735 Quality Inspector jobs in Saudi Arabia

What you will enjoy doing

• Inline inspection :
• Conducts in-process inspection of the production line as per the Daily inspection plan (CAQ) and entering the inspection results in the CAQ.
• Verifying the effectiveness of line clearance and give green signal for production to start packing the goods.
• Prepares the daily inspection results in the CAQ.
• Update the line clearance checklist at the machine.
• Maintain the line clearance folder.
• Prepares the daily inspection results in the CAQ.
• Update the machine sample box of approved samples at the machine for each changeover (part of line clearance).
• Maintaining cleanliness and orderliness in their respective areas.
• Conduct additional inspections required.
• Following the SOPs as defined by supervisor and manager.

• Conducts product evaluation as per test procedure required by the product / specification and based on daily inspection Plan (CAQ), entering data in the CAQ (applicable for normal production also for AQP test samples).
• Responsible for putting the Quality hold or reject sticker on non-conforming products (if necessary) either from in-process inspection measurement checks or during spot checks in the warehouse & block them in ALPLA Stock.
• Maintain the in-house calibration for CMM & Magna mike
• Prepares the daily inspection results in the CAQ.
• Prepares the Certificate of Analysis.
• Monitor the temp. and humidity inside lab.
• Update the counter storage samples at samples cabinet (last run samples).
• Maintaining cleanliness and orderliness in their respective areas.

• Candidate must complete at least the higher diploma.

• Minimum 1-year experience as QC Inspector

• Knowledge in MS office (Excel, Word)
• Good in verbal and written English.

• High level of energy.
• Must be able to work on rotating shifts, call out, weekends and overtime (if required).
• Able to work in various weather and temperature conditions to include extreme heat, humidity and cold.
• It is required to act in a safe and environmentally responsible manner at all times by adhering to all ALPLA policies and procedures and Safety Standards.
• Fit to company culture in terms of punctuality, attitude, responsibility, department integration, personnel respect, strictness, accuracy and H&S standards.

• A modern, familiar and international working environment in a stable and continuously growing company.
• Be part of a young and dynamic team.
• Possibility of working independently in a defined area of responsibilities.

Overview

We Are PepsiCo

PepsiCo products are enjoyed by consumers more than one billion times a day in more than 200 countries and territories around the world. PepsiCo generated more than $79 billion in net revenue in 2021, driven by a complementary beverage and convenient foods portfolio that includes LAY’S ️, DORITOS ️, CHEETOS ️, GATORADE ️, PEPSI ️, QUAKER ️ and more. PepsiCo's product portfolio includes a wide range of enjoyable foods and beverages, including many iconic brands that generate more than $1 billion each in estimated annual retail sales.

Guiding PepsiCo is our vision to Be the Global Leader in Beverages and Convenient Foods by Winning with PepsiCo Positive (pep+). pep+ is our strategic end-to-end transformation that puts sustainability and human capital at the center of how we will create value and growth by operating within planetary boundaries and inspiring positive change for planet and people.

Our employees drive our culture. No two days are the same; we are dynamic and full of passionate teams that embrace new ideas through our collaborative spirit. At PepsiCo, we know that our company can only succeed when our associates and the society we serve flourishes. We are committed to fostering a diverse workforce by creating a collaborative, equitable and inclusive space where everyone, regardless of what we look like, where we come from or who we love, has a voice. At PepsiCo we create a Space to be y( )u.

Learn more about our culture and life at PepsiCo:

Join PepsiCo, dare to transform.

Job Purpose :

Support the implementation of the QFS Management System (MS) in the plant to ensure products compliance to specifications through continuous monitoring, testing and inspection to verify products specs and ensure adherence to QFS processes and liaise with stakeholders to take immediate actions whenever needed while at the same time support building of necessary competencies to all concerned parties to ensure proper understanding and implementation of the requirements so that QFS targets are achieved

