39 Electronics Internship jobs in Saudi Arabia

• Direct and/or perform comprehensive preventive and corrective maintenance activities to simulation equipment.
• Performs maintenance tasks such as repairs of complex electronic equipment, replacing components and wiring circuits, and taking test readings using common instruments such as digital multi-meters, signal generators, semiconductor testers, curve tracers, oscilloscopes, etc.
• Extensive knowledge of simulator computer/operating systems and possess the abilities to competently and independently function/operate in a computer rich environment.
• Possesses a working knowledge of computer network architecture.
• Demonstrated familiarity with the interrelationship of circuits and judgment in planning work sequence and in selecting tools and test equipment.
• Fabricate/modify electrical/electronic devices and associated hardware or related software installations.
• Possess abilities to effectively communicate with Site Management regarding scheduled and unscheduled maintenance of device/trainer and advise of impacts to operational status.
• Ability to make sound/logical decisions regarding facility operations with minimal supervision in the absence of site management.
• Required to communicate/solicit effectively to site management on all aspects of trainer/simulator operations as it pertains to readiness/training device quality of systems/technician staffs' capabilities.
• Assist Site Manager/Shift Supervisor with all logistics functions. Perform MSP inventories as required.
• Ability and willingness to work rotating shifts and/or weekends as specified by Government Contract requirements.
• Perform other duties as assigned by Site Management.
  
  

• Minimum of 2 years as an Electronics Maintenance Simulator Technician II.
• Minimum four (4) years' experience as a simulator maintenance or equivalent.
• Graduate from a two (2) year resident Electronics Technician course at an accredited technical institute or the equivalent. Work experience may be substituted for formal education. With Government concurrence, equivalent simulator maintenance experience and education may be substituted, provided it is comparable to trainer systems listed in the task order.
• Preferred Information Assurance (IA) certification of A+ and a Security + desired.
• Mental alertness and ability to follow written and verbal instructions given in English.
• Ability to pass medical examination for OCONUS assignment.
• Physical ability to walk, stand, and/or sit for extended periods of time, and to climb 2 flights of stairs is required.
• Must be able to lift and carry 75 pounds.
• The ability to cope with stressful situations.
• Ability to conform with foreign culture and work with foreign personnel (Saudi Arabia).
• Must always present a professional appearance in demeanor and dress.
• The applicant must be a US citizen, possess the ability to obtain a US passport and must have and maintain a valid driver's license.
• Applicants will be subject to a government security investigation and must meet eligibility requirements to receive and maintain a minimum of a SECRET clearance for access to classified information.
  
  

Latest Union Trade Test and Training Center Industrial Posts Riyadh 2024

Union Trade Test and Training Center jobs advertisement dated about 13 May 2024 in daily Express Newspaper invites application for the vacant post of photocopier technician, bms operator, power plant technician, engineer, boiler operator, fire fighting technician, lift elevator technician, chiller technician, ac technician, ccms operator, home appliances technician, electrical technician, safety system maintenance technician, bms technician, electronics technician, system control tehnician, pump mechanic, stp technician, mechanical engineer, ccms technician, electronics engineer, chiller operator, cutter technician, safety supervisor, boiler technician, laundry equipment technician, generator technician, mechanical technician, safety technician officer, general mechanic, medical gas technician, electro mechanical technician and electrical engineer in Riyadh, dammam Saudi Arabia. Matric, B.E, Bachelor, DAE and Intermediate etc. educational qualification will be preferred.

Union Trade Test and Training Center latest Overseas Industrial jobs and others can be applied till May 19, 2024 or as per closing date in newspaper ad. Read complete ad online to know how to apply on latest Union Trade Test and Training Center job opportunities . Salary varies from 325000. Earn more by overtime. Free transport, accommodation and medical may be available.

For more jobs register with Jobz.pk.

Job Title:

Male & Female “Electronics and Embedded Systems Trainer ” for Riyadh, KSA

Job Location:

Riyadh, Kingdom of Saudi Arabia

RequiredFrom:

FromMid-March 2025

Company Name:

Lincoln College International

Are you ready to embark on an exciting journey in education at a newly opened, state-of-the-art industry-specific college? Lincoln College International is a trusted partner in delivering a world-class education for Saudi Arabian citizens, aligning its vision with the ambitious 2030 Vision. We are seeking dynamic and passionate Trainers (male and female) to join our esteemed team in Riyadh!

