What Jobs are available for Electrical Systems in Saudi Arabia?

Job Purpose

Ensure the effective operation, maintenance, and troubleshooting of electrical backup systems across DACO's airport infrastructure. Support the reliable performance of generators, UPS systems, batteries, and emergency lighting to ensure continuous operations during power outages and critical incidents.

Position Accountability

Description Generators, UPS, Batteries, and Emergency Lights

1. Perform routine inspections and preventive maintenance on all electrical backup systems, including generators, uninterruptible power supply (UPS) systems, batteries, and emergency lighting, ensuring full operational readiness.

2. Monitor the operation of backup power systems to ensure seamless transitions during power outages and maintain continuous power to critical infrastructure.

3. Troubleshoot and repair electrical backup systems, coordinating with vendors and service providers for advanced repairs or replacements when necessary.

4. Ensure compliance with DACO's safety regulations and electrical standards, updating and maintaining all electrical backup systems in line with industry best practices.

5. Assist in the installation and setup of new electrical backup systems, ensuring proper configuration and integration with existing systems.

6. Monitor the fuel supply and condition for generators, ensuring they are ready for immediate use in case of emergencies.

7. Ensure that batteries and UPS systems are tested and maintained regularly to prevent downtime and enhance system reliability.

Compliance and Best Practices

1. Ensure all electrical backup systems comply with local and international electrical and safety regulations, as well as DACO's internal policies.

2. Maintain accurate records of inspections, repairs, and updates to ensure compliance with regulatory standards and internal audits.

3. Assist in preparing documentation for compliance inspections and audits conducted by regulatory authorities or internal audit teams.

Incident Management

1. Respond promptly to electrical power outages or system malfunctions, ensuring the immediate activation of backup systems to minimize operational disruptions.

2. Participate in emergency response drills, ensuring electrical backup systems support the operational needs during critical incidents.

3. Assist in the coordination of system testing for emergency power transfers, ensuring all critical systems have backup power in place. Team Collaboration and Learning

4. Collaborate with team members to share knowledge and provide support, contributing to a positive and productive work environment.

5. Engage in continuous learning by seeking feedback, attending training sessions, and staying updated on industry trends in electrical backup systems.

Skills

1. Knowledge of electrical systems and components

2. Understanding of backup power systems

3. Ability to troubleshoot and repair electrical issues

4. Proficiency in reading and interpreting electrical diagrams

5. Familiarity with electrical codes and regulations

6. Attention to detail and precision in work

7. Strong problem-solving skills

8. Ability to work well under pressure

9. Excellent communication skills

10. Commitment to safety protocols and procedures

Education

Bachelor's degree, Facility Management or equivalent.

Experience:

Minimum 3 years

We are looking for an Electrical Design Engineer to develop, improve, and support electrical systems for industrial applications. You will be responsible for designing distribution systems, preparing drawings, selecting materials, and supporting manufacturing and installation processes, while ensuring compliance with engineering standards and safety codes.

Responsibilities:

• Design and layout electrical distribution systems for industrial plants
• Prepare load schedules, single-line diagrams, and technical specifications
• Create system models, perform simulations, and propose design improvements
• Support material selection, vendor coordination, and technical decision-making
• Generate detailed design documentation, reports, and test requirements
• Assist in the manufacturing and installation of new electrical systems
• Forecast electrical system costs and project budgets
• Conduct field inspections, surveys, and ensure quality compliance
• Review designs for code compliance and good engineering practices
• Coordinate and lead electrical design activities across project phases
• Analyze and resolve design and operational issues as they arise

Requirements:

Education: Bachelor’s degree in electrical engineeringor anyrelated field

Experience: +5 years of experience

Languages : Professional in English

• Strong knowledge of rotating and static electrical machines
• Hands-on maintenance experience with industrial electrical equipment
• Proficiency in creating and verifying engineering drawings
• Familiarity with industry codes, standards, and best practices

Skills:

