6 Layout Engineer jobs in Saudi Arabia

Job Overview:

The Principal Piping Layout Engineer is responsible for interpreting internal or external business issues and recommending best practices. They will be tasked with solving complex Piping-related problems and will work independently with minimal guidance. The Principal Piping Engineer may be responsible for leading functional teams or projects and is regarded as a specialist in the field of Piping. As such, they must have in-depth expertise in Piping as well as broad knowledge of the Piping discipline within the Engineering function. The candidate must have offshore experience with clients in GCC.

Key Tasks and Responsibilities:

• Perform conceptual, FEED, or detailed design analysis and develop them as per project Scope of Work design basis, project documentation, design codes and standards, and McDermott procedures within the planned schedule and budget
• Apply in-depth skills and broad knowledge of the business to address complex problems and non-standard situations and report them to the Project Management Team and Department Manager at an early stage
• Prepare detailed design calculations and analyses including design reports and procedures
• Manage own time to meet objectives and forecast and plan resource requirements
• Lead others to solve complex problems, use sophisticated analytical thought to exercise judgment, and identify innovative solutions
• Interpret internal/external business challenges and recommend best practices to improve technology, processes, or services
• Explain difficult concepts and negotiate with others to adopt a different point of view
• Focused on health and safety policies and procedures
• When acting as Lead engineer:
• Direct medium or large Engineering and Design team as a Lead Engineer
• Lead the Discipline engineering design of the assigned work area and complete within the planned schedule and budget, in accordance with standards, MDR, and project-specific procedures and to a high professional standard
• Plan, organize, and direct all aspects of discipline execution of the assigned project including scope, deliverables, schedule, and manpower resources
• Ensure interfaces and deliverables are clearly identified
• Maintain responsibility for progress and productivity, identifying any required corrective action
• Act as project representative for the discipline during meetings with the project team, Client, and relevant agencies such as certifying authorities, auditors, third parties, etc.
• Become fully familiar with the project SoW, Specification, Schedule, and all inter-discipline requirements
• Interface with other departments to obtain input for engineering and design
• Interface with High-Value Centers (HVECs) ensuring a clear understanding of their SoW
• Prepare Iso Curve based on required input in line with Project Level 3 Schedule
• When acting as Lead Engineer or area Lead:
• Review the Piping budget, and provide Piping input for the Project Execution Plan
• Plan, organize, and assign tasks, responsibilities, and man-hour budgets to piping sub-discipline and verify tasks are completed within budgets
• Support 3D-Model review at 30%, 60% & 90% progress
• Provide Piping Discipline input into Plan Level 2, 3, and 4 schedules and review the dependencies
• Prepare discipline forecasts identifying changes to scope and promptly raising a notification
• Alert the team of any deviation from the Scope of work or a need for a change order
• Provide piping man-hours, schedule, and deliverables list including Piping Discipline Execution Plan
• Check and approve design philosophies, specifications, pipe supports, standard detail drawings, MTO, and material requisitions in accordance with the project scope of work and contract
• Monitor KPI measurement results and take corrective action
• Lead Piping Discipline during project internal or External Audits
• Assist the Department Manager in the Performance Evaluation of Piping team members
• Support proposals and studies
  
  

Reports to:

Project: Lead Engineer, Project Engineer or Project Manager

Functional: Department Manager

Liaise With: Designers and Engineers, other Engineering disciplines Leads, Construction & Fabrication Group,

Project Management Team, Document Control, Project Cost Control and Planning Group, Procurement Group,

Subcontractors and Vendors, Client

Supervises: Piping Engineering and Layout Team

Essential Qualifications and Education:

• Bachelor's Degree or Master's Degree in Mechanical Engineering
• 15-20 years of experience as a Piping Engineer in Oil and gas with a major contractor performing Conceptual, Pre-FEED, FEED, and detail design
• Previous experience as Lead Piping Engineer on FEED and EPC projects via Multi-offices Project Execution
• Detailed knowledge of Pre-FEED, FEED, and Detailed Design Phases Projects
• Detailed knowledge and experience of design techniques and application of standards, codes, and guidelines
• Familiar with all Piping Sub-Disciplines including Design and Modelling, Pipe Stress & Support, Piping Material Engineering, and MTO activities and deliverables
• Knowledgeable in project coordination and execution skills
• Conversant with international codes and standards like ANSI, ASME, API, BS, NFPA, etc.
• Familiar with SP3D / E3D / Navisworks
• Familiar with stick-built and modularization approach
• Preferably Registered Professional Engineer or member of a professional engineering society
• Familiar with commercial aspects of projects and types of contracts
• Committed to McDermott values
  
