599 Independent Testing jobs in Saudi Arabia

Direct message the job poster from Confidential

Job purpose:

To assess and test items, systems or products against defined user, system and other specifications towards confirming performance compliance.

Define and Compile test specifications in relation to the product specification.

Plan, execute and prepare reports on product tests, including field tests as may be required.

Key Responsibilities:

• Develop and compile Test and Evaluation Management Plans (TEMP) and instructions, deducted from system and other specifications as applicable.
• Plan and budget tests, evaluations and field trials as required.
• Prepare hardware in terms of Unit Under Test (UUT) as well as test equipment (TE) required to execute the test.
• Ensure measurement equipment are calibrated prior to test execution.
• Conduct pre-test meetings towards aligning of test procedures, expectations and roles and responsibilities of team members.
• Coordinate and execute tests and evaluations according to plans in collaboration with team members as applicable.
• Perform data analysis and interpretation on measured data using software and processing techniques as applicable.
• Compile and maintain test reports and records, archived in the configuration management system. (Product Data Management (PDM))
• Ensuring tests and results are accurate, repeatable, qualified and proven.
• Participate in the redlining of product definitions, capturing improvements after test execution.
• Manage and maintain test facilities and equipment.
• Participate in HSE program and conduct tests making sure that good HSE practices are being observed.

Requirements of role:

• Mechanical/Electro-mechanical/Electrical Degree or Diploma qualification.
• Working knowledge of applicable performance standards with the ability to study and compile test plans and procedures according to experience and best practices.
• Have a good understanding of the systems engineering concepts and interrelationships of processes.
• Have a deep understanding of test and evaluation processes, techniques and execution.
• Ability to utilize equipment in order to perform accurate and repeatable simulations and analysis.
• Knowledge and experience in data analysis techniques and verification of data integrity.
• Project management capabilities towards fulfillment of test objectives at affordable costs.
• Minimum of 7 years’ experience in Test and Evaluation execution, with at least 3 years in a military context.

• Mid-Senior level

• Full-time

• Engineering and Information Technology

• Military and International Affairs, Defense and Space Manufacturing, and Repair and Maintenance

Overview

Dear Connection,

We are Hiring in Saudi Arabia

Position – CCTV Testing Engineer

Job Location - Dammam

• Perform testing, inspection, and commissioning of CCTV systems, including IP and analog cameras, DVR/NVR units, and video management software.
• Conduct functional tests for video quality, camera positioning, and system configurations.
• Troubleshoot and resolve hardware, software, and network-related issues in CCTV installations.
• Verify cable connections, power supply, and network setup for each camera and recording device.
• Collaborate with installation teams to ensure proper integration of CCTV with access control, alarm, and other security systems.
• Carry out FAT (Factory Acceptance Tests) and SAT (Site Acceptance Tests) as per project requirements.
• Maintain accurate documentation of test results, system configurations, and issues encountered.
• Ensure all work is performed according to safety standards and compliance guidelines.
• Stay updated on the latest CCTV technologies, IP networking protocols, and security system trends.

• Diploma or bachelor’s degree in electrical, Electronics, or Telecommunication Engineering (or related field).
• Hands-on experience in CCTV testing and commissioning (2–5 years preferred).
• Strong knowledge of IP/analog CCTV systems, DVR/NVR setup, and VMS platforms.
• Understanding network protocols (TCP/IP, DHCP, PoE) and video compression formats (H.264/H.265).
• Ability to read wiring diagrams, schematics, and technical manuals.
• Strong troubleshooting and problem-solving skills.
• Good communication and teamwork skills.
• Preferred: CCTV or security systems certifications (e.g., Hikvision, Dahua, Axis).
• Apply: Send Your Resume To Us:

Leverage your abilities and join a leading engineering and contracting company in Saudi Arabia, specializing in delivering complex power, infrastructure, and industrial projects. With a proven track record across large-scale developments, the company continues to expand its footprint by providing reliable, high-quality engineering solutions to clients across the Kingdom.

Work Location: Jeddah, Saudi Arabia

As an
Electrical Testing & Commissioning Engineer
, you ensure electrical systems are tested, commissioned, and delivered to meet project specifications, safety standards, and client requirements, while coordinating with teams for smooth handover.

Key Accountabilities

• Plan, execute, and supervise testing and commissioning activities for electrical systems, including HV/EHV switchgear, transformers, protection relays, generators, and SCADA systems.
• Review project specifications, drawings, and standards to ensure compliance during commissioning stages.
• Conduct functional, performance, and safety tests on installed electrical equipment.
• Troubleshoot and resolve technical issues arising during testing and commissioning.
• Prepare detailed test reports, documentation, and as-built records for client submission.

