56 Chemical Analysis jobs in Saudi Arabia

Saipem is a global leader in engineering services for the design, construction, and operation of complex infrastructures and plants in the energy sector, both offshore and onshore.

With our five business lines - Asset Based Services, Energy Carriers, Offshore Wind, Sustainable Infrastructures, Robotics & Industrialized Solutions - we are one company present in around 60 countries with over 30,000 employees of more than 130 nationalities, providing the world with innovative excellence for over 65 years.

Job Description and Requirements

You should have a university degree or equivalent with at least seven years of inspection experience, or a high school diploma with at least ten years of inspection experience. Additionally, you should have a minimum of three years directly related to supervising construction activities within the scope of oil, gas, petrochemical projects, infrastructure, or communication sectors.

Aramco approval in previous projects and passing the CBT (Computer Based Testing) are required.

Mission

• Support the implementation of the Project Quality Management System (PQMS) within the project.
• Assist the Project Quality Manager (PQM) / Quality Control Manager (QCM) in supervising project quality control activities.
• Report project information and data to PQM / QCM following corporate guidelines.
• Coordinate with QCM as the focal point for quality control matters and liaise with external entities.

Tasks

• Define the Project Quality Control System and identify necessary project quality control plans and procedures.
• Assist in planning and allocating QC supervisor functions across the project.
• Review and verify quality control plans, inspection/test plans, and that tests and controls are performed according to plans.
• Check procedures and equipment used in tests and inspections, ensuring they meet operational standards.
• Verify the receipt, storage, identification, traceability, and handling of materials and equipment.
• Ensure proper documentation and certification of tests, controls, and inspections.
• Verify that tests, controls, and inspections are conducted by contractors and that proper quality tools are used.
• Provide support in interfacing with clients and third parties regarding quality issues.
• Ensure site personnel are trained on QC topics.
• Oversee non-conformity detection, recording, and corrective actions.
• Assist in preparing the final dossier's quality section, ensuring thorough collection of QC documentation.
• Collect and analyze project QC data for reporting and review purposes.
• Support lessons learned processes and report project QC information using corporate tools.

How to Apply

If you are ready to take on this challenging role and contribute to Saipem's project successes, please submit your CV in English by clicking the link below.

Start your application process today.

IMPORTANT: Please upload a PDF version of your CV

(The system supports other formats, but PDF enhances additional functionalities to support recruitment.)

I acknowledge that I have read and understood the information notice regarding the processing of personal data of candidates.

About NeproPlast :

NeproPlast is a fast-growing plastic manufacturing company based in Jeddah, dedicated to producing high-quality products for various industries. We are currently looking for a motivated and detail-oriented Entry-Level QC Inspector to join our dynamic team and support our commitment to quality and excellence.

Job General Objectives: Control of production quality during his period (shift).

Job Responsibilities :

• Conduct routine inspection and tests according to SOP and QC inspection and test plan.
• Prepares quality inspection reports.
• Ensures fast and accurate feedback of test results to production department.
• Maintain good working condition of test equipment, tools and measuring instruments.
• Ensure that the calibration of measuring and test equipment he is using is up to date.
• Maintain housekeeping and cleanliness of his working area.
• Perform similar or related works as instructed by his immediate superior.
• Carry out similar or related works as directed by his direct superior.
• Assist in inspecting raw materials, in-process products, and finished goods to ensure they meet quality standards.
• Conduct simple quality control tests and measurements using basic testing tools and equipment.
• Document inspection results and report any defects or issues to the senior QC team.
• Support the production team in ensuring the quality of products during the manufacturing process.
• Learn and apply quality control techniques and procedures under the guidance of experienced team members.
• Maintain a clean and organized work area and ensure compliance with health and safety regulations.
• Participate in basic training on quality standards, manufacturing processes, and safety protocols.

Required Skills, Personal Qualities and Training:

• Observance of cleanliness in his work.
• A calm and patient manner.
• Ability to communicate effectively at all levels.
• Ability to read, write and count.
• Ability to work as part of a team.
• Ability to work under pressure.
• Attendance Punctuality.
• Eliminating waste.
• First Aid, Fire Fighting, Emergency & Evacuation Skills.
• Good appearance and follow the company required uniform.
• Speed and accuracy in performing his work.
• He has the knowledge of the job tasks requirements.

Qualifications :

• High school diploma or equivalent; technical or vocational certification in manufacturing or quality control is a plus.
• Priority for selection will be for Saudi Nationals.
• No prior experience required, but an interest in quality control and manufacturing processes is preferred.
• Strong attention to detail and willingness to learn.
• Ability to follow instructions and work well as part of a team.
• Basic math and measurement skills.
• Good communication skills.
• Ability to adapt to a fast-paced work environment.