JOB PURPOSE:

Lincoln College International (LCI) is seeking a specialist trainer with expertise in electronics, embedded systems, PCB manufacturing, and automation, strongly emphasizing automated production lines and industrial control systems. This role is instrumental in delivering hands-on training in key technologies in defense electronics, industrial automation and advanced manufacturing. The successful candidate will prepare, deliver, and assess training supporting the progression of trainees into specialist roles within the industry. Due to the sensitive nature of this role, candidates will be required to undergo enhanced background security checks as part of the recruitment process. Good competency in English is mandatory. Non-native candidates must provide proof of English competency through IELTS, TOEFL, STEP, or a similar language exam. An offer of employment will be made subject to final approval from the client .

PRINCIPAL DUTIES & RESPONSIBILITIES :

Training & Course Delivery

· Deliver high-quality theoretical and practical training in a range of modules, including:

1. Electronics Diagnostics and Testing

2. Microcontroller and Embedded Systems Technology

3. PCB Manufacturing and Assembly

4. Industrial Automation and Control Systems

5. Automated Production Lines in Chemical and Defense Manufacturing

6. Instrumentation and Advanced Circuit Design

· Design and implement engaging, hands-on lessons, workshops, and assessments that align with industry standards and best practices.

· Ensure training is industry-focused, with a strong emphasis on real-world applications and technical competencies.

· Assess trainees’ practical and theoretical understanding, providing structured feedback to support learning and skill development.

· Maintain high teaching and learning quality standards through peer reviews and lesson observations.

· Actively engage and motivate trainees, fostering technical excellence and professional behaviour.

Course & Program Development

· Manage course content and success rates, ensuring effective learning outcomes.

· Develop and refine training materials to align with industry advancements and regulatory requirements.

· Contribute to developing and enhancing LCI’s training programs, ensuring they remain at the cutting edge of technology and best practices.

Quality Assurance & Assessment

· Conduct assessments and internal verification and maintain documentation in compliance with LCI policies.

· Ensure the safety, functionality, and upkeep of training equipment, tools, and lab facilities.

Trainee Engagement & Support

· Organize enrichment activities, including industry visits, guest lectures, and hands-on projects.

· Support the selection, recruitment, and enrollment of trainees into LCI programs.

· Provide guidance, mentorship, and career support to trainees, ensuring their success in the program and progression into employment.

· Promote equal opportunities, safeguarding, and welfare within the training environment.

Collaboration & Professional Development

· Work as part of a flexible training team, collaborating with colleagues to enhance the learning experience.

· Stay updated with industry and pedagogical advancements through continuous professional development and training.

Undertake such other duties commensurate with the level of the post as may be required from time to time.

This is not a complete statement of all duties and responsibilities of this post. The post holder may be required to carry out other lawful and reasonable duties, as defined under respective UK and Saudi law, as directed by a supervising manager.

PERSON SPECIFICATIONS:

Essential Requirements

· Minimum of 3 years of industry experience in electronics manufacturing, embedded systems, PCB assembly or automation, ideally in a chemical manufacturing, explosives production or defense electronics environment.

· Minimum of Diploma (or equivalent) in Electronics Technology, Electrical Technology, Automation Technology or a related field. Or a recognized professional certification in a related field, for example:

§ IPC Certified Electronics Technician

§ Certified PCB Design and Manufacturing Specialist

§ Certified Automation Professional

§ Siemens PLC Programmer Certification

· Excellent communication skills and motivation to engage and inspire trainees (A CEFR B1 ability in English is required).

· Enhanced security clearance will be required.

· Understanding of health & safety regulations and best practices.

Desirable Requirements

· Experience in one or more of the following systems: Analog and digital electronics testing & troubleshooting, RF / Microwave and Optoelectronic testing, Microcontroller programming and embedded systems, Automated testing equipment and robotics integration.

