305 Battery Systems jobs in Saudi Arabia

Process Engineer (Mechanical/Renewable Energy/Energy Efficiency)

Join us to apply for the Process Engineer (Mechanical/Renewable Energy/Energy Efficiency) role at Penspen .

This position is based in Al Khafji, KSA, and involves supporting the development of the energy management system, including:

• Developing and maintaining the energy management system
• Organizing and coordinating its execution
• Optimizing energy efficiency to minimize plant energy consumption while ensuring utility supply stability
• Minimizing disruptions in energy utility supply
• Establishing energy audits and decarbonization programs for rotating equipment
• Analyzing design and operational issues such as oversizing and excessive recycling
• Conducting plant-wide surveys to identify major energy-consuming equipment
• Implementing energy-saving measures, including retrofitting
• Deploying online monitoring instruments for critical equipment to enable real-time performance tracking
• Identifying process improvement opportunities based on best practices and lessons learned

Qualifications: Bachelor's degree in electrical, mechanical, environmental, or chemical engineering or a related field.

Experience: At least 8 years, with 4 years in Process Engineering, Mechanical Engineering, Renewable Energy, or Energy Efficiency for major Oil and Gas or Petrochemical projects.

If interested, please apply via the following link: Apply Here or send an email to

#J-18808-Ljbffr

NGHC Electrical Engineer – Battery Energy Storage System (BESS) Plant

NEOM Green Hydrogen Company Limited (NGHC)

NEOM Green Hydrogen Company (NGHC) is on a mission to make a carbon-free, climate-safe future a reality. We are building the world’s largest plant to produce green ammonia at scale, providing humankind with a cost-efficient solution that will accelerate the worldwide green hydrogen economy. Located in NEOM and supporting Saudi Arabia’s Vision 2030, NGHC will be integrating up to 4GW of onshore solar and wind energy to supply up to 650 tons of green ammonia per day for transportation globally. Operations will go onstream in 2026.

JOB DETAILS

Division: Power Elements (PWE) Operations
Group: O&M PWE - BESS
Reports To: Senior Maintenance Manager

POSITION SUMMARY

The Electrical Engineer BESS shall be responsible for supporting and enabling a reliable & efficient operation and maintenance of a 450MW Battery Energy Storage System (BESS) in the NEOM region. The main objective is to ensure safe, reliable & efficient operation of the BESS plant by ensuring the safety of plant personnel and assets.

NATURE & SCOPE

The main functions of this position are:

• Possess expert-level technical, electrical engineering management skills and knowledge in BESS Plant Electrical engineering, Operations and Maintenance tasks, along with excellent communication and influencing skills.
• Support the Operation & Maintenance of BESS plant systems.
• Actively participate in plant O&M activities, commissioning activities & safety compliance workshops.
• Propose continuous improvement suggestions to elevate & enable the best plant O&M practices.
• Develop systems and practices to encourage continuous workflow improvements and increase asset productivity and efficiency.
• Organize workshops to discuss critical issues with proposed solutions based on root cause analysis or revised OEM recommendations.
• Participate in EPC contractor site installation, testing, and commissioning activities from an O&M perspective.

PRINCIPAL DUTIES AND RESPONSIBILITIES

• Ensure the team monitors, maintains & restores BESS systems (batteries, inverters, and associated systems) within the minimum time frame by performing necessary troubleshooting methods in line with OEM recommendations.
• Assist Construction & QC with inspection and punch lists of installation and vendor packages.
• Review mechanical completion for systems and sub-systems packages.
• Organize and document pre-commissioning and commissioning procedures and participate in system performance testing.
• Review and ensure that the TurnOver Packages / Final Documentation is complete from a maintenance perspective.
• Develop plant operation and maintenance procedures and work instructions based on OEM manuals and standard industry practices.
• Identify & develop operational and strategic spares for smooth and reliable plant operation.
• Develop the technical scope of work for contractors or service providers.
• Support & supervise the team to ensure the best O&M practices are being followed & executed.
• Enhance maintenance planning & scheduling by considering resource availability (tools, equipment & manpower) to optimize maintenance time & cost.
• Propose continuous improvement programs contributing to safe, reliable, productive & cost-effective O&M practices.
• Organize & participate in root cause analysis workshops for any plant issues.
• Generate comprehensive incident reports for any events occurring in the plant in coordination with the operation team.
• Conduct monthly review meetings with operation teams to discuss O&M philosophy & performance key points.
• Coordinate & provide necessary data & documents to the Engineering team for analysis & review upon request.
• Supervise & support commissioning activities to ensure compliance with approved procedures, method statements & risk assessments.
• Perform frequent site audits to verify that O&M practices are being performed according to standard procedures.
• Guide the operation team for effective usage of the Plant CMMS system to build the historical database for real analytics.
• Expertly identify & resolve plant issues related to maintenance, operations & performance.
• Proactively monitor asset condition and recommend corrective measures or life enhancement strategies.
• Deep understanding of electronic, pneumatic, and hydraulic systems with knowledge of various instruments.