Preferred Skills :

• Basic understanding of quality control processes or manufacturing operations (training will be provided).
• Familiarity with common inspection tools and safety equipment is a plus.

Benefits :

• Competitive salary and benefits package.
• Full training and development opportunities to grow your career in quality control and manufacturing.
• Friendly and supportive work environment.

This Position exists to perfrom quality control activities efficiently, in timely manner and quality standards as per the defined policies and procedures to achieve departmental operational plans and developments.

· Plan & organize of in-process, final inspection and testing activities
· provide Speciality in programming & testing of PLC , Synchronization, ATS, soft starter panels etc. & supporting /guiding for team contribution
· Coordinate with projects and other departments for execution of project.
· Verify completed inspection and test reports for correctness
· Coordinate with third party agency & customer for factory inspection. Coordinate with other department & finalize the customer comments to release products as soon as possible
· Prepare project wise inspection & test reports
· Control of non-conforming products ( by raising punch list / NCR and follow up till completion)

HR Proficiency:
•Training of sub-ordinates and forming a team to get the work effectively achieved.
•Provide leadership, coaching, and direction to subordinates in all aspects of their work.
•Delegate sub-ordinates in each respective assignment.
•Ensures fair distribution of tasks to maintain morale, motivation of subordinates.
Delivery:
•Perform the planned activities to meet the operational and development targets as per delivery schedules.
•Utilize resources effectively to achieve objectives within efficient cost and time.
•Provide a periodic report formatted by detailing the deviation and execution of planned tasks.
Problem-Solving:
•Resolve any related problems arise and escalate any complex operational issues.
Quality:
•Ensure quality requirements to develop effective quality control and processes including specifications for products or processes or related activities.
Business Process Improvement (Effectiveness):
•Coordinate well-defined written systems, policies, procedures, and seeking automations opportunities as much as possible.
Compliance:
•Comply to related policy & procedures and work instructions.
Health & Safety:
•Ensure compliance of relevant safety, quality, and environmental management procedures and controls within defined area of work activity to guarantee safety, legislative compliance, and delivery of high-quality products/services.

Bachelor Degree in Electrical Engineering or Mechanical Engineering

Far much that one rank beheld bluebird after outside ignobly allegedly more when oh arrogantly vehement irresistibly fussy penguin insect additionally wow absolutely crud meretriciously.

Far much that one rank beheld bluebird after outside ignobly allegedly more when oh arrogantly vehement irresistibly fussy penguin insect additionally wow absolutely crud meretriciously.

Far much that one rank beheld bluebird after outside ignobly allegedly more when oh arrogantly vehement irresistibly fussy penguin insect additionally wow absolutely crud meretriciously.

Far much that one rank beheld bluebird after outside ignobly allegedly more when oh arrogantly vehement irresistibly fussy penguin insect additionally wow absolutely crud meretriciously.

Get AI-powered advice on this job and more exclusive features.

Industry / Domain: Electrical Manufacturing / Quality Control

Role Purpose:

To support QC Engineers in executing quality control and testing activities on manufactured equipment and (e.g., RMUs, switchgear, panels), ensuring compliance with customer specifications and international standards, thereby contributing to enhanced product quality and customer satisfaction.

Key Responsibilities:

• Conduct in-process and incoming goods inspections as per assigned tasks.
• Perform all testing activities assigned by QC Engineers within the defined schedule.
• Accurately complete and maintain records of testing documents for finished goods.
• Strictly adhere to all local regulations and company health and safety policies at all times.
• Ensure all testing equipment used is properly calibrated and immediately report any deviations to the department head.
• Meet the allocated standard QC hours per product type as per defined targets.

Required Knowledge, Skills, and Experience

Education & Certification:

• Diploma or Degree in Electrical Technology or equivalent qualification.

Experience:

• 1 to 2 years of hands-on experience in quality testing of electrical equipment in a manufacturing environment. (e.g., RMUs, switchgear, panels)

Technical Skills:

• Proficiency in Microsoft Office (Word, Excel, Outlook).
• Practical experience in testing power distribution equipment (e.g., RMUs, switchgear, panels).

• Seniority level Associate

• Employment type Full-time

• Job function Manufacturing
• Industries Appliances, Electrical, and Electronics Manufacturing and Electrical Equipment Manufacturing

Referrals increase your chances of interviewing at Abunayyan Holding by 2x

Get notified about new Quality Control Technician jobs in Riyadh, Saudi Arabia .

We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.

To execute quality control processes, inspection, and documentation in order to meet project specifications and customer expectations, while ensuring compliance with regulatory standards and company policies.