• Electrical system design and load calculation expertise
• Electrical distribution design for industrial environments
• Strong drawing preparation and verification skills (AutoCAD or similar)
• Knowledge of material selection and vendor coordination
• Experience with electrical system modeling and simulations
• Proficiency in interpreting and applying electrical codes and standards
• Excellent troubleshooting, problem-solving, and decision-making abilities
• Strong documentation and technical reporting skills
• Team coordination and leadership in multi-discipline projects
• Effective communication with vendors, engineers, and construction teams

Urgently looking for Design Engineer Electrical - LV

About the role:

Design Engineer Electrical is responsible for the design, engineering and technical support of LV panels, ensuring compliance with international standards (IEC) and local regulations. The role also includes coordination with clients, vendors and internal teams to deliver high-quality solutions on time and within budget. The ideal candidate will be responsible for designing, reviewing and coordinating Electrical systems involving LV components in alignment with local codes and international standards for large-scale projects across Saudi Arabia. This role requires strong technical expertise in electrical and mechanical engineering, manufacturing principles. Responsibilities include product development, ensuring compliance with industry standards and continuous improvement and collaborating with other departments to deliver high-quality, cost-effective Low Voltage system for switchgear solutions. This role ensures that all designs meet client expectations, comply with Saudi building codes and international standards.

Responsibilities:

· Design and develop Low Voltage switchgear panels (MDB, SMDB, DB, MCC, ATS, Capacitor Banks).

· Prepare electrical SLDs, GA drawings, control schematics, and wiring diagrams using AutoCAD or EPLAN PRO.

· Perform load calculations, short circuit calculations, cable sizing, and voltage drop analysis.

· Prepare technical submittals, datasheets, and compliance documents for client and consultant approval.

· Collaborate with the production and assembly team to ensure design accuracy and quality control Plan.

· Conduct site visits for technical support, commissioning, and troubleshooting.

· Ensure designs comply with IEC standards, Saudi Electricity Company (SEC) specifications, and relevant safety regulations.

· Coordinate with procurement for material selection

· Attend FATs (Factory Acceptance Tests) with clients and ensure performance verification.

· Support the sales team with technical clarifications, BOQs and project bidding documentation.

· Liaise with supplier for Panel accessories, consultants, and contractors to review technical submittals and resolve design issues.

· Support Production and site teams during manufacturing, installation, commissioning, and handover phases as needed.

· Participate in value engineering, cost estimation and risk assessments related to LV interfaces.

Requirements:

· Bachelor's Degree in Electrical Engineering

· Minimum 2–5 years of relevant experience in LV Panel Design & Engineering.

· Proficient in AutoCAD, EPLANPRO, or similar design software.

· Strong understanding of IEC standards and SEC regulations.

· Knowledge of electrical protection systems, PLC integration, and control wiring.

· Good communication skills and ability to work under pressure in a fast-paced environment.

· Strong knowledge of LV systems integration as per IEC 61439 Standards.

· Excellent written and verbal communication skills in English required.

· Strong knowledge of Saudi standards and authority procedures (Civil Defence, Ministry of Defence Royal Commission, SEC, etc.).

· Experience in working on mega projects, ideally under SEC, Aramco, and Infrastructure Industry.

· Project management and team leadership experience is a must.

· Knowledge on Electrical devices, handling procedures specified by related principle

· Knowledge of ERP software and Microsoft Office

Job Type: Full-time

Role & responsibilities

Technical activities related to Electrical Design, Engineering of HV/MV/LV Power Control Room/Modular Substation/E-House) by using various software, including but not limited to the following:

• To yield a safe, quality and cost-effective design / product in a timely manner as per client's requirements.

• To study and comply with required standards and specifications.

• To perform and prepare HV/MV/LV Substation Electrical & Instrumentation Design Calculations including Lighting, Grounding, Shielding, Batter & Battery Charger Sizing, Station Service Transformer sizing & relevant drawings / Documents.