Knowledge, Skills, and Experience

• Bachelor's degree in Electrical Engineering or a related field.
• 5–7 years of experience in testing and commissioning of electrical systems within power, utility, or infrastructure projects.
• Hands-on experience with protection relays, substation equipment, and power distribution systems.
• Strong knowledge of international standards and Saudi Electricity Company (SEC) requirements.

Job purpose:

To assess and test items, systems or products against defined user, system and other specifications towards confirming performance compliance.

Define and Compile test specifications in relation to the product specification.

Plan, execute and prepare reports on product tests, including field tests as may be required.

Key Responsibilities:

1. Develop and compile Test and Evaluation Management Plans (TEMP) and instructions, deducted from system and other specifications as applicable.
2. Plan and budget tests, evaluations and field trials as required.
3. Prepare hardware in terms of Unit Under Test (UUT) as well as test equipment (TE) required to execute the test.
4. Ensure measurement equipment are calibrated prior to test execution.
5. Conduct pre-test meetings towards aligning of test procedures, expectations and roles and responsibilities of team members.
6. Coordinate and execute tests and evaluations according to plans in collaboration with team members as applicable.
7. Perform data analysis and interpretation on measured data using software and processing techniques as applicable.
8. Compile and maintain test reports and records, archived in the configuration management system. (Product Data Management (PDM))
9. Ensuring tests and results are accurate, repeatable, qualified and proven.
10. Participate in the redlining of product definitions, capturing improvements after test execution.
11. Maintain best practices w.r.t. change management in engineering processes. (Configuration management etc.)
12. Manage and maintain test facilities and equipment.
13. Participate in HSE program and conduct tests making sure that good HSE practices are being observed.

requirements of role:

• Mechanical/Electro-mechanical/Electrical Degree or Diploma qualification.
• Working knowledge of applicable performance standards with the ability to study and compile test plans and procedures according to experience and best practices.
• Have a good understanding of the systems engineering concepts and interrelationships of processes.
• Have a deep understanding of test and evaluation processes, techniques and execution.
• Ability to utilize equipment in order to perform accurate and repeatable simulations and analysis.
• Knowledge and experience in data analysis techniques and verification of data integrity.
• Project management capabilities towards fulfillment of test objectives at affordable costs.
• Minimum of 7 years' experience in Test and Evaluation execution, with at least 3 years in a military context.

A Snapshot of Your Day

Your day involves acting as a Test Engineer, collaborating with cross-functional teams to achieve high-quality testing and commissioning objectives. You support the planning and execution of tests for compressors and associated systems, preparing and commissioning test runs. Throughout the day, you set up evaluation software, address test-related questions, and present results to customers. You also support people evaluation, training, and development, fostering a culture of teamwork and excellence.

How You'll Make an Impact

• Act as a Test Engineer within an organization focused on the assembly, packaging, and testing of compressors and gas turbines for the oil & gas, petrochemical, and power generation industries.
• Collaborate within a cross-functional matrix organization to execute specific test and commissioning objectives, ensuring the highest quality standards are met on time.
• Support personnel evaluation, training, and development while promoting a culture of teamwork, excellence, and inclusiveness across the organization.
• Assist in planning and executing workshop and site tests for compressors, drivers, and associated systems, including preparation, commissioning, and execution of compressor test runs with corresponding drivers.
• Set up existing evaluation software for specific tests and serve as a point of contact for order and project management regarding test-related questions and issues, while defining requirements for test equipment and developing new testing concepts.
• Act as the primary contact for customer representatives during tests, addressing all test-related topics and questions, presenting test results internally and to customers, and supporting bid activities for new applications requiring tailored testing approaches.

What You Bring

• A minimum of 5-7 years of experience in the field, complemented by a Bachelor's Degree in Mechanical Engineering or a related discipline.
• Expertise in turbo machinery, including compressor design, commissioning, and operation of compression applications, as well as applied thermodynamics and rotor dynamics.
• Proficient in measurement and control technology, test instrumentation, and possess a basic understanding of electric drives, gas turbines, and steam turbines.
• Confident in using MS Office and SAP, with fluency in written and spoken English; proficiency in Arabic and other languages is a strong plus.
• Excellent communication skills with the ability to work effectively in an international team environment, demonstrating cultural sensitivity and a willingness to travel worldwide.
• Strong leadership abilities with a clear and systematic approach to time and test management, capable of understanding and interpreting complex technical, contractual, and organizational problems while maintaining composure under pressure and focusing on quality.

About the Team

Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet.