Job Responsibilities:

1) Daily Operations:

• Implement the day-to-day operations assigned to the Quality Control Department to ensure compliance with the established standards and procedures.
• Identify opportunities for continuous improvement of systems, processes and practices considering 'international best practice', improvement of business processes, cost reduction and productivity improvement.
• Review reports of the Quality Control Department timely and accurately to meet company and department requirements, policies, and standards.

2) Specific Job Accountabilities:

• Develop and implement a strategic monthly inspection schedule that optimizes inspector assignments ensuring thorough quality assessments, efficient resource utilization, and alignment with project timelines and quality objectives.
• Review all project quality control documentation, including procedures, inspections, test plans, checklists, forms, etc. ensuring that they meet the project's specifications.
• Proactively address and resolve quality control issues by implementing an effective escalation process to ensure rapid engagement and resolution by senior management.
• Ensure compliance with local and international quality control requirements as well as company policies and procedures.
• Review, sign, and submit QA/QC prepared by inspectors to clients, in a timely and accurate manner.
• Review the Non-Conformity Report (NCR) submitted by the client and conduct root cause analysis, formulate preventive/corrective actions in coordination with QA Team.
• Participate in periodically audits by preparing the required QC documentation and evidence of compliance.
• Monitor and analyse quality control processes to identify opportunities for improvement and implement changes to increase efficiency and quality.

3) Direction of Subordinates:

• Organize and supervise the activities and work of inspectors to ensure that all work is carried out in an efficient and procedurally compliant manner.
• Evaluate team performance, provide formal and informal feedback, identify training needs, and implement development programs to enhance skills and knowledge.
• Provide instructions to subordinates and monitor their adherence to relevant policies and procedures so that work is carried out in a controlled manner.

5) Safety, Quality & Environment:

• Comply with all relevant safety, quality and environmental management policies, procedures and controls to ensure a healthy and safe work environment.

Qualifications:

• Bachelor's degree in industrial or mechanical or any related filed in engineering.
• 7+ years relevant experience in quality control in the construction industry.
• Certificate in ISO 9001 & ISO 45001 is required.
• Leadership, communication, and documentation development skills are required.
• Familiar with construction codes (AWS, EN, AISC, ASME & Aramco)
• Certificates such as Certified Welding Inspector and Certified Coating Inspector are mandatory.

• Seniority level Mid-Senior level

• Employment type Full-time

• Job function Administrative, Engineering, and Other
• Industries Manufacturing, Civil Engineering, and Engineering Services

Referrals increase your chances of interviewing at International Building Systems Factory Co. LTD. by 2x

We're unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.

Job Purpose

Quality Inspector responsibilities include checking all inbound deliveries before receipt. The role ensures quality inspection of all received products to confirm they meet Panda Specifications (where available) and to prevent sub-standard products from entering Panda Food Chain. The inspector must ensure compliance with local (SASO/ SFDA) and international quality and food safety standards.

1. QC - Produce / Deli
2. Schedule and prepare for receiving fresh deliveries daily.
3. Follow the DC receiving SOP and sampling plan for product receiving and inspection in coordination with the TL.
4. Check temperatures of vendor vehicles and products before offloading and dispatching deliveries to stores.
5. Inspect products and recommend to the TL and Assistant QC Manager whether to receive or reject deliveries based on product specifications.
6. Document all non-conformities with photos and report them to the TL.
7. Accurately complete all receiving logs and inspection checklists on time.
8. Ensure proper storage practices according to product categories and storage conditions.
9. Ensure conformance to Panda Receiving Processes.
10. Check Brix and firmness for fruits based on specifications.
11. Monitor the pest control system in the DC to prevent pest infections.

• Diploma required; college level preferred.
• Familiarity with QA regulations set by the Corporate QA Team.
• Proficiency in English; knowledge of Arabic is an advantage.
• Ability to work independently and be self-motivated.
• Strong leadership and decision-making skills.
• Ability to recommend improvements to standards and processes.
• Ability to justify rejection of deliveries with technical explanations.
• Proficient in computer skills, including email, reporting, digital photography, and use of industrial thermometers.
• Previous experience in related fields, especially in fresh produce, grocery foods, is mandatory.

Job Purpose

The Quality Inspector is responsible for inspecting all inbound deliveries before acceptance.

The role involves ensuring that all received products meet Panda Specifications (where available) and that no sub-standard products enter the Panda Food Chain.

Compliance with local (SASO, SFDA) and international quality and food safety standards is essential.

Functional Responsibilities:

QC - Produce / Deli

• Scheduling and preparing for receiving fresh deliveries daily.
• Following the DC receiving SOP and applying sampling plans during product reception in coordination with the TL.
• Checking the temperature of vendor vehicles and products before offloading and prior to dispatch to stores.
• Inspecting products and making recommendations to the TL and Assistant QC Manager to receive or reject deliveries based on set specifications.
• Documenting all non-conformities with photographs and reporting them to the TL.
• Accurately completing all required documentation, including receiving logs and inspection checklists.
• Ensuring proper storage practices according to product categories and conditions.
• Adhering to Panda Receiving Processes.
• Checking Brix and firmness for relevant fruits based on specifications.
• Monitoring the pest control system in the DC to prevent pest infestations.