TEAM MANAGEMENT & TRAINING

• Encourage & guide the team towards best O&M deliverables & align company objectives with individual employee objectives.
• Ensure team engagement in all training programs as per the company training matrix.

WARRANTY MANAGEMENT

• Generate warranty claims for defects to various suppliers under the warranty period.
• Ensure required information, data & documents are maintained & submitted to suppliers timely upon request.

SPARE PART MANAGEMENT

• Maintain spare part storage conditions as per OEM recommendations.
• Monitor critical spare part & consumable availability in the warehouse to avoid downtime or delays in equipment restoration/maintenance.

REPORTING MATRIX & DOCUMENTATION

• Audit the Maintenance team to ensure relevant documents are maintained in line with O&M agreements & OEM recommendations.
• Manage plant maintenance records effectively.
• Report any plant issues to the line manager and concerned departments promptly along with possible root cause, restoration plan & future preventive actions.

HSSE

• Ensure the O&M team & subcontractors/suppliers obtain PTW for each job and monitor onsite for HSE compliance mitigations.
• Engage with the site team to identify new hazards from ongoing or new tasks.
• Participate in reviewing/revising task risk assessments (TRA) regularly.
• Assist in executing emergency response drills and investigations as needed.
• Ensure PTWs for all activities are issued as per approved WMSRA/PTW/LOTO system.
• Verify isolation & LOTO procedures for critical maintenance activities.

SKILLS / TECHNICAL KNOWLEDGE AREAS:

• Proficient in Microsoft Operating System (MS Office).
• In-depth knowledge of Electrical/electronic engineering and good knowledge of Mechanical components in BESS Plant systems.
• Leadership and negotiation skills with proactive team management.
• Ability to describe Plant Performance Issues effectively.
• Good knowledge of BESS Inverters System, Substation Operation & Maintenance preferably HV/MV GIS substation.
• Advanced analytical and technical skills with knowledge of electrical and mechanical equipment, as well as instrumentation & electrical testing equipment.
• Deliverables on Time, Leadership & Adaptability: Enthusiastic & energetic to provide required deliverables within the time frame with quality standards.
• Understanding of fault reports & logs.
• Awareness of Power Plant Controllers.
• Specialized in MV/HV system Operations, Switching sequence preparations, Plant Performance report preparation & analytics.
• Sound knowledge of electrical systems such as Power Transformers, Substations (GIS), Inverters, RMUs, etc.

ESSENTIAL EDUCATION QUALIFICATIONS REQUIRED

• A bachelor’s degree in electrical or Electromechanical Engineering with a minimum of 5+ years of experience in a BESS plant capacity greater or equal to 100MW.
• Sound knowledge of electrical systems such as Power Transformers, BESS systems, Substations (GIS), Inverters, RMUs, etc.

Seniority level

Mid-Senior level

Employment type

Full-time

Job function

Other

Industries

Chemical Manufacturing

#J-18808-Ljbffr

Physical Science and Engineering Division

Organisation/Company KAUST Department Physical Science and Engineering Division Research Field Engineering » Materials engineering Researcher Profile First Stage Researcher (R1) Positions Postdoc Positions Country Saudi Arabia Application Deadline 15 Apr 2026 - 23:59 (Asia/Riyadh) Type of Contract Temporary Job Status Full-time Hours Per Week 40 Offer Starting Date 15 Apr 2025 Is the job funded through the EU Research Framework Programme? Not funded by a EU programme Is the Job related to staff position within a Research Infrastructure? No