PRINCIPAL ACCOUNTABILITIES

• Put the QFS Policy into implementation and assume all responsibilities assigned in the QFS MS
• Conduct inspections on the products quality versus specifications as per the inspection sheet and prepare related reports
• Monitor the adherence to food safety, Good Manufacturing Practices (GMPs) and hygiene requirements
• Conduct behavioral safety observations as assigned by plant QFS Manager
• Conduct online testing of quality parameters as per the online testing program requirements
• Note any deviations and communicate to the stakeholders and ensure proper course of action is immediately taking place including hold and release of any nonconforming product according to the Hold and release procedure
• Verify and validate undertaken actions to ensure their effectiveness in delivering required improvements
• Support the QFS training program as assigned by the plant QFS Manager
• Conduct Sanitation verification and Bio-trace as per sanitation procedure requirements
• Provide QFS advice/guidance/coaching to the plant team and identify common competency gaps to be addressed in the relevant training programs
• Support the QFS MS development and continuous improvements through active participation as assigned by the plant QFS Manager
• Recognize and embrace positive behaviours and practices.
• Ensuring calibrations of all QFS control equipment (metal detectors, primary and secondary weighers and check weighers, seal checkers, balances…etc.)
• Any other actions or responsibilities assigned by the direct manager that is in line and supports the job main purpose.

EXPERIENCE/COMPENTENCIES REQUIRED

• Experience of +3 years in similar position preferably in the same field
• Excellent command of both Arabic and English languages and literacy in computer usage.
• Self-starter able to work independently with a high degree of business savvy.
• Excellent communication and presenting skills and the ability to engage with and influence the behaviours of others internally and externally without direct reporting relationship
• Problem solving and strong analytical thinking (root-cause analysis, setting action plans…etc.)
• Bachelor degree in chemistry or food technology is prefered

• Visually and manually examining raw materials and finished goods, and using machines to test products
• Comparing objects to their intended physical specifications
• Looking for deviations from specifications or other issues
• Accepting or rejecting materials based on their quality, and returning products for rework
• Informing production supervisors of any required adjustments, and sharing inspection results with others
• Completing reports and logs, summarizing waste and rework, and entering data into a quality database

• Responsible for the quality of the parts made on their designated shift
• Maintain the highest quality work to continuously ensure customer satisfaction
• Assist in training of Press Operators
• Assures operators have read, understood, and signed DWI (Daily Work Instructions)
• Assures that obsolete instructions at workstations are removed
• Assures that operators are placing labels on boxes correctly
• Approve initial production parts after production start-up (Dimensional, aesthetic, , packaging, labeling, etc.)
• Ensure boundary sample(s) are made and are at the operator workstation and that operators are familiar with them
• Communicates and works with Process Technicians and Supervisors to ensure that high-quality parts are being produced
• Perform and document SPC data collection including charting
• Inspect randomly and if needed, 100%, product both on and off the line
• Perform and document gage R&R
• Travel to customer location and perform rework and sorting as needed
• Assist in gathering, documenting, and approving 1st piece/last piece

• Two-year degree with an emphasis in statistics, math, or science
• communicate effectively with colleagues and management, both verbally and in writing

Full-Time

IND1

Job Overview

The Quality Inspector applies their conceptual knowledge of inspection and, with a moderate level of guidance and direction from colleagues and leadership, is responsible for solving a range of straightforward inspection problems.

They will be responsible for analyzing possible solutions using standard procedures and building knowledge of the company, processes, and customers.

The Quality Inspector understands key business drivers and applies this knowledge to solve problems in straightforward situations by analyzing possible solutions using technical experience, judgment, and precedents.

• Determine product conformity to customer specifications through daily surveillances and ITP inspection points in accordance with the Project Quality Plan
• Identify non-conformity for rectification and ensure final resolution
• Appraise product quality to determine conformity and non-conformity in accordance with the approved drawings and inspection & Test Plan; All inspection results need to be documented, and if non-conformity exists, documentation shall be raised to establish corrective action
• Coordinate interface with Operations, Certifying Authority, Client, Job Sharing personnel, and subcontractor, assuring the conformity to project specifications
• Exercise a proactive approach to the prevention of a problem by interacting with Production, Engineers, and Management personnel
• Liaise with customer representatives, ensuring product conformity and stage release for each activity denoted within the Project Quality Plan / ITP