• To prepare Electrical Layout Drawings (General Equipment Arrangement, Lighting, Grounding, Data and Telephone System)

• To prepare Bill of Material, Documents and Drawings, etc.

• To Select and Evaluated related material and components, e.g. lighting, fixtures, panel boards, HV/MV/LV cables, MCTs, Grounding busbars, Shielding mast, surge arrestor, etc.

• To perform technical evaluation for the quotations of electrical equipment / materials and placing the purchase orders.

• To provide Technical Support and Product Cost Sheets to Sales Engineer

• To perform Design & Development of other products (& Drawings / Documents) as deemed necessary by the company.

Preferred candidate profile

Direct work experience inf minimum 5 years in the field of Electrical & Instrumentation Design/Engineering of HV/MV/LV Substation for the Utility or Oil & Gas Industry; Power System Protection & Control by using various design/engineering software, i-eDilux, ETAP, Multigrid, etc, and AutoCAD / MicroStation.

Required Knowledge & Skills

Technical knowledge / expertise related to Electrical Design / Engineering of HV/MV/LV Substations, Strong Skills in Design Application Software & AutoCAD / Microstation; Proficient in English Language.

Strong knowledge of requirement of various equipment / system in the Substation like, HVAC, Fire Alarm, Fire Fighting, etc and good knowledge of International Technical Standards (ANSI / IEC / UU ASTM / NEMA / DIN / NFPA / SASO, etc.) Conversant with ISO / QMS / EMS functions & documentation.

Education Requirement:

BE / BTech Electrical / Electronics / Instrumentation / Communication / Mechatronics

At Jacobs, we're challenging today to reinvent tomorrow by solving the world's most critical problems for thriving cities, resilient environments, mission-critical outcomes, operational advancement, scientific discovery and cutting-edge manufacturing, turning abstract ideas into realities that transform the world for good.

Your impact

We share a common purpose – to make the world more connected and sustainable. And we're excited about the innovative ways we can change the world. If you are also interested in turning abstract ideas into realities that transform the world for good, then Jacobs is where you belong.

Bring your curiosity, passion for innovation, and talent for multi-tasking in a fast-paced environment. We'll help you grow, pursue and fulfill what inspires you – so we can make big impacts on the world, together

Jacobs is looking for a talented Electrical Engineer to join our Buildings and Logistics Design team in Riyadh. You will be part of a large project team supporting the Electrical Design solutions on large scale projects produced to very high technical quality. The suitable candidate should have a good design knowledge on the following systems

• Electrical load estimation and calculations.
• Lighting design with control systems.
• Low voltage power distribution system design for lighting, small power, power supply to plants and technical equipment for Building Services.
• Standby power supply system design.
• Fire alarm system design.
• Knowledge of BIM is essential.

Here's what you'll need

• You will hold Bachelor's degree in relevant discipline from a recognized university.
• Previous experience in Electrical Design on large projects.
• Experience in interdisciplinary coordination as an additional skill will be preferred.
• You will also be flexible to adopt new technologies.

Jacobs. A world where you can.

From our inclusive employee networks to our positive mental health champions – we're committed to driving a culture of caring where you can be you. Joining Jacobs not only connects you locally but globally - and together, our diverse perspectives and unique backgrounds power our collective strength. We collaborate and share By supporting one another, we all succeed.

With safety and flexibility always top of mind, we've gone beyond traditional ways of working so you have the support, means and space to maximize your potential. You'll uncover flexible working arrangements, benefits and opportunities to do good too – from participating in our global giving and volunteering program, to exploring new and inventive ways to help our clients make the world a better place.

No matter what drives you, you'll discover how you can cultivate, nurture and achieve your goals – all at a single global company.

We value collaboration and believe that in-person interactions are crucial for both our culture and client delivery. We empower employees with our hybrid working policy, allowing them to split their work week between Jacobs offices/projects and remote locations enabling them to deliver their best work.