• Develop and optimize hard carbon synthesis processes using bio-based and non-bio-based precursors.
• Explore innovative methods to enhance material properties for energy storage applications and other emerging technologies.
• Conduct detailed structural, chemical, and electrochemical characterizations of synthesized hard carbon materials. Analyze material performance using advanced techniques such as XRD, SEM, TEM, BET, Raman spectroscopy, and electrochemical testing.
• Collaborate with interdisciplinary teams, including chemists, material scientists, and engineers.
• Manage day-to-day research activities, including experiment design, execution, and troubleshooting.
• Publish research findings in high-impact journals and present at international conferences.

About CREST:

The Center for Renewable Energy and Storage Technologies (CREST) at KAUST aims to develop renewable energy and storage technologies that help Saudi Arabia achieve its environmental and economic goals. Through strategic partnerships, cutting-edge research, and workforce training, the center will spearhead the prototyping and eventual commercialization of renewable energy and storage solutions that secure the Kingdom’s industrial competitiveness and empower its ambition to expand into new sustainability-centered economic sectors. CREST aims to focus on home-grown technologies, invented at KAUST.

About KAUST:

KAUST is located on the shores of the Red Sea near Jeddah, Saudi Arabia, and welcomes exceptional students, researchers, and faculty from around the world. Our university is internationally diverse with over 100 Nationalities living and working on campus. KAUST boasts world-class equipment, research and recreational facilities, and computational resources. It is the leading university in citation per faculty according to the QS Rankings. Further information can be found at .

• Ph.D. in Materials Science, Chemistry, Chemical Engineering, or a related field with a focus on carbon materials or energy storage.
• Strong experience in the synthesis of hard carbon materials from bio-based or non-bio-based precursors. Proficiency in material characterization techniques such as XRD, SEM, TEM, Raman spectroscopy, BET analysis, and electrochemical testing.
• Demonstrated ability to design and conduct experiments, analyze data, and interpret results effectively.
• Strong track record of publishing research findings in peer-reviewed journals.
• Ability to work collaboratively in multidisciplinary teams and communicate effectively with team members from various scientific backgrounds.
• Strong problem-solving skills and a passion for advancing sustainable technologies.

Languages ENGLISH Level Good

Research Field Engineering » Materials engineeringEngineering » Chemical engineeringChemistry Years of Research Experience 1 - 4

Additional Information

• Competitive tax-free salary
• Free on-campus housing
• Health insurance
• 22 days of annual vacation
• Additional benefits

Eligibility criteria

• Ph.D. in Materials Science, Chemistry, Chemical Engineering, or a related field with a focus on carbon materials or energy storage.
• Strong experience in the synthesis of hard carbon materials from bio-based or non-bio-based precursors. Proficiency in material characterization techniques such as XRD, SEM, TEM, Raman spectroscopy, BET analysis, and electrochemical testing.
• Demonstrated ability to design and conduct experiments, analyze data, and interpret results effectively.
• Strong track record of publishing research findings in peer-reviewed journals.
• Ability to work collaboratively in multidisciplinary teams and communicate effectively with team members from various scientific backgrounds.
• Strong problem-solving skills and a passion for advancing sustainable technologies.
• Please do not send your CV to the Professor through e-mail or LinkedIn account. Candidates who do so will be excluded.
• Candidates whose research is not related to the advertised positions will be disqualified from current and future consideration.

Number of offers available 1 Company/Institute King Abdullah University of Science and Technology (KAUST) Country Saudi Arabia State/Province Makkah City Thuwal Postal Code 23955 Street Building 9 #J-18808-Ljbffr

MEET-KSA-Jazan-JIGPC

**Job Description and Qualifications**

**Purpose**
To lead in providing Electrical Engineering oversight to ensure safe & reliable operation of plant facilities under JIGPC in Jazan, Saudi Arabia.**Nature & Scope**
Properly functioning Electrical systems and equipment are critical to the safe, reliable, and efficient operation of the plant facilities and associated equipment & systems. As a member of the site engineering team, the Sr. Electrical Engineer will lead to interact routinely with plant operations, maintenance, and engineering personnel to provide “hands-on” field-engineering & troubleshooting support, instructions, and technical guidance related to the site’s Electrical systems & equipment including: large high voltage induction and synchronous motors and starting systems including reduced voltage autotransformers, electrical protection relays, low voltage and high voltage distribution systems, high voltage power-factor-compensation units, motor control centers & switchgear, and a variety of specialized electronic / electrical equipment. The position emphasizes teamwork, communications, organization, change management, work process optimization, planning, leadership, and hands-on technical skills with comprehensive knowledge across engineering disciplines.**PRINCIPAL ACCOUNTABILITIES**

**Safety**
- Provide & maintain a safe work environment for self & others. Employ good housekeeping methods and demonstrate leadership with all company & industry safe work processes to prevent injuries.