• High school diploma or degree in relevant field of study
• 5+ years of Quality Control or discipline-related experience with a degree and 8+ with a diploma
• Proficient in the use of computer and Microsoft programs

Responsibilities

• Conducts in-process inspection of the production line as per the Daily inspection plan (CAQ) and entering the inspection results in the CAQ.
• Verifying the effectiveness of line clearance and give green signal for production to start packing the goods.
• Prepares the daily inspection results in the CAQ.
• Update the line clearance checklist at the machine.
• Maintain the line clearance folder.
• Update the machine sample box of approved samples at the machine for each changeover (part of line clearance).
• Maintaining cleanliness and orderliness in their respective areas.
• Conduct additional inspections required.
• Following the SOPs as defined by supervisor and manager.

• Conducts product evaluation as per test procedure required by the product/specification and based on daily inspection Plan (CAQ), entering data in the CAQ (applicable for normal production also for AQP test samples).
• Responsible for putting the Quality hold or reject sticker on non-conforming products (if necessary) either from in-process inspection measurement checks or during spot checks in the warehouse & block them in ALPLA Stock.
• Maintain the in-house calibration for CMM & Magna mike
• Prepares the daily inspection results in the CAQ.
• Prepares the Certificate of Analysis.
• Monitor the temp. and humidity inside lab.
• Update the counter storage samples at samples cabinet (last run samples).
• Maintaining cleanliness and orderliness in their respective areas.

• Candidate must complete at least the higher diploma.

• Minimum 1-year experience as QC Inspector

• Knowledge in MS office (Excel, Word)
• Good in verbal and written English.

• High level of energy.
• Must be able to work on rotating shifts, call out, weekends and overtime (if required).
• Able to work in various weather and temperature conditions to include extreme heat, humidity and cold.
• It is required to act in a safe and environmentally responsible manner at all times by adhering to all ALPLA policies and procedures and Safety Standards.
• Fit to company culture in terms of punctuality, attitude, responsibility, department integration, personnel respect, strictness, accuracy and H&S standards.

• A modern, familiar and international working environment in a stable and continuously growing company.
• Be part of a young and dynamic team.
• Possibility of working independently in a defined area of responsibilities.

Overview

Internal Job Title: Quality Inspector
Business: Lucy Switchgear Arabia
Location: Dammam, Saudi Arabia
Job Reference No: 4229

• Test the products to the requirement of Quality control instructions (QCI)
• Stage inspection of assembly process.
• Keep a log of tested and inspected products.
• Work with all team working and drive continuous improvement initiatives and make suggestions for improvements.
• Manage and coordinate continuous improvement teams, project and initiatives.
• Follow all health and safety instructions and safe working procedures as per Lucy integrated management system (LIMS)

• The position is responsible to:
• Quality Manager.
• To test the units as per the Quality Control Instruction.
• Work with team and take continuous improvement initiatives and make suggestions for any improvements.

• Test the products to the requirement of Quality control instructions (QCI)
• Ensure that the test equipment’s in the calibration matrix are having proper identifications and are checked for due date of calibration before use.
• Ensure the output of product meets the planned production targets.
• Ensure that birth certificates are duly filled in and signed off by testing and manufacturing personnel
• Inspect the units with respect to BOM, if any discrepancy found with the product alerting engineer and concerned production supervisors.
• Ensure that the products offered for testing are tested and released without any delay.
• Ensure good house-keeping in the testing area
• Ensure that the test equipment’s are handled properly and cleaned regularly

Diploma in Electrical Engineering.

2 Years of hands-on experience in Switch gear testing.

Job-Specific Skills:

Knowledge in Electrical testing of switchgears,

Behavioural Competencies:

Good team player with good communication skill & ready to learn attitude.

Lucy Group Ltd is the parent company of all Lucy Group companies. Since its origins in Oxford, UK, over 200 years ago, the Group has grown and diversified. Today we employ in excess of 1,400 people worldwide, with operations in the UK, Saudi Arabia, UAE, India, South Africa, Brazil, Thailand, Malaysia, India and East Africa.