  

Flexible for Business travel

Job Id: Za5TjzRf0WUMRI0B/TU9jxuI4ICJN5XoxwYItSDaa2+nYY5uM+kRYIvy2OKA2YBj+l9kryk1HF6X6W5LyvH5KAJIeT5GwnJ6MdVNWgVZbdArjyq9+igJsolSKYn33wJL5+xM/2ImtGdtqlqEFgKCptXl24jzbbn/MI78Ch643OO/0Kdkww==

#J-18808-Ljbffr

Job Overview:

The Principal Piping Layout Engineer is responsible for interpreting internal or external business issues and recommending best practices. They will be tasked with solving complex Piping-related problems and will work independently with minimal guidance. The Principal Piping Engineer may be responsible for leading functional teams or projects and is regarded as a specialist in the field of Piping. As such, they must have in-depth expertise in Piping as well as broad knowledge of the Piping discipline within the Engineering function. The candidate must have offshore experience with clients in GCC.

Qualifications

Essential Qualifications and Education:

• Bachelor's Degree or Master's Degree in Mechanical Engineering
• 15-20 years of experience as a Piping Engineer in Oil and gas with a major contractor performing Conceptual, Pre-FEED, FEED, and detail design
• Previous experience as Lead Piping Engineer on FEED and EPC projects via Multi-offices Project Execution
• Detailed knowledge of Pre-FEED, FEED, and Detailed Design Phases Projects
• Detailed knowledge and experience of design techniques and application of standards, codes, and guidelines
• Familiar with all Piping Sub-Disciplines including Design and Modelling, Pipe Stress & Support, Piping Material Engineering, and MTO activities and deliverables
• Knowledgeable in project coordination and execution skills
• Conversant with international codes and standards like ANSI, ASME, API, BS, NFPA, etc.
• Familiar with SP3D / E3D / Navisworks
• Familiar with stick-built and modularization approach
• Preferably Registered Professional Engineer or member of a professional engineering society
• Familiar with commercial aspects of projects and types of contracts
• Committed to McDermott values
• Flexible for Business travel

#LI-MW2

Responsibilities

Key Tasks and Responsibilities:

• Perform conceptual, FEED, or detailed design analysis and develop them as per project Scope of Work design basis, project documentation, design codes and standards, and McDermott procedures within the planned schedule and budget
• Apply in-depth skills and broad knowledge of the business to address complex problems and non-standard situations and report them to the Project Management Team and Department Manager at an early stage
• Prepare detailed design calculations and analyses including design reports and procedures
• Manage own time to meet objectives and forecast and plan resource requirements
• Lead others to solve complex problems, use sophisticated analytical thought to exercise judgment, and identify innovative solutions
• Interpret internal/external business challenges and recommend best practices to improve technology, processes, or services
• Explain difficult concepts and negotiate with others to adopt a different point of view
• Focused on health and safety policies and procedures
• When acting as Lead engineer:
  • Direct medium or large Engineering and Design team as a Lead Engineer
  • Lead the Discipline engineering design of the assigned work area and complete within the planned schedule and budget, in accordance with standards, MDR, and project-specific procedures and to a high professional standard
  • Plan, organize, and direct all aspects of discipline execution of the assigned project including scope, deliverables, schedule, and manpower resources
  • Ensure interfaces and deliverables are clearly identified
  • Maintain responsibility for progress and productivity, identifying any required corrective action
  • Act as project representative for the discipline during meetings with the project team, Client, and relevant agencies such as certifying authorities, auditors, third parties, etc.
• Become fully familiar with the project SoW, Specification, Schedule, and all inter-discipline requirements
• Interface with other departments to obtain input for engineering and design
• Interface with High-Value Centers (HVECs) ensuring a clear understanding of their SoW
• Prepare Iso Curve based on required input in line with Project Level 3 Schedule
• When acting as Lead Engineer or area Lead:
  • Review the Piping budget, and provide Piping input for the Project Execution Plan
  • Plan, organize, and assign tasks, responsibilities, and man-hour budgets to piping sub-discipline and verify tasks are completed within budgets
  • Support 3D-Model review at 30%, 60% & 90% progress
  • Provide Piping Discipline input into Plan Level 2, 3, and 4 schedules and review the dependencies
  • Prepare discipline forecasts identifying changes to scope and promptly raising a notification
  • Alert the team of any deviation from the Scope of work or a need for a change order
  • Provide piping man-hours, schedule, and deliverables list including Piping Discipline Execution Plan
  • Check and approve design philosophies, specifications, pipe supports, standard detail drawings, MTO, and material requisitions in accordance with the project scope of work and contract
  • Monitor KPI measurement results and take corrective action
  • Lead Piping Discipline during project internal or External Audits
• Assist the Department Manager in the Performance Evaluation of Piping team members
• Support proposals and studies