**Engineering**:

- Lead in the provision of engineering evaluation & determinations, issue technical direction & guidance, and oversee Inspection & Quality Assurance initiatives for all Electrical troubleshooting, maintenance, calibration, repair, and test activities.
- Lead in the provision of engineering support & guidance during the construction & commissioning of the plants. Maintain accurate documentation for plant’s electrical equipment and validate single line electrical drawings for the plant’s electrical distribution systems. Monitor quality assurance initiatives.
- Lead in performing electrical system studies including short circuit, load flow, transient motor start, protection relay coordination, arc flash, etc., and establish appropriate protective device settings.
- Lead in the provision of engineering guidance to ensure reliability and maintainability of equipment, processes, utilities, facilities, controls, and safety/security systems.
- Lead in the provision of engineering input for development and maintenance of Electrical systems & equipment standards, procedures, best practices, inspection contracts, and contractor selection guidelines.
- Develop detailed engineering specifications, evaluate quotations, perform technical bid evaluations & vendor document review, and validate factory acceptance testing related to the procurement of Electrical equipment and system components.
- Maintain compliance with all Critical Safety Circuits (CSS), Safety Integrity Levels (SIL), and Safety Instrumented Systems (SIS) implementation and revalidation programs.
- Develop, implement, and manage a comprehensive risk-based inspection and calibration program for all Electrical systems & equipment.
- Establish & maintain a relationship with the local inspection bureau, maintain relevant statutory, regulatory, technology standards, and code information consistent with JIGPC plant operational objectives and local regulations.
- Utilize predictive and other non-destructive inspection & test methodologies to identify and isolate inherent reliability problems.
- Employ appropriate project development and project management activities (including scope, budget, schedule, execution strategies, risk plans, cost collection / reporting, etc.) for the execution of all projects and turnaround activities.
- Provide engineering support to develop the annual budget for Electrical Systems & Equipment maintenance, repair, and major turn-around activities.
- Promote an atmosphere of team spirit through good example, open communication, good listening, and timely problem resolutions.
- Drive continuous improvement in safety performance, reliability, and cost of quality goals.
- Establish & maintain relationships with regional pressure system equipment suppliers
- Foster and support positive working relationships with internal and external customers.

**JOB REQUIREMENTS**
- Engineering graduate (BSEE preferred) with >12 years of relevant experience in electrical chemical / refinery / gas plant maintenance / inspection / engineering.
- Demonstrated knowledge & experience performing detailed power system engineering studies including short circuit, load flow, transient motor start, protection relay coordination, arc flash, etc., and establish appropriate protective device settings.
- Knowledge & understanding with the principles of: Safety Integrity Level (SIL), Safety Instrumented System (SIS), Safety in

**Job Overview**

The Power Systems Manager is a full-time role that will support the Asset & Maintenance Team in their oversight and supervision of the Operations & Maintenance (O&M) Contractors for the Riyadh Metro Project. The expertise of the **Power Systems Manager **will ensure that the High Voltage, Medium Voltage, Low Voltage and Traction Power Systems used and maintained by the O&M Contractors will perform at the highest level of safety, efficiency, availability and reliability. The performance of HV, MV, LV and Traction Power Systems will be intrinsic to delivering a world-class metro service for Riyadh.

Our Client requires the person appointed to this role to have a minimum of 10 years’ management and technical experience within this area of expertise in a railway environment.

SNC-Lavalin Projects and O&M Services is a business unit of SNC-Lavalin Group. We provide a full range of project management, programme management, construction management, engineering services, consulting services and operation and maintenance services across the MENA region. Active in the Middle East for over 40 years, we have offices in the Saudi Arabia, UAE, Qatar, Oman, and Egypt. for transportation and other infrastructure programmes.