· Prior teaching or training experience in a technical or vocational setting.

· Recognized teaching qualification (e.g., Level 4 Certificate in Education and Training, PGCE, or equivalent).

· Experience with use of Virtual Reality (VR) and Augmented Reality (AR) technologies.

· Experience with assessing and internal verification.

· End-Point Assessment (EPA) experience or an assessor qualification such as CAVA (Certificate in Assessing Vocational Achievement) or TAQA.

· Industry-recognized certifications, such as:

• Lean Six Sigma (Green Belt or higher).

• Project Management certification such as PMP or PRINCE 2 practitioner.

Continues Professional Development

· Candidates without a formal teaching qualification will be expected to complete a Level 4 Certificate in Education and Training (supported by LCI) within six months of starting. Additionally, opportunities for further professional development and industry certification will be provided. Those meeting the minimum educational qualifications but lacking work experience may be considered for the Saudi Junior Teacher Development Program.

Join us at Lincoln College International and become part of a progressive and visionary institution that is shaping the future of education in Saudi Arabia. Apply now and take your teaching career to new heights!

SALARY AND BENEFITS (NON-NEGOTIABLE) :

• Base salary SAR17,000 per month TAX FREE

• Housing allowance SAR 4,250per month TAX FREE

• Transportation allowance SAR 500per month TAX FREE

• Flight allowance SAR 500per month TAX FREE

Monthly Gross Salary – 22,250 SAR

Additional Benefits:

· Onboarding flights (if hired from outside KSA)

· Private healthcare insurance

· Visa costs covered (if hired from outside KSA)

· Iqama (Resident Permit) transfer costs will be covered by LCI, if the candidate is inside KSA

· 30 days Annual Leave per annum

· End of Service Award upon successfully completing the contract

Essential Requirements

· Minimum of 3 years of industry experience in electronics manufacturing, embedded systems, PCB assembly or automation, ideally in a chemical manufacturing, explosives production or defense electronics environment.

· Minimum of Diploma (or equivalent) in Electronics Technology, Electrical Technology, Automation Technology or a related field. Or a recognized professional certification in a related field, for example:

§ IPC Certified Electronics Technician

§ Certified PCB Design and Manufacturing Specialist

§ Certified Automation Professional

§ Siemens PLC Programmer Certification

· Excellent communication skills and motivation to engage and inspire trainees (A CEFR B1 ability in English is required).

· Enhanced security clearance will be required.

· Understanding of health & safety regulations and best practices.

Desirable Requirements

· Experience in one or more of the following systems: Analog and digital electronics testing & troubleshooting, RF / Microwave and Optoelectronic testing, Microcontroller programming and embedded systems, Automated testing equipment and robotics integration.

· Prior teaching or training experience in a technical or vocational setting.

· Recognized teaching qualification (e.g., Level 4 Certificate in Education and Training, PGCE, or equivalent).

· Experience with use of Virtual Reality (VR) and Augmented Reality (AR) technologies.

· Experience with assessing and internal verification.

· End-Point Assessment (EPA) experience or an assessor qualification such as CAVA (Certificate in Assessing Vocational Achievement) or TAQA.

· Industry-recognized certifications, such as:

• Lean Six Sigma (Green Belt or higher).

• Project Management certification such as PMP or PRINCE 2 practitioner.

Surbana Jurong takes certain industry-accepted precautions to secure the website or portions thereof. However, the user understands and agrees that such precautions cannot guarantee that use of the website is invulnerable to security breaches, nor does Surbana Jurong make any warranty, guarantee, or representation that use of the website is protected from all viruses, worms, bugs, Trojan horses and other vulnerabilities.

SENIOR ICT ELECTRONICS & SYSTEMS ENGINEER page is loadedSENIOR ICT ELECTRONICS & SYSTEMS ENGINEER Apply locations SJ KSA Riyadh time type Full time posted on Posted 30+ Days Ago job requisition id JR104150

We are currently seeking an experienced Senior ICT Electronics & Systems Engineer to join one of our airport projects in KSA. The ideal candidate will have experience in a similar role who can handle the responsibility of delivering ICT design and supporting airport projects.