Reports to:
Project: Lead Engineer, Project Engineer or Project Manager
Functional: Department Manager
Liaise With: Designers and Engineers, other Engineering disciplines Leads, Construction & Fabrication Group,
Project Management Team, Document Control, Project Cost Control and Planning Group, Procurement Group,
Subcontractors and Vendors, Client
Supervises: Piping Engineering and Layout Team

#J-18808-Ljbffr

Join to apply for the Principal Piping Layout Engineer role at McDermott International, Ltd

Join to apply for the Principal Piping Layout Engineer role at McDermott International, Ltd

Job Overview:

The Principal Piping Layout Engineer is responsible for interpreting internal or external business issues and recommending best practices. They will be tasked with solving complex Piping-related problems and will work independently with minimal guidance. The Principal Piping Engineer may be responsible for leading functional teams or projects and is regarded as a specialist in the field of Piping. As such, they must have in-depth expertise in Piping as well as broad knowledge of the Piping discipline within the Engineering function. The candidate must have offshore experience with clients in GCC.

Job Description

Job Overview:

The Principal Piping Layout Engineer is responsible for interpreting internal or external business issues and recommending best practices. They will be tasked with solving complex Piping-related problems and will work independently with minimal guidance. The Principal Piping Engineer may be responsible for leading functional teams or projects and is regarded as a specialist in the field of Piping. As such, they must have in-depth expertise in Piping as well as broad knowledge of the Piping discipline within the Engineering function. The candidate must have offshore experience with clients in GCC.

Responsibilities

Key Tasks and Responsibilities:

• Perform conceptual, FEED, or detailed design analysis and develop them as per project Scope of Work design basis, project documentation, design codes and standards, and McDermott procedures within the planned schedule and budget
• Apply in-depth skills and broad knowledge of the business to address complex problems and non-standard situations and report them to the Project Management Team and Department Manager at an early stage
• Prepare detailed design calculations and analyses including design reports and procedures
• Manage own time to meet objectives and forecast and plan resource requirements
• Lead others to solve complex problems, use sophisticated analytical thought to exercise judgment, and identify innovative solutions
• Interpret internal/external business challenges and recommend best practices to improve technology, processes, or services
• Explain difficult concepts and negotiate with others to adopt a different point of view
• Focused on health and safety policies and procedures
• When acting as Lead engineer:
• Direct medium or large Engineering and Design team as a Lead Engineer
• Lead the Discipline engineering design of the assigned work area and complete within the planned schedule and budget, in accordance with standards, MDR, and project-specific procedures and to a high professional standard
• Plan, organize, and direct all aspects of discipline execution of the assigned project including scope, deliverables, schedule, and manpower resources
• Ensure interfaces and deliverables are clearly identified
• Maintain responsibility for progress and productivity, identifying any required corrective action
• Act as project representative for the discipline during meetings with the project team, Client, and relevant agencies such as certifying authorities, auditors, third parties, etc.
• Become fully familiar with the project SoW, Specification, Schedule, and all inter-discipline requirements
• Interface with other departments to obtain input for engineering and design
• Interface with High-Value Centers (HVECs) ensuring a clear understanding of their SoW
• Prepare Iso Curve based on required input in line with Project Level 3 Schedule
• When acting as Lead Engineer or area Lead:
• Review the Piping budget, and provide Piping input for the Project Execution Plan
• Plan, organize, and assign tasks, responsibilities, and man-hour budgets to piping sub-discipline and verify tasks are completed within budgets
• Support 3D-Model review at 30%, 60% & 90% progress
• Provide Piping Discipline input into Plan Level 2, 3, and 4 schedules and review the dependencies
• Prepare discipline forecasts identifying changes to scope and promptly raising a notification
• Alert the team of any deviation from the Scope of work or a need for a change order
• Provide piping man-hours, schedule, and deliverables list including Piping Discipline Execution Plan
• Check and approve design philosophies, specifications, pipe supports, standard detail drawings, MTO, and material requisitions in accordance with the project scope of work and contract
• Monitor KPI measurement results and take corrective action
• Lead Piping Discipline during project internal or External Audits
• Assist the Department Manager in the Performance Evaluation of Piping team members
• Support proposals and studies
  