**Responsibilities & Duties**
- Demonstrate understanding of the safety significance in the operation and maintenance of the High, Medium and Low Voltage systems and Traction Power Systems in a railway environment and always place this safety as the highest priority;
- Technical management of Subject Matter Experts for **MV/LV Power Systems** and **Traction Power Systems;**
- Review the O&M Contractors’ submissions for MV/LV Power Systems and Traction Power Systems including asset and maintenance plans, procedures and work instructions;
- Support the coordination of the O&M Contractors with the Design & Build (D&B) Contractors with respect to MV/LV Power Systems and Traction Power Systems;
- Oversee and report on MV and LV and Traction Power Systems maintenance delivery activities by O&M contractors, verify that it is being carried out safely and to the Employer’s satisfaction;
- Responsible for measuring O&M Contractors’ performance in relation to MV and LV and Traction Power Systems, (must be capable of evaluating and adjusting performance where and when required);
- Advise on the Asset Management and Maintenance Strategy relating to MV and LV and Traction Power Systems;
- Monitor, audit and report Key Performance Indicators (KPI) relating to MV, LV and Traction Power Systems;
- Represent and support the Senior Asset & Maintenance Manager as needed; and Perform other duties as directed, in support of the Asset & Maintenance Team and the project.

**Qualifications**
- Technical management of engineering teams or similar;
- High, Medium and Low Voltage power supply networks, MV cable networks, MV distribution substations and MV switching stations and MV & LV switchgear;
- 750V to 1500V DC traction power systems including traction power substations
- AC and DC switchgear, HSCBs, VLDs, transformers, rectifiers, inverters, energy regeneration and AC & DC control & protection devices.
- Earthing, Bonding and Stray current mitigation/protection;
- LV power distribution systems, Lighting & small power distribution, Emergency Backup LV Generators, Power Factor Correction, UPS systems, and Central Battery Systems.

**Skills and Aptitude**
- Able to work within a collaborative team that promotes sharing of knowledge and experience.

**Additional Project Requirements**
- Additionally, having a good command of Arabic would be a distinct advantage.

**Personal Qualities**
- Demonstrate reliability and responsibility
- Have good problem-solving skills through creative thinking and analysis
- Work to tight deadlines and complete tasks.
- Working with multiple priorities.
- Managing project deadlines.
- Able to work in a collaborative multicultural environment
- Highly motivated and passionate about their work
- Additionally, having project/team management skills would be a distinct advantage

**Rewards & Benefits**

**We offer an excellent package which includes**:

- A competitive salary
- Transportation allowance
- 21 calendar days annual leave
- Medical insurance cover
- Company gratuity scheme
- Discretionary bonus scheme
- Annual flight allowance to point of origin

WSP is looking for Principal Engineer – Power System Studies with over 10-15 years’ experience of providing technical leadership to deliver the projects while meeting the contract requirements with respect to quality, time and budget. The incumbent will be providing overall technical leadership to the WSP clients in the region and will be acting as the single point of contact for all the middle east clients while also being involved in the business development activities.

The key objectives of the roles are to:

• Power system analysis of transmission and distribution projects.

• Feasibility studies, masterplans, despatch studies, renewable integration, grid code reviews

• Preparation of Renewable generation connection schemes from distribution to utility scale generation including determining techno-economical optimum amount of renewable generation.

• Load flow study, fault level calculations, harmonic analysis, voltage stability and transient stability analysis on transmission, distribution, and industrial power systems, using DIgSILENT, PSS/E, PLEXOS, ETAP, CYME PSAF, ASPEN OneLiner, ASPEN database and IPSA+.

• Review all the Power System Studies technical submittals by EPC contractor / Developers in reference to Client’s Electricity Transmission Code and International standards as applicable.

• Review the Power system models developed by EPC contractor specific to each study.

• Attend all the required meetings & address all the technical clarifications raised by EPC contractor / Developer.

• Attend the FAT & SAT visits to ensure all the performance criteria are met related to grid compliance requirements. The test shall be conducted with RTDS or other similar tools.

• Review the updated model received from EPC based on FAT/SAT reports and ensure all the grid compliance requirements are met as agreed during the detail design stage.