Your application experience is important to us, and we're keen to adapt to make every interaction even better. If you require further support or reasonable adjustments with regards to the recruitment process (for example, you require the application form in a different format), please contact the team via Careers Support.

Rawafid is on the lookout for a skilled and innovative Electrical Design Engineer to join our dynamic engineering team. In this essential role, you will be responsible for designing and developing electrical systems for various projects, ensuring that they meet performance, safety, and cost-effectiveness standards. You will work closely with project teams to translate project requirements into design specifications, producing technical documentation and detailed drawings. Your expertise will not only contribute to the successful execution of projects but will also play a key role in enhancing operational efficiency and safety. If you are passionate about electrical design and eager to make an impact in the engineering field, we would love to have you on board.

Key Responsibilities

• Establish electrical and low-current loads required.
• Preparation, reading and reviewing of wiring diagrams, load calculations, cable sizing calculations, earthing calculations, single line diagrams, electrical load lists, lighting calculations, motor data sheets, cable datasheets, small-power layouts, electrical layouts, electrical installations, etc
• Prepare detailed designs including specifications, drawings and BOQs of Water pumping stations, Lift stations and Water Storage facilities, and water treatment/purification systems, residential and commercial buildings
• Read and review piping & instrumentation diagrams
• Assess the quality and quantity of each implementation phase of the project phasing scheme
• Assess the most suitable, economic and easy way to operate electrical systems
• Prepare power, lighting, earthing reports and documentation
• Preparation priced and un-priced of Bill of Quantities (BOQ) for Projects
• Preparation of project specifications
• Guiding draftsman/modeler to produce the required drawings
• Preparation of detailed cost estimates
• Create and review electrical engineering drawings and specifications
• Perform calculations and simulations to ensure the accuracy and reliability of designs
• Prepare equipment specifications and data sheets in accordance with international and local codes
• Managing engineering work and interface with other disciplines as needed
• Provide Quality Control/Quality Assurance for work projects
• Display strong communication and interpersonal skills; visit clients, jobsites and consultant offices as needed to support project and business development needs
• Review and critique proposals, plans, or designs related to water or wastewater treatment systems
• Preparation, read and review electrical power designs

Requirements

• Bachelor's degree in Electrical Engineering or a related field
• 1-2 years of experience in electrical design engineering, preferably in the construction or engineering sectors
• Strong proficiency in electrical design software such as AutoCAD, Revit, Dialux, and ETAP
• Knowledge of relevant electrical codes and standards (IEC, NEC, etc.)
• Excellent understanding of electrical principles, equipment, and systems
• Experience in designing lighting, power distribution, and emergency power systems
• Strong analytical and problem-solving skills with an attention to detail
• Effective communication and interpersonal skills to collaborate with project teams and stakeholders
• Ability to manage multiple projects and prioritize tasks in fast-paced environments
• Familiarity with project management tools and methodologies is an advantage

Rawafid is on the lookout for a skilled and innovative Electrical Design Engineer to join our dynamic engineering team. In this essential role, you will be responsible for designing and developing electrical systems for various projects, ensuring that they meet performance, safety, and cost-effectiveness standards. You will work closely with project teams to translate project requirements into design specifications, producing technical documentation and detailed drawings. Your expertise will not only contribute to the successful execution of projects but will also play a key role in enhancing operational efficiency and safety. If you are passionate about electrical design and eager to make an impact in the engineering field, we would love to have you on board.