  

Reports to:

Project: Lead Engineer, Project Engineer or Project Manager

Functional: Department Manager

Liaise With: Designers and Engineers, other Engineering disciplines Leads, Construction & Fabrication Group,

Project Management Team, Document Control, Project Cost Control and Planning Group, Procurement Group,

Subcontractors and Vendors, Client

Supervises: Piping Engineering and Layout Team

Qualifications

Essential Qualifications and Education:

• Bachelor's Degree or Master's Degree in Mechanical Engineering
• 15-20 years of experience as a Piping Engineer in Oil and gas with a major contractor performing Conceptual, Pre-FEED, FEED, and detail design
• Previous experience as Lead Piping Engineer on FEED and EPC projects via Multi-offices Project Execution
• Detailed knowledge of Pre-FEED, FEED, and Detailed Design Phases Projects
• Detailed knowledge and experience of design techniques and application of standards, codes, and guidelines
• Familiar with all Piping Sub-Disciplines including Design and Modelling, Pipe Stress & Support, Piping Material Engineering, and MTO activities and deliverables
• Knowledgeable in project coordination and execution skills
• Conversant with international codes and standards like ANSI, ASME, API, BS, NFPA, etc.
• Familiar with SP3D / E3D / Navisworks
• Familiar with stick-built and modularization approach
• Preferably Registered Professional Engineer or member of a professional engineering society
• Familiar with commercial aspects of projects and types of contracts
• Committed to McDermott values
• Flexible for Business travel

Seniority level

• Seniority level Mid-Senior level

Employment type

• Employment type Full-time

Job function

• Job function Engineering and Information Technology
• Industries Engineering Services and Oil and Gas

Referrals increase your chances of interviewing at McDermott International, Ltd by 2x

Sign in to set job alerts for “Layout Engineer” roles.

Al Corniche, Eastern, Saudi Arabia 2 weeks ago

OT Cybersecurity Design Engineer - Great Opportunity for Saudi Nationals

Manama, Capital Governorate, Bahrain 2 months ago

We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.

#J-18808-Ljbffr

Join to apply for the Principal Piping Layout Engineer role at Burjline Builders

2 days ago Be among the first 25 applicants

Join to apply for the Principal Piping Layout Engineer role at Burjline Builders

Get AI-powered advice on this job and more exclusive features.

Job Overview:

The Principal Piping Layout Engineer is responsible for interpreting internal or external business issues and recommending best practices. They will be tasked with solving complex Piping-related problems and will work independently with minimal guidance. The Principal Piping Engineer may be responsible for leading functional teams or projects and is regarded as a specialist in the field of Piping. As such, they must have in-depth expertise in Piping as well as broad knowledge of the Piping discipline within the Engineering function. The candidate must have offshore experience with clients in GCC.

Job Overview:

The Principal Piping Layout Engineer is responsible for interpreting internal or external business issues and recommending best practices. They will be tasked with solving complex Piping-related problems and will work independently with minimal guidance. The Principal Piping Engineer may be responsible for leading functional teams or projects and is regarded as a specialist in the field of Piping. As such, they must have in-depth expertise in Piping as well as broad knowledge of the Piping discipline within the Engineering function. The candidate must have offshore experience with clients in GCC.

Key Tasks and Responsibilities:

• Perform conceptual, FEED, or detailed design analysis and develop them as per project Scope of Work design basis, project documentation, design codes and standards, and McDermott procedures within the planned schedule and budget
• Apply in-depth skills and broad knowledge of the business to address complex problems and non-standard situations and report them to the Project Management Team and Department Manager at an early stage
• Prepare detailed design calculations and analyses including design reports and procedures
• Manage own time to meet objectives and forecast and plan resource requirements
• Lead others to solve complex problems, use sophisticated analytical thought to exercise judgment, and identify innovative solutions
• Interpret internal/external business challenges and recommend best practices to improve technology, processes, or services
• Explain difficult concepts and negotiate with others to adopt a different point of view
• Focused on health and safety policies and procedures
• When acting as Lead engineer:
• Direct medium or large Engineering and Design team as a Lead Engineer
• Lead the Discipline engineering design of the assigned work area and complete within the planned schedule and budget, in accordance with standards, MDR, and project-specific procedures and to a high professional standard
• Plan, organize, and direct all aspects of discipline execution of the assigned project including scope, deliverables, schedule, and manpower resources
• Ensure interfaces and deliverables are clearly identified
• Maintain responsibility for progress and productivity, identifying any required corrective action
• Act as project representative for the discipline during meetings with the project team, Client, and relevant agencies such as certifying authorities, auditors, third parties, etc.
• Become fully familiar with the project SoW, Specification, Schedule, and all inter-discipline requirements
• Interface with other departments to obtain input for engineering and design
• Interface with High-Value Centers (HVECs) ensuring a clear understanding of their SoW
• Prepare Iso Curve based on required input in line with Project Level 3 Schedule
• When acting as Lead Engineer or area Lead:
• Review the Piping budget, and provide Piping input for the Project Execution Plan
• Plan, organize, and assign tasks, responsibilities, and man-hour budgets to piping sub-discipline and verify tasks are completed within budgets
• Support 3D-Model review at 30%, 60% & 90% progress
• Provide Piping Discipline input into Plan Level 2, 3, and 4 schedules and review the dependencies
• Prepare discipline forecasts identifying changes to scope and promptly raising a notification
• Alert the team of any deviation from the Scope of work or a need for a change order
• Provide piping man-hours, schedule, and deliverables list including Piping Discipline Execution Plan
• Check and approve design philosophies, specifications, pipe supports, standard detail drawings, MTO, and material requisitions in accordance with the project scope of work and contract
• Monitor KPI measurement results and take corrective action
• Lead Piping Discipline during project internal or External Audits
• Assist the Department Manager in the Performance Evaluation of Piping team members
• Support proposals and studies
  
  

Reports to:

Project: Lead Engineer, Project Engineer or Project Manager

Functional: Department Manager

Liaise With: Designers and Engineers, other Engineering disciplines Leads, Construction & Fabrication Group,

Project Management Team, Document Control, Project Cost Control and Planning Group, Procurement Group,

Subcontractors and Vendors, Client

Supervises: Piping Engineering and Layout Team

Essential Qualifications and Education:

• Bachelor's Degree or Master's Degree in Mechanical Engineering
• 15-20 years of experience as a Piping Engineer in Oil and gas with a major contractor performing Conceptual, Pre-FEED, FEED, and detail design
• Previous experience as Lead Piping Engineer on FEED and EPC projects via Multi-offices Project Execution
• Detailed knowledge of Pre-FEED, FEED, and Detailed Design Phases Projects
• Detailed knowledge and experience of design techniques and application of standards, codes, and guidelines
• Familiar with all Piping Sub-Disciplines including Design and Modelling, Pipe Stress & Support, Piping Material Engineering, and MTO activities and deliverables
• Knowledgeable in project coordination and execution skills
• Conversant with international codes and standards like ANSI, ASME, API, BS, NFPA, etc.
• Familiar with SP3D / E3D / Navisworks
• Familiar with stick-built and modularization approach
• Preferably Registered Professional Engineer or member of a professional engineering society
• Familiar with commercial aspects of projects and types of contracts
• Committed to McDermott values
  
  

Flexible for Business travel

Job Id: Za5TjzRf0WUMRI0B/TU9jxuI4ICJN5XoxwYItSDaa2+nYY5uM+kRYIvy2OKA2YBj+l9kryk1HF6X6W5LyvH5KAJIeT5GwnJ6MdVNWgVZbdArjyq9+igJsolSKYn33wJL5+xM/2ImtGdtqlqEFgKCptXl24jzbbn/MI78Ch643OO/0Kdkww

Seniority level

• Seniority level Director

Employment type

• Employment type Full-time

Job function

• Job function Engineering and Information Technology
• Industries Construction

Referrals increase your chances of interviewing at Burjline Builders by 2x

We're unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.