• Assist Client to incorporate equipment models provided by EPC contractor into the TRANSCO network PSSE & PSCAD models suitable for various planning studies (steady state and dynamics).

• The power system studies review work shall briefly include, but not limited to the following:

• Reactive power capability study

• Grid impact study

• Transient and dynamic stability studies

• Insulation co-ordination study

• Switching transient study

• Faulted transient switching study

• Transformer Energization study

• AC/DC harmonics and flicker study

• AC/DC harmonic filter sizing report

• Harmonic impedance locus identification and analysis study

• AC protection relay setting coordination study

• Sub-synchronous resonance studies

• All required ETC compliance studies

We'd love to hear from you if you have:

• Master’s Degree in Electrical / Power systems Engineering.

• Minimum 10-15 years of working experience with similar capacity.

• Proficient with Power system study softwares like PSS Sincal, PSSE, PLS CAD, Dig silent etc.

• Must have experience in Power System Studies, Grid Impact studies, on Transmission and Distribution projects etc.

• Having indepth knowledge of software languages (Python/Java) to automate the processes will be an added advantage.

• Incumbent is expected to have prior experience of working with electrical utilities like TRANSCO/SEC/ADDC having successfully delivered Power System Studies related projects.

• People managing skill, with excellent written and verbal skills. Able to build excellent client relations through communication and multidisciplinary coordination skills

Imagine a better future for you and a better future for us all.

Join our close-knit community of talented individuals who share your passion for making a positive impact. Our global team includes more than 69,000 employees, working together to make a difference in communities both close to home and around the world.

With us, you can. Apply today.

LI#Onsite

#J-18808-Ljbffr

WSP is seeking a Principal Engineer – Power System Studies with over 10-15 years of experience providing technical leadership in project delivery, ensuring quality, timeliness, and budget adherence. The role involves leading technical activities for WSP clients in the Middle East and acting as the primary contact, as well as participating in business development.

Responsibilities

The key objectives of the role include:

1. Conducting power system analysis for transmission and distribution projects.
2. Performing feasibility studies, masterplans, dispatch studies, renewable integration, and grid code reviews.
3. Preparing renewable generation connection schemes, including techno-economic optimization.
4. Executing load flow, fault level, harmonic, voltage stability, and transient stability analyses using tools like DIgSILENT, PSS/E, PLEXOS, ETAP, CYME PSAF, ASPEN OneLiner, and IPSA+.
5. Reviewing technical submittals from EPC contractors and developers in accordance with client standards and international codes.
6. Assessing power system models developed by contractors for each study.
7. Participating in meetings and addressing technical clarifications.
8. Overseeing FAT & SAT visits to verify performance and grid compliance, utilizing RTDS or similar tools.
9. Reviewing updated models post-FAT/SAT to ensure compliance.
10. Assisting clients in integrating equipment models into TRANSCO network PSSE & PSCAD models for planning studies.
11. Conducting various power system studies, including reactive power capability, grid impact, stability, insulation coordination, switching transients, harmonics, relay settings, sub-synchronous resonance, and compliance studies.

Qualifications

We'd love to hear from you if you have:

1. A Master’s Degree in Electrical or Power Systems Engineering.
2. 10-15 years of relevant experience.
3. Proficiency with power system study software such as PSS Sincal, PSSE, PLS CAD, DIgSILENT.
4. Experience in power system studies and grid impact assessments for transmission and distribution projects.
5. Knowledge of software programming languages (Python/Java) for process automation is a plus.
6. Prior experience working with utilities like TRANSCO, SEC, or ADDC on similar projects.
7. Strong client relations, communication, and coordination skills.

Join our community of talented individuals committed to making a positive impact worldwide. Apply today!

LI#Onsite

Job Info

• Job Identification: 72212
• Location: FC-24, First Floor, Noida, UP, 201301, IN

#J-18808-Ljbffr

The driving force behind our success has always been the people of AspenTech. What drives us is our aspiration, desire, and ambition to keep pushing the envelope, overcoming hurdles, and challenging the status quo to find better solutions. These qualities of passion, pride, and aspiration are reflected in our career development programs, community service projects, and social events that foster fun and relationship building across our global community.