Who is Siemens Energy?

At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation.

Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation.

Find out how you can make a difference at Siemens Energy:

Our Commitment to Diversity

Lucky for us, we are not all the same. Through diversity we generate power. We run on inclusion and our combined creative energy is fueled by over 130 nationalities. Siemens Energy celebrates character – no matter what ethnic background, gender, age, religion, identity, or disability. We energize society, all of society, and we do not discriminate based on our differences.

Rewards/Benefits

• Opportunity to work on challenging projects in an exciting environment
• Opportunity for remote/flexible work
• Professional support and strong collaboration with colleagues around the world
• Professional development opportunities within the company

The POS Test Engineer will be responsible for ensuring the quality and reliability of Point-of-Sale (POS) systems, including contact, contactless, and digital payment solutions. This role involves executing functional, integration, and compliance tests, validating EMV and ISO 8583 message flows, and collaborating closely with development, product, and QA teams.

The ideal candidate will have strong technical knowledge of EMV chip card technology, NFC, tokenization, and backend authorization flows, with hands-on experience in transaction log analysis and defect reporting.

• Testing & Validation: Plan, design, and execute test cases for POS systems, covering contact, contactless, and digital wallet transactions (Apple Pay, Google Pay, Samsung Pay)
• Perform functional, integration, regression, and UAT testing for POS terminals and ECR integrations
• Validate ISO 8583 message formats, EMV data elements, and transaction lifecycle flows
• Conduct EMV L1/L2 and brand certification testing using UL Brand Test Tool, FIIME, or equivalent tools
• Test tokenized transactions and validate PCI compliance requirements
• Debugging & Analysis: Analyze transaction traces, EMV kernel logs, and host response messages to identify and resolve issues
• Perform APDU command-level analysis and backend data verification using SQL
• Work with switch simulators and authorization systems to replicate and troubleshoot issues
• Documentation & Reporting: Create and maintain test plans, test scenarios, and execution reports
• Log, track, and manage defects using tools like JIRA, TestRail, or HP ALM
• Provide detailed feedback and insights to development and product teams
• Collaboration & Continuous Improvement: Collaborate with cross-functional teams (development, business, compliance) to ensure timely delivery of quality releases
• Support continuous improvement of testing processes and automation opportunities where applicable

• Bachelor's degree in Computer Science, Information Technology, Electronics, or a related field (or equivalent experience)
• 3+ years of hands-on experience in POS testing, EMV certification, or payment systems QA
• Strong knowledge of EMV standards (contact & contactless) and NFC/Smart Card technologies
• Understanding of ISO 8583 message format, MTI, DEs, and bitmap analysis
• Experience with digital wallets (Apple Pay, Google Pay, Samsung Pay) and tokenization
• Experience using EMV test tools (UL Brand Test Tool, FIIME, etc.)
• Proficiency in designing, reviewing, and executing manual test scripts
• Familiarity with POS-ECR integration testing and backend transaction verification
• Hands-on experience with defect management and test management tools (JIRA, TestRail, Confluence, HP ALM)
• Basic SQL knowledge for backend data verification
• Strong problem-solving skills and ability to perform detailed transaction log analysis
• Excellent communication skills and ability to work effectively with cross-functional teams

We are an equal opportunities employer and welcome applications from all qualified candidates.

Overview

Role – Application Test Engineer. Location – Riyadh, KSA

• Test the assigned application from entire landscape.
• Design Test Scenarios / Cases / Scripts as per need basis.
• Execute the identified sub-set of test scenarios / cases provided by Test Architect or COE Lead.
• Record defects in Defect Management Tool.
• Update Project Progress.

• Retesting of defects fixed.
• Daily reporting to QIC managed services testing team & client QA management.
• Responsible for End-to-End testing.
• Defect creation & tracking till closure.
• Ensure to cover both languages (English / Arabic) during execution phase.

Overview

You must first log in before applying to jobs.

Hiring Software Test Engineer for one of our Banking Domain Client in Riyadh, KSA.

• Must have Experience in Banking Domain and Products Mainly Loans.
• Fluent in Arabic and English.
• ISTQB Certified
• Strong knowledge of banking products.
• Software development lifecycle (SDLC) and agile methodologies.

Kindly send CVs to

Overview

You must first log in before applying to jobs.

Software Test Engineer for a Banking Domain client in Riyadh, KSA.

• Experience in Banking Domain and products, mainly loans
• Fluent in Arabic and English
• ISTQB Certified
• Strong knowledge of banking products
• Understanding of Software Development Life Cycle (SDLC) and agile methodologies

Please send your CV to