• Establish electrical and low-current loads required.
• Preparation, reading and reviewing of wiring diagrams, load calculations, cable sizing calculations, earthing calculations, single line diagrams, electrical load lists, lighting calculations, motor data sheets, cable datasheets, small-power layouts, electrical layouts, electrical installations, etc.
• Prepare detailed designs including specifications, drawings and BOQs of Water pumping stations, Lift stations and Water Storage facilities, and water treatment/purification systems, residential and commercial buildings.
• Read and review piping & instrumentation diagrams.
• Assess the quality and quantity of each implementation phase of the project phasing scheme.
• Assess the most suitable, economic and easy way to operate electrical systems.
• Prepare power, lighting, earthing reports and documentation.
• Preparation priced and un-priced of Bill of Quantities (BOQ) for Projects.
• Preparation of project specifications.
• Guiding draftsman/modeler to produce the required drawings.
• Preparation of detailed cost estimates.
• Create and review electrical engineering drawings and specifications.
• Perform calculations and simulations to ensure the accuracy and reliability of designs.
• Prepare equipment specifications and data sheets in accordance with international and local codes.
• Managing engineering work and interface with other disciplines as needed.
• Provide Quality Control/Quality Assurance for work projects.
• Display strong communication and interpersonal skills; visit clients, jobsites and consultant offices as needed to support project and business development needs.
• Review and critique proposals, plans, or designs related to water or wastewater treatment systems.
• Preparation, read and review electrical power designs.

• Bachelor's degree in Electrical Engineering or a related field.
• 1-2 years of experience in electrical design engineering, preferably in the construction or engineering sectors.
• Strong proficiency in electrical design software such as AutoCAD, Revit, Dialux, and ETAP.
• Knowledge of relevant electrical codes and standards (IEC, NEC, etc.).
• Excellent understanding of electrical principles, equipment, and systems.
• Experience in designing lighting, power distribution, and emergency power systems.
• Strong analytical and problem-solving skills with an attention to detail.
• Effective communication and interpersonal skills to collaborate with project teams and stakeholders.
• Ability to manage multiple projects and prioritize tasks in fast-paced environments.
• Familiarity with project management tools and methodologies is an advantage.

Job Title:
Electrical Design Engineer

Location:
Riyadh, Saudi Arabia

Company:
Zawaya Albina Engineering Consultancy

Responsibilities:

• Design and develop electrical systems and layouts for various projects.
• Prepare single line diagrams (SLDs), load schedules, and panel board schedules.
• Design electrical safety systems (fire alarm, emergency lighting, lightning protection, etc.).
• Ensure compliance with Saudi Building Codes (SBC), IEC, and NFPA standards.
• Coordinate with architects, mechanical engineers, and other disciplines.
• Review and approve shop drawings and technical submittals.
• Conduct site visits when required to ensure design implementation.

Requirements:

• Bachelor's degree in Electrical Engineering or a related field.
• Minimum of 7–10 years of experience in engineering consultancy firms.
• Strong proficiency in AutoCAD, Revit, and electrical design software.
• Expertise in designing electrical safety systems, fire alarm, and protection systems.
• Solid knowledge of SBC, NFPA, and international electrical codes.
• Excellent communication and teamwork skills.
• Preferably holds a
  Professional Classification
  from the Saudi Council of Engineers (SCE).

Benefits:

• Professional and collaborative work environment.
• Opportunities for career growth and development.

Job Title:
Electrical Design Engineer

Key Responsibilities:

• Develop and prepare detailed electrical designs for building and infrastructure projects (including power distribution, lighting, low current, and fire alarm systems) using Revit and AutoCAD.
• Ensure all designs are compliant with the
  Saudi Building Code (SBC)
  and relevant international standards (IEC, NEC).
• Coordinate with multidisciplinary teams (architectural, mechanical, and civil) to ensure integrated design solutions.
• Review and verify technical drawings, shop drawings, and specifications for compliance with project requirements and applicable codes.
• Perform electrical load calculations, voltage drop, and short circuit studies.
• Prepare Bill of Quantities (BOQ), technical reports, and design documentation.
• Provide technical support to project teams, consultants, and contractors throughout design and construction phases.
• Participate in value engineering, design review meetings, and resolve technical issues.
• Mentor and guide junior engineers and draftsmen.
• Communicate effectively in English (verbal and written) for coordination, reporting, and documentation.