**Job Overview:**
The Principal Piping Layout Engineer is responsible for interpreting internal or external business issues and recommending best practices. They will be tasked with solving complex Piping-related problems and will work independently with minimal guidance. The Principal Piping Engineer may be responsible for leading functional teams or projects and is regarded as a specialist in the field of Piping. As such, they must have in-depth expertise in Piping as well as broad knowledge of the Piping discipline within the Engineering function. The candidate must have offshore experience with clients in GCC.
**Key Tasks and Responsibilities:**
+ Perform conceptual, FEED, or detailed design analysis and develop them as per project Scope of Work design basis, project documentation, design codes and standards, and McDermott procedures within the planned schedule and budget
+ Apply in-depth skills and broad knowledge of the business to address complex problems and non-standard situations and report them to the Project Management Team and Department Manager at an early stage
+ Prepare detailed design calculations and analyses including design reports and procedures
+ Manage own time to meet objectives and forecast and plan resource requirements
+ Lead others to solve complex problems, use sophisticated analytical thought to exercise judgment, and identify innovative solutions
+ Interpret internal/external business challenges and recommend best practices to improve technology, processes, or services
+ Explain difficult concepts and negotiate with others to adopt a different point of view
+ Focused on health and safety policies and procedures
+ When acting as Lead engineer:
+ Direct medium or large Engineering and Design team as a Lead Engineer
+ Lead the Discipline engineering design of the assigned work area and complete within the planned schedule and budget, in accordance with standards, MDR, and project-specific procedures and to a high professional standard
+ Plan, organize, and direct all aspects of discipline execution of the assigned project including scope, deliverables, schedule, and manpower resources
+ Ensure interfaces and deliverables are clearly identified
+ Maintain responsibility for progress and productivity, identifying any required corrective action
+ Act as project representative for the discipline during meetings with the project team, Client, and relevant agencies such as certifying authorities, auditors, third parties, etc.
+ Become fully familiar with the project SoW, Specification, Schedule, and all inter-discipline requirements
+ Interface with other departments to obtain input for engineering and design
+ Interface with High-Value Centers (HVECs) ensuring a clear understanding of their SoW
+ Prepare Iso Curve based on required input in line with Project Level 3 Schedule
+ When acting as Lead Engineer or area Lead:
+ Review the Piping budget, and provide Piping input for the Project Execution Plan
+ Plan, organize, and assign tasks, responsibilities, and man-hour budgets to piping sub-discipline and verify tasks are completed within budgets
+ Support 3D-Model review at 30%, 60% & 90% progress
+ Provide Piping Discipline input into Plan Level 2, 3, and 4 schedules and review the dependencies
+ Prepare discipline forecasts identifying changes to scope and promptly raising a notification
+ Alert the team of any deviation from the Scope of work or a need for a change order
+ Provide piping man-hours, schedule, and deliverables list including Piping Discipline Execution Plan
+ Check and approve design philosophies, specifications, pipe supports, standard detail drawings, MTO, and material requisitions in accordance with the project scope of work and contract
+ Monitor KPI measurement results and take corrective action
+ Lead Piping Discipline during project internal or External Audits
+ Assist the Department Manager in the Performance Evaluation of Piping team members
+ Support proposals and studies
Reports to:
Project: Lead Engineer, Project Engineer or Project Manager
Functional: Department Manager
Liaise With: Designers and Engineers, other Engineering disciplines Leads, Construction & Fabrication Group,
Project Management Team, Document Control, Project Cost Control and Planning Group, Procurement Group,
Subcontractors and Vendors, Client
Supervises: Piping Engineering and Layout Team
**Essential Qualifications and Education:**
+ Bachelor's Degree or Master's Degree in Mechanical Engineering
+ 15-20 years of experience as a Piping Engineer in Oil and gas with a major contractor performing Conceptual, Pre-FEED, FEED, and detail design
+ Previous experience as Lead Piping Engineer on FEED and EPC projects via Multi-offices Project Execution
+ Detailed knowledge of Pre-FEED, FEED, and Detailed Design Phases Projects
+ Detailed knowledge and experience of design techniques and application of standards, codes, and guidelines
+ Familiar with all Piping Sub-Disciplines including Design and Modelling, Pipe Stress & Support, Piping Material Engineering, and MTO activities and deliverables
+ Knowledgeable in project coordination and execution skills
+ Conversant with international codes and standards like ANSI, ASME, API, BS, NFPA, etc.
+ Familiar with SP3D / E3D / Navisworks
+ Familiar with stick-built and modularization approach
+ Preferably Registered Professional Engineer or member of a professional engineering society
+ Familiar with commercial aspects of projects and types of contracts
+ Committed to McDermott values
+ Flexible for Business travel
#LI-MW2
McDermott is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, genetic information, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law.