Lucy Electric is a global business that provides medium voltage switching and protection solutions for electrical distribution systems. Our dedication to cultivating our service provision allows Lucy Electric to offer a complete solutions package to our customers; facilitating the delivery of electricity to homes and businesses worldwide.

Does this sound interesting? We would love to hear from you. Our application process in quick and easy. Apply today!

Responsibilities

• Test the products to the requirement of Quality control instructions (QCI)
• Stage inspection of assembly process.
• Keep a log of tested and inspected products.
• Work with all team working and drive continuous improvement initiatives and make suggestions for improvements.
• Manage and coordinate continuous improvement teams, project and initiatives.
• Follow all health and safety instructions and safe working procedures as per Lucy integrated management system (LIMS)

The position is responsible to:

1. Quality Manager.
2. To test the units as per the Quality Control Instruction.
3. Work with team and take continuous improvement initiatives and make suggestions for any improvements.

• Test the products to the requirement of Quality control instructions (QCI)
• Ensure that the test equipment’s in the calibration matrix are having proper identifications and are checked for due date of calibration before use.
• Ensure the output of product meets the planned production targets.
• Ensure that birth certificates are duly filled in and signed off by testing and manufacturing personnel
• Inspect the units with respect to BOM, if any discrepancy found with the product alerting engineer and concerned production supervisors.
• Ensure that the products offered for testing are tested and released without any delay.
• Ensure good house-keeping in the testing area
• Ensure that the test equipment’s are handled properly and cleaned regularly

Diploma in Electrical Engineering.

2 Years of hands-on experience in Switch gear testing.

Job-Specific Skills:

Knowledge in Electrical testing of switchgears,

Good team player with good communication skill & ready to learn attitude.

Lucy Group Ltd is the parent company of all Lucy Group companies. Since its origins in Oxford, UK, over 200 years ago, the Group has grown and diversified. Today we employ in excess of 1,400 people worldwide, with operations in the UK, Saudi Arabia, UAE, India, South Africa, Brazil, Thailand, Malaysia, India and East Africa.

Lucy Electric is a global business that provides medium voltage switching and protection solutions for electrical distribution systems. Our dedication to cultivating our service provision allows Lucy Electric to offer a complete solutions package to our customers; facilitating the delivery of electricity to homes and businesses worldwide.

Does this sound interesting? We would love to hear from you. Our application process in quick and easy. Apply today!

Job summary

The Quality Inspector is responsible for conducting inspections and testing throughout the food manufacturing process. They ensure all food products meet internal quality specifications and external food safety standards. The inspector's work helps protect consumers from foodborne illnesses, maintains brand reputation, and prevents costly recalls.

Key responsibilities

• Raw materials inspection : Inspect and test incoming ingredients and packaging materials to ensure they meet quality and safety standards before entering the production line.
• In-process monitoring : Conduct checks during various stages of production to ensure manufacturing processes comply with established hygiene and quality protocols, such as Hazard Analysis and Critical Control Points (HACCP) and Good Manufacturing Practices (GMP).
• Finished product inspection : Perform final checks on products for attributes like appearance, color, taste, texture, and smell, as well as confirm correct labeling and packaging.
• Testing and analysis : Collect and submit food samples for laboratory analysis, including microbiological, chemical, and physical testing, to verify they meet quality and safety specifications.
• Documentation and reporting : Accurately complete and maintain all required quality control logs, inspection forms, and reports. Document any non-conformance issues or product defects.
• Issue resolution : Report any defects or problems to the quality assurance and production managers. Assist in investigating the root cause of quality lapses and implementing corrective and preventative actions.
• Facility and sanitation audits : Conduct regular audits of the production plant and equipment to ensure they meet hygiene and sanitation standards.
• Staff training : Assist in training production staff on food safety, hygiene practices, and quality control procedures.
• Regulatory compliance : Stay up-to-date on all relevant local, state, and federal food safety laws and regulations to ensure the company remains in compliance.

