCR database for any discrepancies / Non conformances with requirements, product components, services, SRP or activities that do not meet the engineering and/or order requirements
• Position Requirements
  
  

• Experience and training in CNC machining and programing and usage and experience in CMM is an asset Experience with following QMS and applicable industry standard requirements such as ISO 9001, API Q1 and API Q2 Experience in continually improving the Quality Management System processes Intermediate proficiency with Microsoft Office Suite (Excel, Word, Outlook) Knowledge of Packers Plus processes (is an asset)
• Data-oriented with the ability to analyze data and draw conclusions Knowledge of raw materials an asset
• Excellent oral and written communication skills
• Based in the Kingdom of Saudi Arabia
  
  

• post-secondary education in Business Management or Engineering. Course work in Quality Control, or equivalent experience an asset
  
  

• Position is Safety Sensitive and subject to a pre-employment medical assessment and drug and alcohol testing
• Subject to post-incident and reasonable-cause drug and alcohol testing
• Extended periods of standing at an inspection bench or table using TMMDE
• Proficient use of a computer, monitor, keyboard, and mouse
  
  

• Customer Intimacy
• Operational Excellence
• Innovation
  
  

• Strategic Agility and Thinking
• Impact and Influence
• Processes and Procedures
• Analytical Thinking
• Planning and organizing
• Problem Solving
• Relationship Building
  
  

• Inspect, test, and measure materials using gauges, calipers, and micrometers, as well as operate electronic inspection equipment to ensure that all necessary procedures and products are inspected to a high standard.
• Conduct visual and dimensional inspection to ensure parts, components, sub-assemblies and assemblies and the SRP meet the approved designs and specifications. Any deviations or non-conformances including proposed changes shall be communicated to the QC Manager.
• Maintain detailed testing records.
• Provide visual inspection and measurement confirmation for outgoing equipment assemblies, and maintain inspection records and reports.
• Ensure that all processes, procedures, specifications and applicable work instructions required for the quality control process are understood, followed and appropriate records are maintained.
• Maximize output and efficiency.
• Accurate maintenance of quality records.
• Develop and implement any required Quality Control plans.
• Ensure all incoming products, components, services, SRP and activities meet the specifications.
• Resolve issues that arise with MTR and other shipping documents.
• Assist with other purchasing/QC/document control duties as they arise.
• Suggest QMS documents improvements or revisions.
• Calibrate and maintain records of TMMDE calibration status.
• Approve final quality control documents such as product and SRP release.
• Review and approve supplier quality documentation including secondary process reports for coatings, heat treat, welding, carbide application, MTC, SQC and dimensional inspection reports.
• Generate and inputs NCRs into the NCR database for any discrepancies or Non-conformances with requirements, product components, services, SRP or activities that do not meet the engineering and/or order requirements.

• Experience and Skills: 5-10 years of Quality Control and inspection experience, preferably in the Oil and Gas industry downhole equipment manufacturing sector (international experience an asset).
• Experience and training in CNC machining and programming, use, and experience in CMM is an asset. Experience with QMS and applicable industry standard requirements such as ISO 9001, API Q1 and API Q2. Experience in continually improving the Quality Management System processes. Intermediate proficiency with Microsoft Office Suite (Excel, Word, Outlook). Knowledge of Packers Plus processes is an asset.
• Data-oriented with the ability to analyze data and draw conclusions. Knowledge of raw materials is an asset.
• Excellent oral and written communication skills.
• Based in the Kingdom of Saudi Arabia.

• Post-secondary education in Business Management or Engineering. Course work in Quality Control, or equivalent experience an asset.

• Position is Safety Sensitive and subject to a pre-employment medical assessment and drug and alcohol testing. Subject to post-incident and reasonable-cause drug and alcohol testing. Extended periods of standing at an inspection bench or table using TMMDE. Proficient use of a computer, monitor, keyboard, and mouse.
• Compliance with Packers Plus Health and Safety Program.

• Packers Plus Values: Customer Intimacy, Operational Excellence, Innovation.
• Role Competencies: Strategic Agility and Thinking, Impact and Influence, Processes and Procedures, Analytical Thinking, Planning and organizing, Problem Solving, Relationship Building.

Quality Control Inspector - Landscape Construction

The role: We are seeking a Quality Control Inspector with strong landscape construction experience to oversee day-to-day site inspections, ensuring compliance with drawings, specifications, and industry standards. You will be the on-site guardian of quality, verifying that both hardscape and softscape works meet client and regulatory requirements.

• Carry out daily inspections of landscape works: earthworks, hardscape (pavers, kerbs, stone, concrete), softscape (soil prep, planting, turf), irrigation, and drainage.
• Verify materials delivered to site (plants, soil, aggregates, pipes, valves, fittings) against approved submittals and standards.
• Witness and document testing and inspections as per ITPs and method statements.
• Monitor and record workmanship quality , identifying non-conformances and ensuring corrective actions are taken.
• Assist in maintaining inspection logs, checklists, photographs, and test reports for traceability.
• Support preparation of punch lists, NCRs, and close-out documentation.
• Liaise with site supervisors, subcontractors, and the QA/QC Engineer to resolve quality issues.
• Ensure works comply with project specifications, drawings, and HSE requirements .

• Bachelor's in Civil Engineering or Mechanical.
• 3-6 years' experience as a Quality Inspector or similar role in landscape construction/infrastructure projects .
• Knowledge of landscape standards for planting, soil preparation, irrigation systems, and hardscape finishes.
• Familiarity with ITPs, method statements, and NCR processes .
• Strong attention to detail and ability to enforce compliance on-site.
• Proficiency in MS Office ; knowledge of AutoCAD/inspection apps is an advantage.
• Strong communication and coordination skills with consultants and site teams.

• Associate

• Full-time

• Quality Assurance

• Construction