Embark on an exciting opportunity in Saudi Arabia as a Quality Control Supervisor with a renowned Drilling and Construction Contractor onshore. If you are ARAMCO approved and have a keen eye for detail, this role is perfect for you!

Requirements:

• Control Supervisor shall have a university degree OR equivalent and a total of seven years inspection experience OR a high school diploma with a total of ten years inspection experience . At a minimum, he shall have three (3) years directly relating to supervision of construction activities in the Contract Scope of WORK (e.g., oil, gas and petrochemical projects, Infrastructure, communication).
• ARAMCO approved
• Strong understanding of onshore construction processes.
• Excellent communication and analytical skills.

Embark on an exciting opportunity in Saudi Arabia as a Quality Control Supervisor with a renowned Drilling and Construction Contractor onshore. If you are ARAMCO approved and have a keen eye for detail, this role is perfect for you!

Requirements:

• Control Supervisor shall have a university degree OR equivalent and a total of seven years inspection experience OR a high school diploma with a total of ten years inspection experience . At a minimum, he shall have three (3) years directly relating to supervision of construction activities in the Contract Scope of WORK (e.g., oil, gas and petrochemical projects, Infrastructure, communication).
• ARAMCO approved
• CBT passed
• Strong understanding of onshore construction processes.
• Excellent communication and analytical skills.

• Job Title: Quality Control Supervisor
• Projects: Onshore Saudi Arabia
• Location: KSA
• Rotation: Various rotation schemes are on offer, 120/16 days on/off - 60 weekly hours OR 75/21 for 60 weekly hours
• There is also the possibility of offshore missions.
• Payment is monthly, during on and off days
• Salary: Please state your realistic expected monthly wage when applying. This will be discussed with the right candidate.
  
• Start date: TBC
  
• Travel, accommodation and food provided by the company during the days on

Company Industry

• Shipping

Department / Functional Area

• Quality
• Testing
• QA
• QC
• Inspector

Disclaimer: is only a platform to bring jobseekers & employers together. Applicants are advised to research the bonafides of the prospective employer independently. We do NOT endorse any requests for money payments and strictly advice against sharing personal or bank related information. We also recommend you visit Security Advice for more information. If you suspect any fraud or malpractice, email us at

Job Accountability & Activities:

1. Develop and maintain the document system that controls the organization's quality standards, including amending, reviewing, and issuing.
2. Ensure all personnel are adequately trained on procedures affecting their job function and aware of their role within the QA system.
3. Coordinate and execute internal Quality Audits at least twice a year to ensure correct implementation of the Quality Assurance System.
4. Maintain contract with the official certification organization and manage inspection and calibration records.
5. Identify and eliminate non-conformances within the quality system, and ensure corrective actions are taken.
6. Identify and implement training for personnel on quality assurance needs, especially for system changes.
7. Register and follow up on customer, internal, and supplier complaints.
8. Prepare pre-qualification documents, technical submittals, and marketing materials.
9. Update catalog and maintain technical standards and specifications.
10. Coordinate internal sales activities, including follow-up on quotations and customer technical support.
11. Prepare and control the company's QA manual and all quality documentation.
12. Perform internal and external audits on behalf of the company's management.
13. Verify customer quality requirements documentation submittals.
14. Monitor the progress and effectiveness of the project quality management system and recommend improvements.
15. Coordinate quality-related correspondence with customers.
16. Review and amend the QMS to suit changing business trends and organizational structure.
17. Handle customer third-party audits and initiate necessary corrective and preventive actions.
18. Manage the calibration and maintenance of measuring/testing equipment.
19. Review the correctness of job-specific quality records prior to issuance to clients.
20. Ensure consistent conformity of products/services to meet customer satisfaction.

Experience/Education & Certification:

• Bachelor's degree in Engineering, preferably Polymer engineering.
• ISO 9001, 14001, and 45001 internal Auditor or Lead Auditor Certification.

Behavior Skills/Competencies:

• Decision-making
• Teamwork
• Demonstrable experience in quality auditing
• Initiative-taking
• Experience in document management processes
• Good communication skills
• Commitment to Quality
• Effective, analytical, and problem-solving skills
• Ability to supervise others
• Effective computer skills

Required Experience:

5-6 years experience in a similar work environment, with a preference for manufacturing experience.

If you are interested, please share your CV with the job title to: .

You can also share it in the form.