Responsibilities:

• Oversee design review, validation, and operation of special airport systems including but not limited to airfield lighting, navigational aids, ATC systems, CCTV, Access Control Systems, BHS, A-VDGS, PLB, airport-wide ICT networks, and system integration solutions.
• Ensure ICAO, FAA and local code compliance of runway/taxiway airfield systems designs.
• Take the lead in managing airport special system design and engineering review from the initial design stage to construction and operation & maintenance.
• Demonstrate proven project management skills in design, scope control, schedule management, and cost control in airport design and construction.
• Show expertise in dealing with various types of contracts such as Lump sum, Design and Build (D&B), and Engineering, Procurement, and Construction (EPC).
• Oversee the installation, testing, commissioning, and closure services of airport projects.
• Oversee the field installation and testing, commissioning, operation & maintenance, and operational readiness services for various airport-wide ICT network
• Ensure all systems meet the required quality and safety standards, regulations, and laws.
• Perform baseline design and peer review of various systems, ensuring they are ready for construction and implementation.

Requirements:

• Bachelors or Master's degree in Electronics or Communication Engineering or related field.
• A minimum of 15 years of experience in a similar role, preferably in the aviation industry.
• Extensive experience in the design, engineering, and integration of a wide range of special airport systems.
• Proficient in FIDIC contracts such as Lump sum, D&B and EPC.
• Exceptional project management skills, including project design and control in change/scope, schedule, and costs for airport design and construction.
• Strong leadership, communication, and interpersonal skills.

At Surbana Jurong, we put talent, hard work, teamwork and a fun workplace together to approach problems and solve them creatively and collaboratively. Join us in making a positive impact on the world!

Activate your Personal Job Alerts now and you will be notified of opportunities as soon as they are advertised.

If you are a current SJ employee, please apply for available positions in the Group by using the Internal Career Site

SJ is a diverse collective of problem solvers for the built environment, continually reimagining ways to create a smart and sustainable future.

Headquartered in Singapore, the group has a global talent pool of 16,000 in its member companies AETOS, Atelier Ten, B+H, CHIL, KTP, Prostruct, Robert Bird Group, SAA, SMEC and Surbana Jurong, based in more than 120 offices in over 40 countries. They include architects, designers, planners, engineers, facilities managers and other specialists driven by progressive thinking and creative ideas to shape a better future.

Its technical experts deliver sustainable solutions that cover the entire project life cycle from planning and design, through to delivery and management, as well as a full suite of multidisciplinary consultancy services across a diverse range of sectors including transportation, water, aviation, healthcare, hospitality and renewables.

A global urban, infrastructure and managed services consulting firm with over 70 years of track record in successful project delivery, SJ has built more than a million homes in Singapore, created master plans in more than 60 countries and developed over 100 industrial parks globally.

SJ is #23 in Engineering News-Record’s 2023 Top 225 International Design Firms, #14 in World Architecture 100 2024, and Asia Pacific FM Technology Provider of the Year 2022, awarded by International Facility Management Association.

Get AI-powered advice on this job and more exclusive features.

Responsibilities

• Receive technical queries from Service Teams and provide solutions promptly.
• Review and validate technical reports required by MCI.
• Review and validate warranty claims and RMA reports of AV/Small Home Appliances received from branches.
• Identify training needs of Technical Teams periodically.
• Schedule training programs and product updates for maintenance teams in Electronics service line (AV/Small Home Appliances).
• Arrange updated training manuals, presentations, software, and share with technical teams.
• Develop Q&A for Electronics/Small Home Appliances to support call center/help desk.
• Issue service bulletins and service tips to repair products promptly.
• Arrange OJT training for new technical staff and conduct cross-product training for senior technicians; follow up to measure effectiveness.
• Ensure availability of proper tools, jigs, and equipment; review and identify requirements periodically.
• Produce and review monthly KPI reports of Service Center technicians and suggest improvements.
• Evaluate technical capabilities of company and third-party technicians periodically and suggest action plans.
• Assist in competency evaluations and skills contests.
• Support in hiring competent technical staff.
• Update and review service labor charges and warranty periods under the direction of the Technical Support Manager.
• Recommend and update technical procedures, documentation, and policies.
• Analyze repair data for common defects and parts to identify quality issues.
• Coordinate with spare parts section for substitute parts solutions and IGP.
• Coordinate with marketing for product information updates.
• Maintain records of training, technical support, product quality, RMA, warranty claims, and debit notes.
• Follow reporting procedures and provide required details to vendors or management.