The Role

DGM's Advanced Distribution Management System (ADMS) is a high-growth area that enables electric distribution utilities to monitor, manage, control, and optimize the grid. As an Intermediate ADMS Project Consultant, you will be involved in all aspects of delivering systems to our customers. You will leverage your experience with utility operations, ADMS systems, and business processes to lead and advise utility clients during ADMS implementation. You will be a trusted advisor, engaging with all levels of the utility from field crews to executive management. You will collaborate with DGM's teams, including ADMS Application Engineers, Architecture and Product Solution teams, and Software Development. Your insights will influence the future direction of ADMS products and serve as the 'voice for the utility' within DGM. This role reports to the Manager, ADMS Project Consulting.

Your Impact

1. Lead ADMS business process reviews to understand current ('As-Is') and future ('To-Be') process mappings.
2. Conduct contractual requirements analysis on ADMS projects to identify potential concerns.
3. Provide insights, guidance, and recommendations to clients, project teams, and product development based on utility knowledge and experience.
4. Promote the importance of project change management to build knowledge and support within ADMS projects.
5. Stay informed about advancements in digitalization, analytics, security, markets, and operational technology within the electric grid industry.
6. Support ADMS project implementation teams through analysis, design, and testing activities as needed.

What You'll Need

• Bachelor's degree in engineering or a related field.
• At least 5 years of project implementation or operational experience, preferably in the utility industry.
• Ability to travel up to 25% domestically and internationally.
• Knowledge of industry standards and trends.
• Experience with electrical utility control systems (SCADA, EMS, GMS, DMS, OMS, DERMS) or utility operations/support roles.
• Excellent communication, organizational, interpersonal, analytical, and problem-solving skills.
• Ability to manage multiple projects in a fast-paced environment.
• Understanding of Business Analysis and Change Management concepts.
• Strong commitment to customer service.

The salary range for this role is $99,400 - $124,300, with potential for bonuses and comprehensive benefits, including paid time off, insurance, and retirement plans. Compensation may vary based on experience and other factors, and the range may be adjusted in the future.

#J-18808-Ljbffr

WSP is seeking a Principal Engineer – Power System Studies with over 10-15 years of experience providing technical leadership in project delivery, ensuring quality, timeliness, and budget adherence. The role involves leading technical activities for WSP clients in the Middle East and acting as the primary contact, as well as participating in business development.

Responsibilities

The key objectives of the role include:

1. Conducting power system analysis for transmission and distribution projects.
2. Performing feasibility studies, masterplans, dispatch studies, renewable integration, and grid code reviews.
3. Preparing renewable generation connection schemes, including techno-economic optimization.
4. Executing load flow, fault level, harmonic, voltage stability, and transient stability analyses using tools like DIgSILENT, PSS/E, PLEXOS, ETAP, CYME PSAF, ASPEN OneLiner, and IPSA+.
5. Reviewing technical submittals from EPC contractors and developers in accordance with client standards and international codes.
6. Assessing power system models developed by contractors for each study.
7. Participating in meetings and addressing technical clarifications.
8. Overseeing FAT & SAT visits to verify performance and grid compliance, utilizing RTDS or similar tools.
9. Reviewing updated models post-FAT/SAT to ensure compliance.
10. Assisting clients in integrating equipment models into TRANSCO network PSSE & PSCAD models for planning studies.
11. Conducting various power system studies, including reactive power capability, grid impact, stability, insulation coordination, switching transients, harmonics, relay settings, sub-synchronous resonance, and compliance studies.

Qualifications

We'd love to hear from you if you have:

1. A Master’s Degree in Electrical or Power Systems Engineering.
2. 10-15 years of relevant experience.
3. Proficiency with power system study software such as PSS Sincal, PSSE, PLS CAD, DIgSILENT.
4. Experience in power system studies and grid impact assessments for transmission and distribution projects.
5. Knowledge of software programming languages (Python/Java) for process automation is a plus.
6. Prior experience working with utilities like TRANSCO, SEC, or ADDC on similar projects.
7. Strong client relations, communication, and coordination skills.

Join our community of talented individuals committed to making a positive impact worldwide. Apply today!

LI#Onsite

Job Info

• Job Identification: 72212
• Location: FC-24, First Floor, Noida, UP, 201301, IN

#J-18808-Ljbffr