Required skills and qualifications

• Attention to detail : A meticulous and thorough approach to identifying even minor deviations from quality standards.
• Technical knowledge : A strong understanding of food safety regulations, including HACCP and GMP principles.
• Communication skills : Excellent verbal and written communication skills to report findings clearly to both management and production staff.
• Analytical and problem-solving skills : The ability to analyze data from inspections and testing to help identify the root cause of issues and propose solutions.
• Physical stamina : The ability to stand for long periods and, in some cases, lift or move materials.
• Relevant experience : Previous experience in a quality control or assurance role, preferably within a food manufacturing or processing environment.
• Education : Bachelor's certificate in Food Science, Biology, or a related field may be preferred for some positions.
• Certifications : Professional certifications such as HACCP are often beneficial.

Entry level

Full-time

Quality Assurance, Food and Beverage Manufacturing

We Are PepsiCo

PepsiCo products are enjoyed by consumers more than one billion times a day in more than 200 countries and territories around the world. PepsiCo generated more than $79 billion in net revenue in 2021, driven by a complementary beverage and convenient foods portfolio that includes LAY'S ️, DORITOS ️, CHEETOS ️, GATORADE ️, PEPSI ️, QUAKER ️ and more. PepsiCo's product portfolio includes a wide range of enjoyable foods and beverages, including many iconic brands that generate more than $1 billion each in estimated annual retail sales.

Guiding PepsiCo is our vision to Be the Global Leader in Beverages and Convenient Foods by Winning with PepsiCo Positive (pep+). pep+ is our strategic end-to-end transformation that puts sustainability and human capital at the center of how we will create value and growth by operating within planetary boundaries and inspiring positive change for planet and people.

Our employees drive our culture. No two days are the same; we are dynamic and full of passionate teams that embrace new ideas through our collaborative spirit. At PepsiCo, we know that our company can only succeed when our associates and the society we serve flourishes. We are committed to fostering a diverse workforce by creating a collaborative, equitable and inclusive space where everyone, regardless of what we look like, where we come from or who we love, has a voice. At PepsiCo we create a Space to be y( )u.

Learn more about our culture and life at PepsiCo:

Join PepsiCo, dare to transform.

Job Purpose :

Support the implementation of the QFS Management System (MS) in the plant to ensure products compliance to specifications through continuous monitoring, testing and inspection to verify products specs and ensure adherence to QFS processes and liaise with stakeholders to take immediate actions whenever needed while at the same time support building of necessary competencies to all concerned parties to ensure proper understanding and implementation of the requirements so that QFS targets are achieved

PRINCIPAL ACCOUNTABILITIES

• Put the QFS Policy into implementation and assume all responsibilities assigned in the QFS MS
• Conduct inspections on the products quality versus specifications as per the inspection sheet and prepare related reports
• Monitor the adherence to food safety, Good Manufacturing Practices (GMPs) and hygiene requirements
• Conduct behavioral safety observations as assigned by plant QFS Manager
• Conduct online testing of quality parameters as per the online testing program requirements
• Note any deviations and communicate to the stakeholders and ensure proper course of action is immediately taking place including hold and release of any nonconforming product according to the Hold and release procedure
• Verify and validate undertaken actions to ensure their effectiveness in delivering required improvements
• Support the QFS training program as assigned by the plant QFS Manager
• Conduct Sanitation verification and Bio-trace as per sanitation procedure requirements
• Provide QFS advice/guidance/coaching to the plant team and identify common competency gaps to be addressed in the relevant training programs
• Support the QFS MS development and continuous improvements through active participation as assigned by the plant QFS Manager
• Recognize and embrace positive behaviours and practices.
• Ensuring calibrations of all QFS control equipment (metal detectors, primary and secondary weighers and check weighers, seal checkers, balances etc.)
• Any other actions or responsibilities assigned by the direct manager that is in line and supports the job main purpose.

EXPERIENCE/COMPENTENCIES REQUIRED

• Experience of +3 years in similar position preferably in the same field
• Excellent command of both Arabic and English languages and literacy in computer usage.
• Self-starter able to work independently with a high degree of business savvy.
• Excellent communication and presenting skills and the ability to engage with and influence the behaviours of others internally and externally without direct reporting relationship
• Problem solving and strong analytical thinking (root-cause analysis, setting action plans etc.)
• Bachelor degree in chemistry or food technology is prefered