Qualifications

• A higher diploma/degree in Electronics Technology/Engineering or related field with at least 5 years’ experience in a technical support role, including 1 year in a supervisory position in KSA or ME.
• Or a diploma (minimum 3 years) in Electronics or related field with at least 10 years’ experience, including 2 years in supervision.
• Experience with operation of COF and Laser Machines for LCD repair is a plus.

Mid-Senior level

Full-time

Customer Service and Engineering

Retail

Get notified about new Technical Support Specialist jobs in Jiddah, Makkah, Saudi Arabia .

Select how often (in days) to receive an alert:

Description:

Requisition ID:14557

CityCB Opera.

Group overview:

Headquartered in Riyadh, Saudi Arabia, we operate construction and manufacturing businesses, design & development centers and a host of facilities in the Middle East and other countries.

alfanar is involved in:

• Electrical, Electromechanical and Civil Engineering Construction
• Manufacturing and Marketing Electrical Construction Products
• Allied Engineering Services

Our Main Divisions:

• alfanar electric
• alfanar Construction
• alfanar Building Systems

alfanar electric

alfanar electric is the industrial arm of alfanar, manufacturing a variety of low, medium and high voltage electrical construction products.

alfanar electric operates industries in:

• Riyadh and Jubail, Saudi Arabia
• Dubai, UAE
• London, UK

alfanar has a development and engineering center in Chennai, India.

Industrial Complex, Riyadh

The center of alfanar’s industrial activities is alfanar Industrial Complex situated in the Third Industrial Zone on Al-Kharj Road, Riyadh.

Spread across 700,000 square meters, the Complex houses alfanar’s facilities.

The Complex has a comprehensive infrastructure including a data and communication center as well as a commercial zone.

This position exist to assist in performing quality control activities efficiently, in timely manner and quality standards as per the defined policies and procedures to achieve departmental operational plans and developments.

Product Inspection and Testing:

• Conduct thorough inspections and tests on products to ensure they meet quality standards and are released on time.

Project Coordination:

• Collaborate with project teams and other departments to facilitate the timely and efficient execution of projects.

Non-Conformance Management:

• Identify and control non-conforming products by issuing punch lists or Non-Conformance Reports (NCRs) and follow up to ensure completion and resolution.

Third-Party and Customer Inspections:

• Coordinate inspections with third-party agencies and customers. Work closely with other departments to address and finalize customer comments, ensuring prompt product release.

Reporting and Documentation:

• Prepare detailed inspection and test reports for each project, ensuring accuracy and completeness.

PLC Logic Programming:

• Develop and implement PLC logic programming based on customer requirements, such as pump control, two out of three transformer incomers, and Automatic Transfer Switch (ATS).

Customer Complaint Resolution:

• Address and resolve customer complaints by coordinating with the customer service team to ensure customer satisfaction.

HR Proficiency:

• Ability to obtain updated soft and technical skills related to the job
• To have a vision and a plan for the career path and how to achieve it.

Delivery:

• Perform the planned activities to meet the operational and development targets as per delivery schedules.
• Utilize resources effectively to achieve objectives within efficient cost and time.
• Provide a periodic report formatted by detailing the deviation and execution of planned tasks.

Problem-Solving:

• Solve any related problems arise and escalate any complex operational issues.

Quality:

• Ensure quality requirements to develop effective quality control and processes including specifications for products or processes or related activities.

Business Process Improvements:

• Coordinate well-defined written systems, policies, procedures, and seek automations opportunities as much as possible.

Compliance:

• Comply to related policy and procedures and work instructions.

Health, Safety, and Environment:

• Ensure compliance of relevant safety, quality, and environmental management procedures and controls within defined area of work activity to guarantee safety, legislative compliance, and delivery of high-quality products/services.